How to Be Safe While Welding

Подписаться 382 тыс.

Просмотров 49 тыс.

50% 1

No project is worth a major injury or illness. Welding can be very rewarding, but there are also several hazards to protect against. Let's look at some of the most important ways to keep yourself safe.
Lincoln Electric Safety Guide (with lens shades): www.lincolnele...
***Affordable self-paced welding courses taught by me***
courses.timwel...
***Where to Buy Practice Metal and Weld Kits***
USE DISCOUNT CODE 'TIMWELDS' TO SAVE 10%
weldmetalsonli...
***Where to Buy Top Quality Welding Machines and Accessories***
USE DISCOUNT CODE 'TIMWELDS' TO SAVE 5%
www.usaweld.com?ref=timwelds
***Links to Gear***
(Some of these are affiliate links that cost you no extra, but provide a small commission from sales to support the making of these videos)
Welding Helment: amzn.to/2YAfdzD
TIG Welding Gloves: amzn.to/3fIc5rd
MIG/Stick Welding Gloves: usaweld.com/pr...
Kids Welding Gloves (my littles love to help): amzn.to/3Anm2m0
TIG Finger Heat Shield: weldmongerstor...
Welding Sleeves: amzn.to/3DqqMsx
Welding Jacket: amzn.to/3yAcV0H
***Subscribe***
www.youtube.co...
***Other Videos That You Might Like***
4 Types of Welding Explained: • 4 Types of Welding Exp...
Can You Get Electrocuted While Welding: • Can You Get Electrocut...
DIY Welding Fume Extractor: • DIY Welding Fume Extra...
Stick Welding Basics for Beginners: • Stick Welding Basics f...
Gasless Flux Cored Welding Basics for Beginners: • Gasless Flux Core Weld...
How to TIG Weld Aluminum: • Aluminum TIG Welding B...
***Affiliate Notice***
Some of the links on this page are affiliate links which provide a small commission from sales to help support this channel and make these videos possible. Thanks for your support!

Наука

Опубликовано:

30 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 138

@TimWelds 2 года назад

You can learn to weld. I'll show you exactly what to do in my affordable online welding courses at courses.timwelds.com.

@garylatture8948 3 года назад

Don’t have any aerosol cans on welding table. I had the piece I was welding slip and ground out against a WD 40 can and started a big fire.

@08Roadgl 3 года назад

Extremely comprehensive coverage and advice. Thanks Tim!

@TimWelds 3 года назад

Thanks so much!

@jibblehardicardi3827 2 года назад

Good advice. I took the more traditional route of waiting until I was about 40 then realising that my hearing was going, my eyes weren't so good, I had more scars than skin, and actually... I should probably use my safety gear more often. :-/

@thesteve0345 3 года назад

Lifting safety is huge, I love that you mention this! This is great stuff.

@grege2383 3 года назад

Chlorinated brake cleaner heated up = phosgene gas = hospital🏥 or dead!

@grege2383 3 года назад

The grinder you're using which has the On/Off switch is DEADLY! Sooner or later cutting metal IT WILL kick out of your hands. Had I been using the style you're holding - my femoral arterie would have been cut wide open! For metal working, the kind with the Dead Man switch is the only way to go! The dead man switch literally saved my life!

@PercyJackson93 Год назад

Do you say that because it got stuck in your clothes so it couldn't pull out or what happened? I imagine it still takes a fair time to stop

@foggynight Год назад

One time had a grinder jump out my hands and land in the gravel, was the on/off type but very luckily landed blade up, haven't used it without the perpendicular handle since lol.

@quoththeraven3985 3 месяца назад

My cousin slipped grinding pipe, the grinder caught his pants and quickly ran up his leg and.....he lost a testical. No joke

@FINfinFINfinFINfin 2 месяца назад

@@PercyJackson93 I was using a grinder to cut a brick on a wall about 12' up on a ladder. Grinder kicked and hit me in the chest, spun my shirt up and the grinder burned up. I got a heck of a cut and abrasion. Luckily, it was off to the side of my chest and not my sternum.

@cluebin8398 Месяц назад

@@quoththeraven3985 Holy crap, having a grinder rip off a testicle has got to be the worst shop injury story I've ever heard. Good thing he had a backup testicle.

@brianflanagan9476 3 года назад

Tim, great video. One topic I would love to see some detailed advice on is proper respirator cartridge selection/best practices based on the material you are working with (stainless, galvanized, aluminum, etc.)

@rpavlik1 3 года назад

👍👍 on the safety glasses. I had a wire wheel fling a hot wire piece at me, that got around my (un-tinted) face shield and burned my eyelid. Narrowly avoided a really bad time, even though it was just the wimpy Harbor Freight grinder even. So I won't be using a wire wheel without both goggles and face shield, and am planning to get prescription safety goggles after my next eye doctor appointment. I don't remember where I read it, but one of my new welding products said I should be waiting in the room for half an hour after welding to make sure there's no smoldering fire.

@cadebreaux5510 Год назад

yes!! I also remove any hoodie draw strings out my work jackets, was grinding and I looked away for one second ( because I heard the boss man yell my name for some reason) and the grinder wheel grabbed it and if it was not for my glasses the metal aglet would of probably destroyed my eye.

@MemeRider 6 месяцев назад

Hey, just wanted to share the Gospel that all men need, the Bible says all have sinned and fallen short of the glory of God (Romans 3:23) this means we all deserve death and separation from a perfect and holy God. But God did not leave us for dead, He sent His only begotten Son to die in yours and my place, so that anyone who believes in Him and repents of sin will be saved from separation from God, and have eternal life! I urge you please put your faith in Jesus Christ and follow Him, He promises to save all who cry out to Him and have a humble heart. We arent guaranteed another day so we must repent of sin and seek Him today while He may be found!

@michaelnewell9662 3 года назад

wear natural fiber & material clothing - most synthetics like nylon & polyester will melt and stick to your skin like napalm; also polyester fleece burns very easily. natural materials like cotton & leather may char, but they won't melt & are fire resistant. just look for 100% cotton, not poly/cotton or cotton/spandex mixes.

@TimWelds 3 года назад

Great tips! Thanks so much!

@Hobofish622 2 года назад

Good points made, great video. You have a natural teaching ability. Thanks!

@CraigHollabaugh 3 года назад

Please add to your safety equipment list an Aloe Vera plant, some Neosporin and Band-Aids.

@TimWelds 3 года назад

Thanks Craig! No matter how careful someone is, occasional small burns or cuts still happen.

@danl.4743 3 года назад

Thanks. That reminds me to buy the first aid kits that I always forget to buy.

@CraigHollabaugh 3 года назад

@@danl.4743 I seem to always get a little burn everytime I torch up.

@JarrenW83 3 года назад

Eye wash is a must as well!

@CraigHollabaugh 3 года назад

@@JarrenW83 adding this my buy list. Thanks.

@NickMango 2 года назад

Acetone rag on your welding table is bad news. I’ve set one on fire before. You don’t even know it till you lift up your hood. It doesn’t even need a spark. Your torch will light the fumes and boom it’ll just go up. If you’re doing a long weld or not taking off your hood for a while that thing will just keep going and you’ll never know it until it lights you on fire. I keep them in a metal bucket. And the canister closed and far away. Great video! 43 years old and I want to live a lot longer 🎉

@jakeegleston9810 3 года назад

Always use a safety squint

@TimWelds 3 года назад

Can't say I haven't done it...

@boatsandoutboards9070 2 года назад

You explained workshop safety very well. And a lot of things add to this list if you are at a construction site, specific to the site,where lots of different professionals work nearby. In case there is no HSE staff, you need to warn others on what to do or what to avoid while you are working. Also it is always good to have a backup fire extinguisher. I had 2 brand new extinguishers at a site, and one of those just didn't work when the when fire started and we had the use the second one. The pressure gauge was in the green area. There's no practical way to test this equipment before a fire begins.

@roul3688 3 месяца назад

Just bought a flux welder. Will touching the piece I’m working while welding electrocute me? I find it hard to steady/brace my hand without touching the piece I’m working on. If you couldn’t tell, I don’t know much about electricity or welding.

@Sparky-ww5re 3 месяца назад

While on the subject of fumes, although to the greatest extent possible the base metal & filler metal, if used, should be free from rust, paint, grease, etc. which may involve physical (grinding, wire brushing) or chemical means, some solvents have a tendency to react to the heat and UV light of the welding arc to produce phosgene, a very deadly nerve agent that was believed to have been responsible for the deaths of roughly 80,000 soldiers during WWI. While on the topic of fire safety and fire extinguishers, a shop that works on and/or stores magnesium, titanium and similar combustible metals should have a class D extinguisher in addition to the A-B-C type most of us are familiar with.

@colahyyrich3196 Год назад

nice video thanks...so I wish to ask what about tying my face?...cz the welding fumes irritates my skin and causes it to darken,crack and peal off

@noobinho8882 2 года назад

I had that super luck once🥴, just one little cut i had to do🧐, than you know what happened😵‍💫😵😭. Well am glad it was not that bad to cause damage to my eye🤗🤫😉, but it did teach me a lesson 🙂 next time wear your safety glasses 🤓😎🥸

@tyrotrainer765 2 месяца назад

My first time out with an angle grinder was about 2 years ago and the one I bought second hand had no guard. I was wearing thick gloves and was cutting old nails from some wood in the garden. My hand crept up the body of the grinder - I was totally focussed on a nail, and next thing the blade sliced through the glove and tore a gouge about 2 inches long in the side of my hand. I reckon another inch higher and I could have lost my index finger. Luckily it wasn't that deep but the scar took about a year to fade. Since then I NEVER use a grinder that does not have a guard AND a handle - and always safety glasses. It was a lucky accident because now I'm into woodwork and power tools - I'm paranoid about safety. I still reckon my most dangerous gadget is the angle grinder.

@gregsbox Год назад

Great video. I'm a total rookie and just bought a MIG. Should I avoid welding in my garage because it's finished in plywood or would I probably be ok using some common sense and keeping a fire extinguisher handy?

@bryanacree1607 Год назад

Great video sir. I do have a question, maybe you or someone else here can help me answer it, as I am learning to weld - just starting out. I have a project that i am working on at home currently. The project involves welding a small metal tab to the steel I beam girder in my basement. The actual connection should be fairly simple. However, I was wondering, is it possible for the electrical current to cause any problems in the rest of my house while welding? Assuming my ground clamp is close to the weld and assuming i have a good ground connection (no paint, metal is bright, shiny, clean, freshly grinded with angle grinder etc) is it possible to send a shock down the length of the I beam to somewhere else in the house? I wouldn't think this would happen with a good ground, but I am just a little paranoid i guess. My other question is, do i put the ground clamp on the I beam, or on the metal tab? I wouldn't think it would make a difference either way right? thank you in advance for the help!

@melgross 3 года назад

Very happy you did this, Tim. Too many people think they’re too manly for protective gear. I also use leather welding spats over my shoes. It’s amazing how junk gets into the shoe. Boots are better because they reach further up the pant leg.

@noobinho8882 2 года назад

I remember when i was afraid of welding spark, i run 🏃‍♂️ straight away left everything behind 🤣🤣🤣 i tell myself i will never be able to weld 😁😝😁

@unclederrick9666 3 года назад

Swing out jib crane to lift up to 1.5-2 tons can easily be made even at home. Pipe, angle and long 5x5 or larger I beam. Any winch can be mounted by bolts and weld as backup to trolley. Add the wiring harnesses and you got a job crane that will swing out with about a 7 to 10 foot reach. Cost is around $1000-1500 depending on metal sources. That includes winch for around 250-350. Once you know why you're doing its easy to make once you got the material.

@yurimodin7333 2 года назад

Harbor Freight engine hoist could be ok if you don't do alot of heavy stuff.

@R0ger007 11 месяцев назад

Guards on grinders are critical. Not just for flying debris. Took my guard off to access a tight spot. One slip and your holding hand could lose a lot of glove and finger skin.

@naboel8 2 года назад

12:10

@wilsonmatos6734 Год назад

I hate safety glasses. A lot of times they increase danger when they start to go up. After one of my first welds, I removed my face shield and hammered off some slag. Nothing like hot slag in your eye to make you buy some anti fog spray.

@Mike-ud5of 3 года назад

Thanks Tim, brushing up on safety is always time well spent. Nicely done vid as usual-concise and info-packed. I am trying very hard to be disciplined about always switching to my safety glasses when I walk into the shop-still, from time to time I have done just as you described “…just this one cut…” without safety glasses and have had a few near misses as a result. So clearly I have some room for improvement there 🙂.

@leftylattin 3 месяца назад

About a month ago i was welding on our stock trailer and when i lifted my mask i noticed there was a ton of smoke. Looked around and noticed i had lit the garbage can on fire near by 😅 no big deal, i got it put out but ive been much more vigilant on whats around when i start welding.

@blackbeton3923 2 года назад

Safety advices, especially in welding are always welcome, and I must say you make it very clear, and even if you don’t dig into small security details, you show in which way to dig if needed ! Really nice video 👍🏼👍🏿

@jamesofallthings3684 2 месяца назад

Always taste test your electrodes, but make sure you're grounded first.

@Brayden_-bd5sw 7 месяцев назад

i use airpods when im in shop works geart expcit that ger dirty and covred the case exscplucy with meatl l dust thougth i would share what i do love the vids keep it man

@carterhighfill622 2 года назад

sounds dumb but at 4:58 when u said air arc gouging. that’s the same as carbon arc gauging or different process ?

@danielchambers1958 3 года назад

Good stuff Tim….. disposable ear plugs are on my list👍✅

@TimWelds 3 года назад

Thanks Daniel! I always appreciate your comments!

@BobBlarneystone 2 года назад

Every safety rule is written in blood.

@floydwilcox2640 Год назад

You rock, I’m new to welding and plasma cutting and your videos have been very helpful. Thank you Tim 👍

@eletktrodragon7712 3 года назад

I learned to not leave Acetone rags near me while welding I was welding an aluminum panel since it spatters sometimes the rag caught on fire I three water on it did not work since I panicked a bit I just threw an aluminum plate on top and the fire was put out now I never do that

@TimWelds 3 года назад

It's crazy how easily they catch fire. Thanks so much for the comment!

@eletktrodragon7712 3 года назад

@@TimWelds yeah but I am a beginner to welding since the job I work at has mostly MIG welder rigs to weld beams and other materials

@douglasgallardojr4759 2 года назад

I'm very disappointed at how dismissive you are about respirators. You should always have a dust mask at a minimum, but welding requires a respirator. Your fume extractor isn't going to get those grinding dust particles, or 100% of the fumes. Please reconsider.

@hgaudgd 2 года назад

Useful information. Safety should always be priority number 1. Stop any work if it is unsafe.

@pentearmacaco 10 месяцев назад

Great video! Just what I needed as a newbie TIG welder (experienced with MIG). Unfortunately I've never gotten good ear protection from the little foam ones. Just a comment on rags: when they have acetone or mineral spirits on them, don't put them in the trash, unless it's a sealed metal container. Mineral spirits can spontaneously combust with the right mix of air. I let the rags air out outside first. A friend lost part of his house that way. I let the rags air out outside first.

@chrisdavis-mccoy6732 2 года назад

Dude, that acetone thing... I feel attacked... I forgot to take it off my table one of my first times welding and I'm really glad I saw the flames on my rag through my hood before the bottle exploded haha.

@Wendysnutzslide 3 года назад

Can you do a video on how to install an outlet for welding plugs.

@stefan3225 3 года назад

If you don’t know where the 4 wires go. hire a Pro

@TimWelds 3 года назад

Thanks so much for the suggestion!. I imagine that there are quite a few people more qualified than me who already have videos on installing 240 volt outlets. I'll take a look at what's out there and see if I may be able to add something.

@Wendysnutzslide 3 года назад

@@TimWelds ok thank you

@joe2479 7 месяцев назад

Excellent. Thanks!

@donschneider7252 3 года назад

Spray cans can be dangerous as well. I had a full can of spray grease fall off the shelf and hit the shop floor. The impact caused the nozzle to break off taking the valve with it and the can took off all over the shop area. Luckily it missed me and didn't hit any thing fragile. It sure hit my welding cart hard and sprayed grease all over; even the soda that I was drinking. Lots of pressure in some spray cans! lucky I was not welding at the time so no particular fire danger...

@unclederrick9666 3 года назад

If you use any aerosols keep them up. If you dye check(that white and red stuff you see people using) then keep it up. And if you use any surface cleaners as well. They make chemicals to clean contamination before you weld. Especially if it's stainless or aluminum. Some use alcohols or part cleaner but even if it's in a pump sprayer like windex bottle it still can blow since they are plastic and melt

@jimmywilson1388 Год назад

So I don’t have a fabrication table to clamp my ground clamp on to.. If I’m welding two pieces of metal together can you just clamp it on one piece of metal? I actually have the titanium flux 125 so the ground clamp is the positive, right? I’m confused… lol

@TimWelds Год назад

Yeah, you can just clamp it to the metal. You are correct that the work clamp will be connected to the positive pole for self shielded flux core, but you shouldn’t have to worry about polarity with that machine.

@jimmywilson1388 Год назад

@@TimWelds Ok thank you!

@douglasgallardojr4759 2 года назад

Miller makes a P100 low-profile respirator that works a charm. 35$ as of this message.

@Moonlightshadow-lq4fr Год назад

First time I ever heard anyone else mention how wire brushes on angle grinders or bench grinders can be dangerous. Highly left out safety precautions are made where they are concerned. I had a wire brush on a bench grinder fire a bristle out and stuck 3/4" into my lower leg! I can't even imagine how many accidents have been caused using wire brushes in angle grinders! Great informative video.

@randominternetviewer166 2 года назад

Exploding angle grinder cutting disk - had that happen on me. Just glad i kept the guard on and some eye protection. Always do

@vincentroddy2644 2 года назад

Hi there. Great work here Tim. Any suggestions for ventilation, how many SCFM I should plan for when building a fume extractor arrangement?

@steelmate4274 Год назад

Good work

@elkvis 3 года назад

Agree 100 percent on those diamond cutoff wheels. they're super slow.

@ranacherian 2 года назад

Do you have a recommendation for tig welding gloves?

@johnnydiorrr 2 года назад

Can you go blind from welding, even if you invest into a good helmet ? Like over time would you lose eyesight

@lorchapo8605 3 года назад

If I wear a half face respirator with p100 filters is it ok if I breath while the fumes are in my face? I can’t really get out of the way all the time

@tomkiehfuss Год назад

Thanks Tim! I am a complete nubie and want to be safe! Thanks for the sage advice.

@TriWich 3 года назад

Tim nice show. What is the name of the table you work on. We need one!!

@skdemars 2 года назад

Tim - Thanks for the vid. Only question I have and haven't seen anyone address is the fire extinguisher. Glad you mentioned your reason for having them near an exit, but what are the two different types? Is there an all in one that works for most shops? How does one determine the best for a home shop?

@geraldchambersmft2704 2 года назад

Just getting started really needed to watch this. Thank you.

@johnbonnier7598 Год назад

Another awesome video! Safety is so important.

@middleway1885 Год назад

Cheers!

@CaptainCalmer 2 года назад

Great points, safety is important, thank you for making this video, sir

@middleway1885 Год назад

Boop

@arjinlally1357 2 года назад

This is such a good video, I am just about to start getting into welding and was alittle worried about the dangers associated with it but after watching this videos and following all the tips, I feel alot more comfortable.

@brentpaulus4195 2 года назад

Thanks for a Saftey Brief. You might mention the proper way to turn on your gas valves, don't weld galvanized metal, and don't clean your work with Brake Cleaner which the fumes from welding it can be Fatal. I Love All of Your Videos. Keep it Up

@CatfishCody Год назад

"Dont weld galvanized metal without proper ppe" fixed it for ya

@tjf1531 3 года назад

Great content

@TimWelds 3 года назад

Thanks a ton!

@unclederrick9666 3 года назад

Also holes in your closes can cause an arc on your skin or mild shock if it's too close to the lead.

@g.tucker8682 2 года назад

Thanks for another great video! This info is more than valuable, it's critical. A few more points: 1. Never work when exhausted, sleepy, or in a hurry. Deadlines must be realistic. 2. Listen to that "little voice" in your head. That's your sense of self-preservation warning you not to do the stupid thing you're about to try. 3. Beware of confirmation bias. It's human nature to try a shortcut, and when we get away with it we're more likely to continue pushing the envelope. The risky behavior becomes the norm, and eventually luck runs out. I still carry scars from when I badly lacerated two fingers. All three of the factors above played a part in my mistake. Be smarter than I was, folks.

@leokelly359 3 года назад

so what you're saying is. that I shouldn't be welding wearing shorts, tank top and wearing sandals or even using my sunglasses for oxy cutting right?

@TimWelds 3 года назад

That's right. I've learned that the norm varies a lot in different circles, but I think it's best to play it safe.

@tlsmas007 3 года назад

Good video. Lots of great information. Thanks for making it.

@glennthomas4159 2 года назад

Lol. The first thing I am making is actually a trailer hitch. I am going to spend a fair amount of time practicing and making things out of similar thickness metal. Then on to making a new tongue for my teardrop camper. Your videos are great!

@foggynight Год назад

Really hope you live far from me!

@rjraworld7841 3 года назад

The jacket is otrer implement very important

@truckerray7533 3 года назад

Awesome! Thankya for sharing!

@varoescal 2 года назад

Nice video worth watching!

@Idioten_toten Год назад

Thanks I needed this 👍

@NoChannelChannel 2 года назад

Very comprehensive 👍👍

@gregruopp4437 3 года назад

10/10 thumbnail!

@bradthayer6782 3 года назад

Great and comprehensive video.

@victoroneill7924 Год назад

Great video!

@Thewatson77 3 года назад

Great refresher video Tim. 👍🏼

@flhs81 3 года назад

What do think about welders caps to protect head and hair from sparks?

@TimWelds 3 года назад

I have a couple of them, and they're really nice if you're doing a lot of overhead work. I'm usually doing bench work these days, so I don't bother with them unless I'm doing something where I'm getting sparks in my hair.

@evildead1791 2 года назад

Great video Tim

@jameswalter7565 2 года назад

Do you have any tips for dealing with attention to detail while working with an auto darkening helmet while arc welding? For instance with irregular gap welds (not straight) or with tight corners? For reference I used the chart provided and still had much difficulty actually seeing my work.

@AS-ug2vq 2 года назад

What kind of welding? Make sure battery is all charged. Secondly, I use bright led lamps only then I am able to see. I found my eyes cannot switch to darkness of autodarkening helmets that fast so I went back to always dark helmet along with led lamps to see clearly.

@jameswalter7565 2 года назад

@@AS-ug2vq stick welding exclusively

@jeremyleisy4553 3 года назад

Tim, what are your thoughts on actually grounding your welding table directly (beyond the ground clamp)?

@danl.4743 3 года назад

It's a common practice in shops around where I am...

@TimWelds 3 года назад

It's a good general practice. With a high quality machine, the welding circuit is completely isolated from the primary circuit, so grounding the table is more of a protection against a fault.

@edisonchinedu5221 3 года назад

I love this 🤗

@unclederrick9666 3 года назад

Watch where your self drops especially with cutting torch. Don't let it fall on gas hoses especially your oxy/acet hoses. But don't let it fall on cables. My work area I use to work on was a half inch steel plate on concrete. We could weld to the floor so any contact by cables can cause problems

@Fab2Mc 3 года назад

Super 🎉👍

@TimWelds 3 года назад

Thanks so much!

@DStein-jn9ls 3 года назад

All great reminders, Tim. Thank you!

@TimWelds 3 года назад

Thanks so much!

@stefan3225 3 года назад

I weld in Crocs 😎

@mickcollins2911 3 года назад

Dont the crocs get angry and move about? What about gators ?

@TimWelds 3 года назад

You could make them steel toed like the 'Stuff Made Here' channel. 😎

@slhasebroock 3 года назад

Where's the shade guide link?

@TimWelds 3 года назад

Oops, just added it. It's in this guide on page 15: www.lincolnelectric.com/assets/US/EN/literature/E205.pdf

@slhasebroock 3 года назад

Thank you!

@unclederrick9666 3 года назад

One thing I learned is what burns your eyes is not the brightness but the electromagnetic radiation. ANSI rated safety glasses stop the radiation. They don't need to be dark. Dark helps to see what you are doing. However if you are up close enough to any bright light, it can damage other parts of your eyes. But that welder burn which I like a sunburn is caused by radiation and if you are say 10 feet away or more then even clear safety glasses will prevent that sunburn.

@jameski5oeb668 3 года назад

Leather arms is what i purchased as a novice, not much more than fabric sleeves. I have safety glasses on always even under hood. Leather boots required. Hat is also a great idea!

@TimWelds 3 года назад

Great suggestions! Thanks a ton!