How to blend with not much room

Подписаться 39 тыс.

Просмотров 75 тыс.

50% 1

IF YOU GET ANYTHING FROM MY VIDEOS PLEASE BUY SOME HOODIES,T-SHIRTS AND MORE HERE! www.motivatedpainters.com
Watch some white pearl tips here!
• White Pearls & MORE! m... subscribe to my VLOG CHANNEL!
/ @gabrielmerinovlogs1802
WATCH ME PAINT MY FIRST BMW I8 PAINT JOB
WATERBASED TWO TONE"
• BMW I8 PAINT JOB
WAT...
~-~~-~~~-~~-~
*** I APOLOGIZE FOR THE BAD AUDIO! I'VE BEEN EXPERIMENTING ON WAYS TO GET MORE VIDEOS OUT TO YOU!
IF YOU TYPE IN THIS HASHTAG #motivatedpainters on youtube you will be able to see ALL MY VIDEOS!! CHANCES ARE YOU HAVEN'T SEEN THEM ALL AND I KNOW THAT YOU WILL GET TONS OF VALUE FROM LOOKING THROUGH THEM!
IF YOU ARE NOT FOLLOWING ME ON INSTAGRAM YOU ARE MISSING OUT!!!! JOIN ME ON INSTAGRAM: / motivatedpainters
JOIN ME ON LINKEDIN: www.linkedin.com/today/author...
MOTIVATED PAINTERS AS IS WOULDN'T BE POSSIBLE WITHOUT www.buddscollision.com which is where I have worked for a decade now!
SUBSCRIBE TO MY RU-vid CHANNEL: ru-vid.com/show-motiv...
ADD ME ON SNAPCHT: gabriel.merino / gabriel.merino
JOIN ME ON TWITTER: gabrielmerino90?l...
Camera 1 : amzn.to/2swsgfQ
Camera 2 : amzn.to/2utWcdX

Авто/Мото

Опубликовано:

31 дек 2016

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 164

@rauly.delcastillo7054 5 лет назад

there is nothing wrong of asking we are all refinishers. this guy is great lets give him a big hand.

@casperkalf1976 3 года назад

with difficult colors i usually spray 1 control coat then 1 control coat with 200% water added to the paint and 1 control coat with 300% water. this also helps prevent edges

@nicksandoval4618 6 лет назад

Nice job Buddy 👍🏾if you tell the writers you need 20 inches for blends they give you 15 if you say you need 12 the give you 6 always a struggle. Nice to see your videos your a Great Painter

@MrBluntash 5 лет назад

New favorite channel .. good Shit man!!

@dimitridam1249 7 лет назад

Nice work..learning how to do blend.. Its one of the most dificult jobs..greatings from spain.keep going.

@MOTIVATEDPAINTERS 7 лет назад

+Dimitri Dam thank you my friend 😀😀😀😀

@robertelee6712 Год назад

I don't care what you do, a blend is always noticable. I guess for a daily grocery getter this look better than a dent.

@jamesholiskey7431 7 лет назад

I have been trying to do body work and painting and I'm struggling. Your videos are awesome. thank you for the hard work and for sharing the important details.

@MOTIVATEDPAINTERS 7 лет назад

+James Holiskey keep it up man!! Don't give up two feet from gold!!!!

@stanonishi5101 7 лет назад

Awesome video, I like that you explain what and how you do your jobs.

@MOTIVATEDPAINTERS 7 лет назад

+stan onishi thank you so much!!!!! 😁😁😀😊😀😊

@majstorovicdj 7 лет назад

Wery good video with simply explanation...,great.

@josephsanchez6188 6 лет назад

awesome i learn a lot from your videos thanks gabi

@MOTIVATEDPAINTERS 6 лет назад

Thanks so much !!!

@brucecontreras5712 5 лет назад

I would have masked up front door edge for the first cover coats on primer, then pulled off masking paper on the last control coat or 2. Helps me with my sand piling.. great job as always man. Ive learned a ton from you. Gracias!

@MOTIVATEDPAINTERS 5 лет назад

Absolutely a great way to do it! Thanks brother !

@jonathanmcleod5121 Год назад

Looks great

@lildevildog8163 5 лет назад

I have the teckna pro lite vigilante and love it

@Bluestouse86 6 лет назад

Your booth is so amazing. Gah. Someday

@TheRealSirPreame 5 лет назад

Learned something I always have a hard time with when clearing big panels. One foot over the other fixes that. Thanks a lot.

@MOTIVATEDPAINTERS 5 лет назад

Glad I can help !!!🙂

@hayeslorenzo8624 2 года назад

Instablaster.

@ANDY-we7mr 2 года назад

nice job gabriel the WS400 and LS 400 if your learning to paint what gun would you go for

@NormBrennan 18 дней назад

Good work on the Meme that was fun to watch thx guys

@Edinxg 7 лет назад

Hi friend! good job man,and nice commentary👍

@MOTIVATEDPAINTERS 7 лет назад

+My Favorit Channel. Thank you!!!!!!! 😁😁😀😀😀😀😀

@eviljoker303 4 года назад

I do my drop coat while the surface is still wet ,but increase the distance a bit .Thats always worked for me but I always use wet bed

@peterraco9193 7 лет назад

nice blend bro so releasing the trigger when blending is go might have to try

@MOTIVATEDPAINTERS 7 лет назад

+Peter Raco 😁😁

@minghuichen9481 3 года назад

Very good job my friend

@MOTIVATEDPAINTERS 3 года назад

Thanks!

@pitlion1 7 лет назад

Great job as always! You would'nt happen to have the Iwata LPH400 LVX Extreme gun with orange cap by chance? Wanting to see some suggested gun settings for that gun.

@MOTIVATEDPAINTERS 7 лет назад

+pitlion1 thanks you!! No I don't!!

@JaimeRodriguez-pg3zs 7 лет назад

nice job bro👍

@MOTIVATEDPAINTERS 7 лет назад

+Jaime Rodriguez thanks bro!!!!

@mrmuskey5202 6 лет назад

With Axalta and 1 1/2 coats your able to blend in a very tight area. The system is the easiest to blend bye far….just saying. Sand-piling creates mottlle, and it can be tough to deal with times . With a true waterborne, there is no over spray or sand-piling. For example- because its a wet on wet process you could spray a black complete then tack with a new tack rag before clear and there won’t be any sign of black on the tack rag cause any overspray lands into the wet film and is absorbed. It ends up being silky smooth before clear. It was good that you eliminates to many blend area buy spraying to the top and bottom of the door. We should never attempt to blend in a circle if we can help it.

@robertbanger495 3 года назад

Good work. Only issue could arise is you spraying the covered window area with the overspray on plastic . It could flake off

@MrBluntash 4 года назад

such a beast....

@dougowens2686 4 года назад

Awesome job you need to list you equipment were can i get one of those blowers

@MOTIVATEDPAINTERS 4 года назад

Thank youuuu!!!! Motivatedpainters.com

@PHARRAWAY 7 лет назад

NICE

@MOTIVATEDPAINTERS 7 лет назад

+pharraway 😁

@haykorodriguez6701 7 лет назад

nice job

@MOTIVATEDPAINTERS 7 лет назад

+HAYKO RODRIGUEZ thanks!!!!

@Ldavidable 11 месяцев назад

what's the brAND OF THE WET BED YOU USE?

@migueltorres6707 6 лет назад

thank you im ready to do miracles

@MOTIVATEDPAINTERS 6 лет назад

😂🤣😂🤣😂🤣😂

@alexandrefire1188 4 года назад

What kind or brand of cleaner do you use post sanding ? I use solvent base on my bike frames jobs. Please let me know. Thx

@MOTIVATEDPAINTERS 4 года назад

Same prime wash

@sprayworks9592 7 лет назад

looks good man 👍 what do you use to edit your videos?

@MOTIVATEDPAINTERS 7 лет назад

+Spray Works thanks! You ready?!! Windows movie maker 😂

@hamzakarim3984 7 лет назад

nice

@orielcollins414 5 лет назад

Question: Do you need to scotchbrite or buff the entire panels original clearcoat before laying down the final clearcoat on top of the repair? OR is it possible to lay down an epoxy primer patch, then patch with the base color, then just put the final clearcoat over the entire panel without scuffing the whole area for adhesion of the final clearcoat?

@MOTIVATEDPAINTERS 5 лет назад

Everything has to be sanded always

@orielcollins414 5 лет назад

MOTIVATED PAINTERS That’s what I had learned but I don’t think some of these other tutorials understand that. Appreciate you. 🙏

@ErickHernandez-zd3nk 3 года назад

So did u use the paint for the car or did u use a paint similar to the paint for the car to cover the primer

@MOTIVATEDPAINTERS 3 года назад

The actual paint

@rauly.delcastillo7054 5 лет назад

thats what im doing as a sprayer. i save penny on my paint job.

@rauly.delcastillo7054 5 лет назад

helping others is one of the greatest thing in refinishing basecoat clear coat system. but how about polyurethane paint blending? the basecoat is added with hardener means paint is wet quite longer. using tackcloth is the issue?

@MOTIVATEDPAINTERS 5 лет назад

Never done it brother we don't us that

@konstantintop-painting6882 7 лет назад

happy new year my friend !remember all the spray guns blending by his self !tell me please how is your german spay both ?

@MOTIVATEDPAINTERS 7 лет назад

+Konstantin Top- painting Happy New Year!! Thank you!! German booth is great!!

@konstantintop-painting6882 7 лет назад

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

@robertspicer3716 6 лет назад

why not use a smaller gun and work tighter patterns? I'd rather push a smaller air cap and leave room to work. Does that make sense? sometimes I use a jamb gun for blending metallics.

@garrettstokes2860 7 лет назад

do always clear top to bottom on a down draft booth? I'm just the opposite because I was taught that all my over spray will melt in because I always have a wet bed. also not fighting texture. also what grit to do prep your blend panels? I finish mind with 1000 on metallic colors and 800 on solid colors

@MOTIVATEDPAINTERS 7 лет назад

+garrett stokes I alternate most of the time I clear bottom to top but sometimes top to bottom if your clear is not melting into itself then maybe the clear is to fastwe use 1000 for light colors 😀 thanks for the support!!

@garrettstokes2860 7 лет назад

do you use t492 and t494 in your base coat? 10% 492 and 20% of 494.

@MOTIVATEDPAINTERS 7 лет назад

+garrett stokes not for metalics

@backyardkulay700 5 лет назад

hi gabe great video. quick question. no need to use blender on it? thanks and god bless

@MOTIVATEDPAINTERS 5 лет назад

Nope if you can tack and keep your gun control controled lol but if you need to then it's okay too

@ahmedgamal3 3 года назад

Good

@Val-mm5gd 7 лет назад

I would use a tighter overlap for both your base and clear but nice job looks good on camera

@MOTIVATEDPAINTERS 7 лет назад

+Valer Vitak isn't it awesome that we can have so many different techniques and still get awesome paint jobs?!

@Val-mm5gd 7 лет назад

MOTIVATED PAINTERS, you will never find two painters that are exactly the same.

@MOTIVATEDPAINTERS 7 лет назад

+Valer Vitak you are so right! 💪

@772777777777777 7 лет назад

You should make a video for diyers showing how to make multiple sprayout cards to aide in blending.. ie most diyers don't have access to tinting bank and adjusting there paint they purchased...ie the variant they choose was the best option but is still off .ie to dark. Please show how multiple spray out cards with multiple coats of basecoat clear blender .. Can help adjust colour matching along with spraying psi which can light or darken a colour. Along with blending tips during painting. The goal is to lighten a basecoat varriant using a base cost blender etc, along with blending techniques and drop coats etc.

@robertbanger495 3 года назад

Like how u work. What's the name of gun using ?

@MOTIVATEDPAINTERS 3 года назад

This one was tekna basecoat I believe it's old

@MrSecyrb13 4 года назад

Damn how warm is your booth to wipe wax and grease so quick grant it live in Minnesota

@MOTIVATEDPAINTERS 4 года назад

Usually have it at 80 degrees

@Sprayedbydre 6 лет назад

That's badass, you have a lift in the booth?

@MOTIVATEDPAINTERS 6 лет назад

I am so freaking grateful man yes I do !!!!

@hamzakarim3984 7 лет назад

wow

@JuanMartinez-kd3jm 4 года назад

How did you prep the panels so you don't need a wet bed.what grit of sand paper did you use

@MOTIVATEDPAINTERS 4 года назад

800-1000 if they are silver or gold

@JuanMartinez-kd3jm 4 года назад

Ok thanks

@richardrodriguez367 5 лет назад

What kind of pump sprayer do you use??

@MOTIVATEDPAINTERS 5 лет назад

Same as the colas ones

@DrumslineMoreno 4 года назад

What kind of gun r u using?

@alaneandreh2370 5 лет назад

One question please if u put sealer on the primer and dry it then u put base coat and clear coat u think the primer soak up base coat and clear ? After some days ??????? Because some time the finisher cuts the edge or cut the primer and see the filler so he put canes 1k primer so how to fix like that’s problem ??? Thanks for your reply 🙏🏻🙏🏻

@MOTIVATEDPAINTERS 5 лет назад

Yes that would fix the problem

@alaneandreh2370 5 лет назад

Thanks for your reply but after two weeks becomes like dieback

@jlvcollisionrepair2229 7 лет назад

Nice blend mi friend , try reverse blend is the great efficiency

@MOTIVATEDPAINTERS 7 лет назад

+jlv collision repair I have yet to learn how to reverse blend!!!

@jlvcollisionrepair2229 7 лет назад

MOTIVATED PAINTERS I do not know how to explain to you so that you can understand me but you can search my fb

@jorgeluisporto1052 7 лет назад

parabens! qual o nome desta ferramenta utilizada para soprar a poeira da tinta? gostaria de comprar uma!

@MOTIVATEDPAINTERS 7 лет назад

+Jorge Luis Porto I'm not sure where you are from but you should be able to ask your paint rep for a blower 😀 thanks for the support!!

@smoothoperator5349 6 лет назад

Brasil

@brandontashiro862 6 лет назад

Idk if this has ever been asked before but what started the whole blower routine what made you choose that style how did you end up choosing your first blower did someone show you that trick or you saw it and said hey I think I could make use out of it

@MOTIVATEDPAINTERS 6 лет назад

+Brandon Tashiro I just wanted to make the base dry faster and when we switched to ppg they brought the blowers so then I started using them. They are affordable unlike the sata ones that are just crazy in Prize

@brandontashiro862 6 лет назад

MOTIVATED PAINTERS I wish getting different color ones was easier took me a long time to get a blue one

@MOTIVATEDPAINTERS 6 лет назад

+Brandon Tashiro yeah man!!

@southisaac 5 лет назад

What brand tack cloths do you use?

@MOTIVATEDPAINTERS 5 лет назад

Colad ones

@MrCbell57 3 года назад

I've got a color that matches spot on, but a sanded through spot near the front of the door. I can just paint the entire door. But I have a second place sanded through and discolored that needs to be resprayed on the quarter behind this door. I can spray the base to lightly bring the color back to normal. But how do I get the clear coat to blend with the existing clear? Do I use a chemical within the clear? If I clear the entire area I would have to paint half the car due to it being a fast back mustang. I want to blend the paint, and then blend the clear. Or does clear need to be blended? If I over lap other clear won't it sand down with 1500, then 3000, then would it leave a line or area that does not clean up and buff or polish properly?

@MOTIVATEDPAINTERS 3 года назад

I don't recommend you blend the clear. Just base where you need to and clear the rest

@MrCbell57 3 года назад

@@MOTIVATEDPAINTERS so re clear the entire rear of car? Again? Both quarters and the tail and the top of car? For a two inch rebase shoot?

@MOTIVATEDPAINTERS 3 года назад

Wherever you will base. That panel needs to be cleared. That is the right way to do it for it to last

@MrCbell57 3 года назад

@@MOTIVATEDPAINTERS Yes I know to clear over any base. If you spray base over an area the size of a door latch. Do you need to clear the entire door? Or if you have that same area on the quarter panel...do you need to clear the entire back half of car, top, both quarters, tail panel and so on? Or can you blend the clear? So, Okay the base will go on about 6 square inches of the quarter. The same for the door area. I don't mind clearing the entire door again. But having to clear half the car to repair a small area I reshoot on quarter panel, that needs two light coats of base and is a 6 inch square area seems crazy Especially since I see you actually doing it on a small area yourself. What your doing is what I want to be able to do. Not clear the biggest part of the car for a little base touch up area. If I shoot clear over clear, will it show Dull areas where I stop? Or will sanding it and buffing it make it look fine? Yes I know it needs to be cleared. Maybe I can send you a pic of it. Are you on facebook? Thank you.

@MOTIVATEDPAINTERS 3 года назад

If you base even a quarter size spot on a panel you need to clear the rest of the panel

@nailler1 4 года назад

Where does the overspray go in the door handle openings?

@MOTIVATEDPAINTERS 4 года назад

Not much goes in there it desipates inside of the door. Is much better to cover them with some foam tape though

@nailler1 4 года назад

@@MOTIVATEDPAINTERS Thats what should have been done in the first place. Otherwise the overspray covers the window. Also allows contaminants to blow back out on the painted surface

@alexgonzalez7395 3 года назад

Did you sand the whole section?

@MOTIVATEDPAINTERS 3 года назад

Yup

@johnolsson3997 5 лет назад

You don't use color blender with waterborne?

@MOTIVATEDPAINTERS 5 лет назад

Nope don't need it unless is supper hot and dry

@johnolsson3997 5 лет назад

@@MOTIVATEDPAINTERS oh, just wondering because never used waterborne before

@M6teenbam323 7 лет назад

What gun do you use ? I need help finding a gun that won't break the bank. I'm gonna be painting on 21 floors. Also what's that pressure reader?

@MOTIVATEDPAINTERS 7 лет назад

+M6teenbam323 it really all depends on what product you will be shooting. Tells prolites are great guns for whatever you throw at them

@leesanders6490 7 лет назад

Gun snobs usually can't paint with anything less than the best and most expensive. Even then it's a crap shoot.

@Bluestouse86 6 лет назад

Tekna GTI prolite. You can’t go wrong. Very versatile gun. Runs about $350 usd

@Brulserz 7 лет назад

"Swing your leg infront and across..." I suppose that it is a stupid question, but what do you mean by that? I just cant imagine it, so that is why i am asking. Thank you.

@MOTIVATEDPAINTERS 7 лет назад

+Brulserz the whole point of that is to not stopping while you are spraying if you take a step and stop and your finger still on the trigger you are going to screw something up but if you swing your leg across in front of the other and try to keep your body moving while spraying instead of step and stop. Hope that makes sense probably now but that's the best I can do in text hahahahah

@Brulserz 7 лет назад

That makes sense :D Thanks!

@MOTIVATEDPAINTERS 7 лет назад

+Brulserz okay awesome!! 😀

@rauly.delcastillo7054 5 лет назад

no need wet bead , base clear just plain basecoat then clearcoat. and shoot the panel. only few can do it right.

@MOTIVATEDPAINTERS 5 лет назад

Yes it can do that

@MrGilbertlorona 7 лет назад

on your blower is that a regulator?

@MOTIVATEDPAINTERS 7 лет назад

+Gilbert Lorona yes sir!

@MrGilbertlorona 7 лет назад

MOTIVATED PAINTERS who makes it and part number i need something like that

@MOTIVATEDPAINTERS 7 лет назад

+Gilbert Lorona yes sir! Right away! You can buy it on princessauto.com I don't know any part number for the regulator.

@nayanhernandez1566 5 лет назад

I use PPG EC530 and sometimes EC520 clear. how long would you recommend waiting between my first and second coats?

@MOTIVATEDPAINTERS 5 лет назад

For ec530 no longer than 10 minutes and no less than 7 for ec520 no more than 5 no less than 3

@nayanhernandez1566 5 лет назад

Thanks!!!

@exsicario 4 года назад

What is control coat?

@MOTIVATEDPAINTERS 4 года назад

Last coat before clear

@JBIRD575 6 лет назад

Do you buff at all???

@MOTIVATEDPAINTERS 6 лет назад

+JBIRD575 yes everyday 😊

@majstorovicdj 7 лет назад

Do you use somethimes blending aditive?

@MOTIVATEDPAINTERS 7 лет назад

+Majstorovic hello thanks for the kind words! No I don't

@majstorovicdj 7 лет назад

Thank,s ..forget to asking how much pressure use for this job...?

@MOTIVATEDPAINTERS 7 лет назад

+Majstorovic 18 base 15 control coat 30 clear PSI

@majstorovicdj 7 лет назад

Ok it is about .1bar for base .I thought so. If you would like to use more pressure for the base layer not be good,thank,s again for patience.

@MOTIVATEDPAINTERS 7 лет назад

+Majstorovic for this gun " tekna base coat "" this is the set up.

@vamengxiong7619 2 года назад

To stop sand piling use base coat blender with a wet bed. Thank me later

@zcenic05 7 лет назад

I still see your blend. Tough color.

@MOTIVATEDPAINTERS 7 лет назад

+Cel Pinal can't get them perfect every time!! 😀 thanks for the feedback

@mk1eski 5 лет назад

Once cleared you cant not see anything great job and that is a hard color to blend

@cynt1111 2 года назад

fuck me i paint in an old dusty garage with a binks 222 and paint brand new cars.

@chuckthomas1913 7 лет назад

"How to blend with not much room" Pro tip: If you don't have much room you can still take the job outside! hahaha! Ok, not funny... :/

@rauly.delcastillo7054 5 лет назад

its very easy for a long time sprayer again very easy.

@brunoburtoni8479 5 лет назад

wtf is a wet bed?

@jasoncain1063 4 года назад

bruno burtoni it’s a clear base coat used on blend panels. It’s makes blending metallic and pearl paints so much easier.