How to assemble the jupiter z, vega zr, mx, mio headlight cable lines. the steps we have to do is to know the 4 color lines and functions on the kiprok socket. namely:
1. The yellow cable under the left is the main path for lighting the lamp from the road spool that enters the kiprok and will be removed again by the yellow cable to the front or rear light strum, and to make sure there is current or not from the spool, you can use a used cable and attach it to the body motor while cranked.
2. The plain black cable above the left is the time for kiprok and make sure it must be attached to the motor body.
3. Plain white cable above right as a charging line from the spool which goes directly to the kiprok and is removed again with the red cable.
4. The red cable under the right is the kiprok output current that goes to the battery plus and is connected to the ignition.
And to assemble the headlight cable path, we take the yellow cable that goes straight to the front.
And make sure the timing of the firing lamp or the lamp pit is connected to the motor body.
Thank you very much to all #SUBSCRIBER# and viewers, hopefully the knowledge is useful.
Please #SUBSCRIBE AND LIME#
If you have questions, you can write them in the comments.
Tel/WA 085863491419
Thank you very much.
9 сен 2024
