How To Bios Flash any NVIDIA GPU! (Unlimited Power) 

great tutorial, thank you!

Thanks so much!! Was able to reflash my 3090 FTW3 Ultra OC Bios to 500W XOC Hybrid after the EVGA exe failed

what is the best bios for evga 2070 i'm asking because i really don't want to brick this gpu?

Hey @ChamberTech i got a 3090ti from asus tuf, can i flash any bios on it from another card or how do you mean ?

Thanks for the steps man.

Hello, good video, i have a strange problem, i have tried around 10 bios and all of this work on my dell rtx 3070, but i have low performance because the power usage and temperature value are wrong and strange so it s always go in a power limitazion so the frequency are very low. They can be a solution for this or can be a problem to the gpu itself? Thanks for any can help

how to flash nv graphics cards with 2 bioses: perfomance and silent? how to explain to nvflash the chip of bios that i want to flash?

can u help me with my laptop gpu?..i cant find version

I cant find my gpu on the custom gpus :(

hey im trying to flash my vbios to increase my gpu power limit and as i follow your tutorial online im at the part where i look for my card bios on tech power up. however they dont have my vbios version, i have an rtx 3060 mobile with version 94.06.01.00.91 and they have a few above and below but not what i think im looking for, does it matter if I have the exact version? mabye im splitting hairs and getting too detail oriented but i only have one laptop and if i do this i want to do it right, any help is appreaciated thanks and merry Christmas!

thank you mate

rtx 2070 yes or no ?

discord link isnt working

Hello, could you please flash the BIOS of the MSI RTX 3080 Ti 12 GB VENTUS 3X OC with Core 1365, memory 1188 and a boost of 1695, with the BIOS of the MSI RTX 3080 Ti 12 GB Suprim X with Core 1365, memory 1188 and a boost of 1830?

When I tries to use nvflash flash a new vbios, I met a problem: Checking for matches between display adapter(s) and image(s)... Reading EEPROM (this operation may take up to 30 seconds) WARNING: Firmware image PCI Subsystem ID (17AA.3F8E) does not match adapter PCI Subsystem ID (17AA.3FFC). Nothing changed! Reading EEPROM (this operation may take up to 30 seconds) ERROR: PCI subsystem ID mismatch How to solve this?

Hi, can you tell me please, how can i reset my gpu bios? same way like in your video?

when I get to nvflash --protectoff . I get it is recognized as an internal command. What do I do

when i type nvflash --protectoff it says is not recognized as an internal or external command operable program or batch file. please help

board id mismatch

Cheers my 2080ti limit has been driving my nuts for years

good stuff

Helpful tutorial, just flashed a new one for my laptop 3070 (not a whole lot of vbios for it out there though)

this is good for your gpu run after with +200c bomb , its not good to you use ultimited power used Ultimited hot Gpu run , if you want your gpu hot +200c you use ultimited hot gpu but your gpu run hot

Dont flash your gpu for 3k series... unless you know what your really doing. Or youll brick your shit

WARNING GUYS! The methods are simple enough to understand and easy to apply BUT MAKE SURE TO BE SUPER SUPER CAREFUL as I almost lost my GPU I have an RTX 3060 12GB OC from MSI and it has three display ports (this will be important) and one HDMI port Now first off I tried a gpu vendor of EVGA as their card id would match mine and had decent spec description so I downloaded that rom file of the card and flashed it Here everything went smooth enough and it at the end after flashing was done told me to restart to make changes and so I did After restarting the pc I saw no gpu drivers were installed anymore so I thought ok that must be normal as I flashed the entire gpu itself and I installed the drivers and checked in gpu z that indeed it was a successful one and was showing EVGA instead of MSI but stupid me I forgot to check the power limits which was the main reason for me to flash in the first place! It was still same as my previous rom so I again downloaded another rom this time with higher power limits and this is where things went downhill a bit I followed same exact steps as before and everything went fine UNTIL while flashing in middle (where it shows the progress in cmd) it went till about 60% and boom by display went off and black screen. I waited and waited and panicked nad then finally held the power button of my pc and tried restarting it. But it won't give me any display and on the motherboard I could see a clear red sign under the gpu segment and that is when I started to freak out thinking that the gpu is done I thought and was sure I bricked it.. I searched for solutions after solutions and finally just before giving up to utter dismay I had a brilliant idea of switching the display port (was using 2nd one so switched to first one and tried) and then had a huge relief when while again booting up I saw no more red light on motherboard and vallah my pc booted AND IMPORTANTLY WITH THE CORRECT ROM THAT I THOUGHT HAD JUST FAILED! Also it had already pre-installed graphics drivers (maybe windows did it?) But I immediately fired up GPU z and saw that indeed this time it's showing the vendor to be ASUS (as 2nd time I had downloaded that) and all the specs were correct.... BUT then I thought to myself that why wouldn't it boot earlier and show me red sign.. then I switched back to the display port 2 and same thing the monitor would stay black although no red lights on motherboard and then I again switched to port 3 this time and fine the display immediately cranked up bright and then again back to port 1 and still fine but again when port 2 nope no more display So BASICALLY my display port 2 on the gpu is done for and it's useless now Just be careful guys to not overdo and ABSOLUTELY make sure to download right one AT ONCE don't make my mistake and stuffer your gpu for that I was lucky only display port got damaged and not the entire gpu itself...

tokatı yersin

dont think you should be making videos like this if you dont bother taking out the parts where youre messing up and making mistakes

windows 11

again anything over 240FPS cant be seen by humans. just GOOGLE IT

Hi @ChamberTech I have a 3080ti that have power restrictions and I would like to know what do you recommend me to flash it with I would like the maximum amount of power I could get and you could give me more than one option