How to Bore Holes for Deadbolt, Doorknob and Latch Install | Metal or Wood Door

Подписаться 526 тыс.

Просмотров 73 тыс.

50% 1

In this video, I cut a door knob hole in a steel door for a new deadbolt. This hole cutting method can work both for metal and wood doors. Having a door knob installation kit does make it a lot easier but you could do it without.
Join this channel to get access to behind the scenes videos:
/ @thefixerhomerepair
• Subscribe on RU-vid: bit.ly/SubscribeToTheFixer
• Second Channel: / @thefixerhomerepair2
• Facebook: / thefixeronyoutube
• Instagram: / thefixeryoutube
• TikTok: / thefixeronyoutube
• Website: www.thefixerhomerepair.com
• Patreon: / thefixer
• Amazon store: www.amazon.com/shop/thefixer
*As an Amazon affiliate, I earn commission on qualifying purchases.
Door Knob Installation kit- amzn.to/3PI9i2H
Kwikset Combo Set- amzn.to/3LMgGZw
Chisel set- amzn.to/48ywSHL
Screwdriver combo- amzn.to/45ik3hT
Utility knife- amzn.to/3LxaHYt
Hammer- amzn.to/3LmYzcu
Door Hinge Screws- amzn.to/3RLucRc
Drill, Battery & Charger- amzn.to/3tfoixj
Household Tool kit set- amzn.to/3rjGULW
(Affiliate Links)
DISCLAIMER:
This video and description contains affiliate links, which means that if you click on one of the product links and make a purchase, I will receive a small commission at no extra cost to you. This helps support this channel and allows me to continue to make videos like this. Thank you for your support!
Videos produced by The Fixer are provided for informational purposes only. All material provided within this video is for informational, educational, & entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. Please use all safety precautions while following any instructions or concepts provided by this video. Viewers must be aware that by doing projects on their homes they are doing it at their own risk and The Fixer cannot be held liable if they cause any damage to their homes. It is the sole responsibility of the viewer to educate themselves on their local codes and regulations before undertaking any sort of project. Always have safety in mind and have fun!

Хобби

Опубликовано:

11 окт 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 99

@TheFixerHomeRepair 8 месяцев назад

Subscribe to my channel: bit.ly/SubscribeToTheFixer Thanks for watching! 😃

@vknglion 8 месяцев назад

Really enjoy your video's. I really like the fact that you show your mistakes and what not to do when installing something. I'm the guy that makes those mistakes, so it really helps me to avoid doing them. Great job. Take care.

@TheFixerHomeRepair 8 месяцев назад

Thanks for watching!

@DaneSaysStuff 8 месяцев назад

Dude your channel is a wealth of relevant info. Old house problems and knowing how to solve them realistically is priceless. Much better than these channels that are like "The floor is little uneven so we demolished the entire house and are building a new one from scratch, you can do it on a budget also!"

@charlesmcadory8286 8 месяцев назад

Another way of finding the strike plate location is to use AC foil tape. Place it on the jam and use the deadbolt to make an indentation.

@JaySmith-rv4ro Месяц назад

Thanks. Never thought of that. Putting one in today

@timothysebo-glenn864 8 месяцев назад

I like how you cover every step in different ways. I am beginner in some things and more advanced in others. And now I can count at least 4 times in the last month I’ve referred to your videos to learn how to do things. Thanks for the great content.

@TheFixerHomeRepair 8 месяцев назад

Glad to hear that the videos are helping, thanks for watching! 😁

@b5maddog 8 месяцев назад

Thank you so much! I now feel more confident in doing this project. Thanks also for your honesty.

@lancelavallee8487 8 месяцев назад

Couple of Pro tips. When using a hole saw and paddle bit. Use an impact driver. This will save your wrists. When the bits meet the material, the impact driver will ratchet when it contacts the material. With the hole saw. Drill in and stop just before the core reaches the material. Put drill in reverse. Drill till the material is etched. Then put drill in forward. This will give a much cleaner hole.

@garypoplin4599 Месяц назад

I would also run the drill at a much lower speed on the metal part than he did here.

@archiehenderson2744 8 месяцев назад

Thanks for the demonstration. Slow and patience’s help a lot. Thanks again.

@butterfliesandcamo5975 8 месяцев назад

This is the first notification that I have received from your channel in months. I now see that I have a lot of catching up to do...YIKES😱

@TheFixerHomeRepair 8 месяцев назад

Welcome back! 😁

@butterfliesandcamo5975 8 месяцев назад

@@TheFixerHomeRepair Ya, no kidding🤣 Thank You☺️

@jsaysyay 8 месяцев назад

as other comments said, i do appreciate the showing of how to do things with less tools, nice vid as always

@T.E.P.. 8 месяцев назад

always thorough and enjoyable and educational ... your house is gonna be famous when you finish it.

@TheFixerHomeRepair 8 месяцев назад

Thanks for the continuous support, I appreciate it! 😃

@henrysboy2 8 месяцев назад

Made my day with this video. I now have a Saturday morning project. Thank you

@michaelmathews295 8 месяцев назад

There's a Kwikset tool that you can probably find online for a few bucks. You take the knob off and stick this down the hole where the rod that connects the two knobs together. The tool also helps you remove the rod. You stick it down the hole and it will release the springclips that hold the key cylinder in and you just flip it around. I did thousands of rekeys when I worked at Home Depot.

@Narrow-Path. 3 месяца назад

Well, your video helped this 62 year old woman to install a deadbolt on her steel front door. It took me forever and back and forth to Home Depot a couple times, but it's installed! Thanks for your help. Sure appreciate it 😅

@TheFixerHomeRepair 3 месяца назад

Awesome to hear! Happy to help!

@mikewhittle3683 8 месяцев назад

The lock pins should always be at the top so that dust and dirt don't cause a "sticky" lock-set eventually. You installed the deadbolt correctly, but the doorknob lock is upside down. You can get your hardware store or home center to reverse the lock cylinder so that the pins are on top and the keys to the doorknob and deadbolt face the same way.

@mikewhittle3683 8 месяцев назад

While you're at it, you can have the home center key the two locks to the same pin configuration as long as both the deadbolt and doorknob lock are from the same manufacturer. I have one key that functions with all the locks in my house - 13 locks/deadbolts total.

@jshawycp Месяц назад

Nice work! Thanks for pointing out the potential mistakes - BEFORE - I make them!

@michaelwright3709 3 месяца назад

You saved me so much trouble. The old door frame was pretty messed and you helped me get what I needed done quick and easy. Thank you a bunch for making this video.

@TheFixerHomeRepair 3 месяца назад

Awesome to hear! Happy to help!

@DSB1338 3 месяца назад

Thanks man, bout to do a few of these, did one before by eye but I think I’ll pick up that jig

@markbroussard7394 13 дней назад

Great video! Thanks for sharing.

@leemathis3241 3 месяца назад

I really enjoyed watching this video. I am a single lady who installed all of my door locks with no experience but wasn't sure on how to add deadbolts to some of my doors. Thanks so much for the detailed video. After looking at this you made my confidence level rise. This will definitely be my next task. New subbie here.

@PlugThatChannelVDA 8 месяцев назад

Just so you know I still come and watch your video on both logins. Keep it goin Matt 👍 👍

@tomshiba51 Месяц назад

Thank you for a thorough and simple demonstration. I ordered the Ryobi jig since it can eliminate my unpracticed measuring skills. Very good.

@ChaiLatte13 8 месяцев назад

I didn't even know they made a door knob jig like that. Very cool!

@ramseydarling 8 месяцев назад

You learn something new everyday!

@jennifermartinus4929 8 месяцев назад

Great job, Matt. 👍🤩

@1891nharas 2 месяца назад

Thanks man. I like how you're so real.

@johnp65 8 месяцев назад

If Kwikset is like Schlage, you can take that Knob apart and turn the key part 180 from how it is to make it match. Good Job on the Install. I have watched so many of your videos lately and decided to subscribe.

@TheFixerHomeRepair 8 месяцев назад

Thanks for watching and subscribing, I appreciate it! 😃

@xxTypeRxx 7 месяцев назад

Thank you for the walk through, step by step. This should really help me.

@wendydix5534 8 месяцев назад

Very informative as usual❤

@jeffwebb8208 Месяц назад

Good and simply put video. Thanks

@chrispugh75 8 месяцев назад

I smelt burnt wood!! Great videos!! Thanks for helping people learn!

@youtubetim3577 8 месяцев назад

Funny, I literally was unboxing my deadbolt im installing today! Guess I'll watch this first rofl

@xamargalber8088 8 месяцев назад

Good morning! Great tips. Thanks for another helpful video:)👍

@ogatkinson6274 8 месяцев назад

Great video thanks.

@dingeldiy 7 месяцев назад

I love how your videos are so well-edited and informative. They're a true inspiration for my own RU-vid journey

@TheFixerHomeRepair 7 месяцев назад

Thanks so much and good luck! 😁

@frostysportstalk 2 месяца назад

so helpful bro i got a electric deadbolt and had no hole and it helped so much thank you

@greggy9786 8 месяцев назад

Good video thanks

@garypoplin4599 Месяц назад

8:56 - You can turn that tumbler the right direction by removing the clip on the lock set, removing the tumbler with the key and turning it the right way. The Smartkey lock sets are the only ones I haven’t figured out how to do yet.

@fintan3563 8 месяцев назад

I have used these jigs before. (The orange one). It made the job easy-peasy!

@ilpostinomotociclista270 6 месяцев назад

Thanks for the video. Very helpful. I would absolutely flip that door knob 180 degrees. 😂

@Pallidus_Rider 8 месяцев назад

The Fixer 👍 I will need to do this on my Dad's 1948 house with original solid wood door.

@82GHOSTKIDKODY 3 месяца назад

Your mistakes in the video added to it in a Good Way Great Job.

@ActiveRideShop100 7 месяцев назад

Damn thanks so much 🙏

@Blazn9k 8 месяцев назад

I love your videos they are so entertaining for me

@JamesLeatherman 8 месяцев назад

Nice. Never knew about that twisty bit in the throw.

@tpep1693 8 месяцев назад

yea, no problem, that's what they make drill and drill bits and hole saw's for.

@BlkFireHawk427 7 месяцев назад

Fixer, if you have come across the issue where the latch or deadbolt is loose or falling out due to the screws stripping out the inside of the door. There is a new door hardware that solves this problem, ReSecure Latch. No more glue, sticks, puddy, or that ugly metal sleeve that ruins the look of your door. They have demonstration videos on how it works here on YT. Great for DYI people, property owners/maintenance technicians.

@cantgetright742 8 месяцев назад

Your oops is pretty much how I find where to find where the striker goes. Even with the jig when you’re pressed up against it. Make some slight marks where it’s bumped up and boom ya got it.

@joewenzel5142 8 месяцев назад

Looks like even if you chisel a little too deep for the strike plates it really doesn't matter as long as they don't interfere with the closing of the door.

@matthewatkinson7558 8 месяцев назад

“Offset” generally referred to as “backset”

@DumpsterFien 4 месяца назад

Thanks man for showing how to do it without a router!

@O_DUBBZ_YUH 8 месяцев назад

Put a little paint on the damage area n its like new. Great Work!🥇✅

@nolongeramused8135 8 месяцев назад

Over the years the big thing I learned about deadbolts and handle sets is "no Kwikset hardware." Or, at least, not the contractor grade stuff used for apartments, rentals, and new developments - the guts are all aluminum and they wear on each other very quickly. My wife and I switched over to higher-end Schlage hardware, while her mom upgraded to some Yale stuff that normally would end up in high security commercial buildings.

@joewenzel5142 8 месяцев назад

Putting locks back together after removing them from the door drives me crazy.

@smarthome2660 8 месяцев назад

You can sharpen those hole saws. Install a thin diamond blade in a circulating saw or a cut off saw, have a cup of water to cool the hole saw after a few teeth & grind each tooth till all are sharp again. I drilled 384 holes in plaster with a 3" hole saw and the hole saw got too dull to cut after every 6 holes. Note: to use a skill saw, mount it upside down in plywood with a slit for the blade and clamp the trigger on - use safety glasses. Every other tooth needs an alternating relief angle, left, right, left etc.

@doorandlocktips 8 месяцев назад

Thanks for showing your video. It takes a lot of hard work to do that doesn’t it you did a nice job if you buy templaco equipment and a router it should make your job 100% easier and you won’t have to buy any more paddle bits. just fostner bits. Your job will be done in half the time. Of course it will cost you an arm and a leg to get set up properly as you know, but boy, will you be the coolest locksmith in town ha ha😂

@pitsnipe5559 8 месяцев назад

Here’s a tip, when boring through a steel door, a few drops if oil on the hole saw will help reduce burning.

@TheFixerHomeRepair 8 месяцев назад

Great tip! Wish I thought of that when I was doing this haha

@endall6783 8 месяцев назад

I've got the Ryobi door knob kit and it worked good. I didn't think about it till the end of your post your Ryobi driver. I've got one of those also but mine is giving me trouble. I can pull the trigger it will work fine but stop using it for 10 sec. and the light stays on and you can't pull the trigger. It will not work I can pull the battery and it resets until the trigger is pulled again. It does the same thing with 3 different battery's I have. It's like a year old thanks for any help .

@Boon-ie1rq Месяц назад

Well now you don't have to worry about whether it lines up or not 😅.

@capone_rd_809 8 месяцев назад

Why not use all long screws for all fours, my ocd went crazy. Great content as usual.

@gregmize01 8 месяцев назад

We installed a security door and it bugs me that the deadbolt and knob locks are at different orientations, lol. The OCD struggle is real!!!!

@jonosay854 8 месяцев назад

💪🏾

@toddthreess9624 8 месяцев назад

I just saw your post on adding a lally column. How thick does the basement floor need to be to take that load?

@curtw8827 8 месяцев назад

You can get a combo where both locks use the same key. Never install a deadbolt that is keyed on both sides, don't want to use a key to exit in an emergency. Don't need a jig, lockset comes with a paper template.

@ekraszewski Месяц назад

Double keyed deadbolts have their applications. A door with a sidelight next to it or having a window close enough to the lock for someone to reach in and unlock the door is the most common. My advice would be to leave a key in the inside lock when at home and remove it when leaving. As far as the jig is concerned, it removes a lot of the possibility for error. Nothing worse than a door that’s drilled incorrectly because the paper template slipped.

@TAD050486 8 месяцев назад

Are you eventually going to install trim around this door?

@socratisgeorgiou1275 2 месяца назад

Great video, but how do you do the chiseling if the door is metal and not wood??

@ekraszewski Месяц назад

You don’t. You need to use what’s known as a drive in bolt or round faced bolt. There is a way to cut the door edge to accommodate the bolt that comes with the lock. But it involves additional hardware and more work.

@Angel-zn1xh 8 месяцев назад

❤🎉

@donobe1 8 месяцев назад

and were gunna do it 👉 right now 😆😃

@thechardestyiv 8 месяцев назад

Where’s the bloopers at the end 😢

@TheFixerHomeRepair 8 месяцев назад

😂. I'm working on an upcoming video and there will be some on that!

@joha7484 8 месяцев назад

💪💪💪👌👌👌👍👍👍💯💯💯❤❤❤

@lindaroyal8161 8 месяцев назад

I'm not familiar with your area or even know what area you're in, hopefully it's safe. I was always told that if there's a window in the exterior door, the dead bolt should be the keyed type on both sides or someone could just break the window, reach in and unlock the door. I don't have any windows in any of my exterior doors buy only use the dead bolts keyed on both sides. Of course, you ALWAYS need to know where your keys are in case of any emergency. Also, if someone were to break in, through a window, they wouldn't be able to unlock and exit through a door with double keyed locks.

@ekraszewski Месяц назад

Leave a key in the inside lock when you’re home. Take it out when you leave.

@gregoryenste8459 8 месяцев назад

Should have ordered a double bore door to begin with,you are welcome. Planning ahead is the advice you should be giving. You are welcome again. Thanks for reading.

@luckehandyman 8 месяцев назад

That steel door covering ruins wood hole saws unfortunately, Almost need a metal cutting hole saw. Ray

@rotaryskratch18 23 дня назад

Constantly spraying the cutting teeth with WD-40 reduces the wear by reducing dry heat friction.

@logic-facts 6 месяцев назад

wtf is with this title? This is the fourth video I watched that doesn't show me how to make the latch space for my metal door. Thumbs down for the misleading title!

@TheFixerHomeRepair 6 месяцев назад

Did you watch the entire video? Are you looking for drilling for the latch into the door and mortis into the side. Because that is in there. Help me understand what you are looking for so I can help. Thanks.

@ekraszewski Месяц назад

On a completely metal door, it’s easiest to drill the 1 inch hole on the edge and use a drive-in bolt. If there isn’t a way to convert the bolt that came with the lock, the hardware store where you bought the lock should have one for purchase.

@Guillotines_For_Globalists 8 месяцев назад

Since the door swings in I think you might want to get 2 pairs of those L-brackets that you would lag bolt to the structure and then place some 2x4s or 2x6s across so that the door could not be kicked in. If you were feeling like your neighborhood could be on the down-and-out, of course...

@1styoudummy 8 месяцев назад

You should show how to do it without a jig. Where you would have to measure and square everything. Good job.

@ekraszewski Месяц назад

Are you aware that since exterior doors have a slight bevel, measuring from the outside and inside will give you different drill points?

@1styoudummy Месяц назад

Yes, I know that. It’s 1/16th of an inch. Not that hard to do the math.

@iputtheiinindependentgirli5442 8 месяцев назад

You know what I had a problem with my locking and my front door and I was like the deadbolt and the other part of my lock and I figured out how to do it and I decided you know what what if I sprayed some WD-40 in the end the whole where the the key goes in and I put it in there and lo and behold guess what it goes in the key works easily and I don't have to fight with it at all and I don't have to fight with the damn lock trying to get it open at all I couldn't believe it when I put the WD-40 in it after I used it it's easy to lock and it's easy to to unlock with the key and to remind you lock it on the phone the inside it's easier to lock to so I can't believe it that that worked