HOW TO: BMW E46 HID to LED headlight conversion 

I left the hi beams at the factory angle, I think the reflector is designed to work best at that angle. I have an intense hotspot higher in the center to see further down the road, as opposed to what you show in this video.

Can you give some help? Are you able to give a link to a similar product that might be available? I'm having difficulty finding the right options. Your help would be HIGHLY appreciated!

Can I wire a low beam bulb to high beam wiring and still have the low beam on when the high beams are off, or will the low beams be off with the highs ? Idk if it makes sense

I have a e39 with h7 low and high beam factory, bought an aftermarket depot headlight that is for xenons d2s... Is it possible to install led d2s?

Great video! What brand and model are the Led bulbs in the fog lights?

How do I make my xenon projector shutter work if I swap HID for LED and delete ballast

Did you install the DZG D2S 35 or 80 watt LED bulbs? Stock is 35w I believe. If the 80 watt, how is the heat?? I want the lumens of 10000 LUX over the 8400 LUX but not at a fire risk.

Ive purchased the new d2s led to hid (plug and play) but only works in one side of the car..on other it lights up but after 1sec it shut off.. Do you have any opinion or solution on this? Thanks

What kit have you used ?

Hey, I want to swap my whole lense out for an aftermarket set. Would I just need to do the resistor?

Your projectors don't do high and low beam though

So if I wanted to convert just the factory xenon I would need that single bulb right? Not the resistor?

How did you connect the D2S LED to the cars 12v source bypassing the ballast? Video shows you removing the ballast, then fixing your H7 bulbs. But nothing about the D2S LEDs :-( i have same issue with my Mini, want D2S LED, but unsure about the ballast

Is it possible to buy the Osram LED for the High Beam or should i buy only simple LED without balast for Highbeam?

Is there an alternative resistor you would recommend so it won't over heat?

I did the same thing on my 330i but the angel eyes still flicker occasionally, pisses me off.

Thank you for you help but I steel don’t understand where to connect those 2 wires. Thank you.

You video was good but you didn’t explain or how how to connect the 12 for low beams, 12 volts wire it will go straight to battery? Thank you.

Dónde estas ubicado y Cuanto cobras por hacer ese mismo trabajo

does it pass inspection with these lights?

You brought the wrong conversion kit. You should've gotten the High Intensity LED (HiLED). They plug directly into the factory ballast. No splicing, none of that extra crap you did. Not going to advertise brand as theres like 2-3 companies that do it and seems to be new technology. See below Upgrade high power 90W D3S D3R LED light bulb for HID original bulbs replacement. ▶Operating Voltage: 45V Pay attention: Please never install D1S D1R led bulbs to D3S D3R ballasts, and never install D3S D3R led bulbs to D1S D1R HID ballasts, it will cause HID ballast burnt out. D1/D1S/D1R ≠ D3/D3S/D3R ▶10 minutes directly install to the ORIGINAL BALLAST to replace HID headlight bulb.No need to take off the original ballast.(Please make sure the function of the ballasts are working) ▶100% super decoding error-free.

Well that's not entirely true infact it's not true at all.The new Osram Premium cool blue intense HID are brighter and superior to any led out there

Another lighting comparison video with the phone camera's ISO set to auto 🙄

Hey daddy