Тёмный

How To Make a Deadbolt Move So Smoothly Into The Hole :) AWESOME Hack! 

Mr Know It All
Подписаться 22 тыс.
Просмотров 52 тыс.
50% 1

NOTHING IS WORSE THAN A STIFF DEADBOLT !!! Here is a 30-second fix with this tool amzn.to/3ufZKlq
Throw out your WD-40, PB Blaster along with all your Slick 50 because we found the best Lubricant for EVERYTHING tinyurl.com/bdf6a6ky
We Guarantee you will love it.
Tools For All Countries
Rotary Tool amzn.to/3ufZKlq
King Size Markers amzn.to/3ahtuHI
Old 99 amzn.to/3yCtWK3
Camera Used amzn.to/3tgXOsq
The small compensation we receive from the amazon links helps to keep our channel available to you ALL for FREE!!
****Disclaimer**** Due to factors beyond the control of Mr. Know It All, he cannot guarantee against the improper use or unauthorized modifications of this information. Make sure you check with your manufacturer to make sure this will not affect your factory warranty. Mr. Know It All assumes no liability for property damage or injury incurred as a result of any of the information contained in these videos. Use this information at your own risk. Mr. Know It All recommends safe practices when working with tools seen or implied in our video and written content. Due to factors beyond the control of Mr. Know It All, no information contained on this RU-vid channel shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this content is the sole responsibility of the user and not Mr. Know It All.

Хобби

Опубликовано:

 

1 июл 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 144   
@bdlii
@bdlii 7 месяцев назад
Did this successfully today. I have done it with relative success in past but your two tips really helped. Marking the lock with magic marker so you know where to work is key. Then using a dremel to file down the strike plate is huge time saver. I used a file in the past but the dremel makes short work of it. Thanks mang!
@MrKnowItAllGuru
@MrKnowItAllGuru 7 месяцев назад
Excellent! Glad to help! Thank you for watching and sharing your stupendous results, we appreciate it, hope you have a great weekend my friend. Guru Mike
@mozzer35
@mozzer35 13 дней назад
Best video on fixing a door that won’t latch.
@MrKnowItAllGuru
@MrKnowItAllGuru 11 дней назад
Glad we could help! Thank you for watching and sharing, hope you have a great week my friend. Guru Mike & team
@crazysquirrel9425
@crazysquirrel9425 4 дня назад
I bought the 4 screw longer catch and chiseled out the door jamb. It now works smoooooothly. House keeps moving throughout the year so nothing stays still. Door certainly works now!
@MrKnowItAllGuru
@MrKnowItAllGuru 4 дня назад
Thanks for watching and sharing, have a great week. Guru Mike & team
@michaellane4762
@michaellane4762 Год назад
When I was younger I did home repairs for years and I always had a set of files just for repairs like that. Always amazed people how simple the repair was.
@MrKnowItAllGuru
@MrKnowItAllGuru Год назад
Agree Michael! Thank you for watching and sharing, hope you have a great day my friend. Guru Mike
@Stevelemontrudy
@Stevelemontrudy День назад
IF you have to move the plate, you can tap in a bundle of 2 or 3 toothpicks into the old screw holes. It works like a charm.
@MrKnowItAllGuru
@MrKnowItAllGuru 22 часа назад
Thank you for watching and sharing, have a great weekend. Guru Mike & team
@steveb9822
@steveb9822 Год назад
Over the years I have trying to fix deadbolts by removing the plate and chiseling with uneven results. Your method makes a great deal of sense and I will be using it next time I have the deadbolt issue. Fortunately, I have a Dremel so I am all set. Great video!
@MrKnowItAllGuru
@MrKnowItAllGuru Год назад
Thank you very much Steve! Glad to help, we appreciate the view and comment my friend, have a fantastic rest of your week. GuruMike
@4rdF1Hunny
@4rdF1Hunny Год назад
You forgot your safety glasses brother! Great tip!
@MrKnowItAllGuru
@MrKnowItAllGuru Год назад
Thanks brett!! We appreciate the view and tip, have a fantastic week my friend. Guru Mike
@easylivingsherpa
@easylivingsherpa 2 года назад
Love all of your stuff Mike. Best on RU-vid hands down.
@MrKnowItAllGuru
@MrKnowItAllGuru 2 года назад
Thank you so much! We truly appreciate the view and comment, makes all we do worth it my friend, hope you have a great week. GuruMike
@skippylippy547
@skippylippy547 2 года назад
Thanks Mad Mike! I just did this on my door and it worked beautifully! Thank you. ❤️
@MrKnowItAllGuru
@MrKnowItAllGuru 2 года назад
Fantastic! Glad it worked for you Skippy! Thank you for watching and sharing, hope you have a fantastic week my friend. GuruMike
@Anonymous-it5jw
@Anonymous-it5jw 2 года назад
Thanks for showing us how quickly this problem could be identified and fixed with a rotary tool. Many of us know about the rotary tool method, but have not been motivated to do the precise marking needed to identify the high spot until we saw the way you used the blue Magic Marker to do it. Thanks for making us smarter about practical matters and finding practical solutions to common problems.
@MrKnowItAllGuru
@MrKnowItAllGuru 2 года назад
It's our pleasure to share but we couldn't do it without all of our great subscribers like you my friend! We truly appreciate the view and comment, makes all we do worth every minute of our time. Have a fantastic week! GuruMike
@gregmosk
@gregmosk 2 года назад
Thank you. You must have been reading my mind. My wife and me just bought a new home last November. The front door deadbolt doesn't catch right. You have to pull the door inward to get it to catch. I had it on my 1 year anniversary to fix list. I'll do it myself now. I own a Dremel myself. A must for different tasks. I was not wanting to remove of the stricker. plate. Once again, thank you Mike!! You channels are awesome 👍👍
@MrKnowItAllGuru
@MrKnowItAllGuru 2 года назад
Glad we could help Greg! All of the deadbolts in our house were catching as well, so hence the fix video :) Thanks for watching and sharing, we really appreciate it, it's always a pleasure my friend, have a great week. GuruMike
@dredger9mm
@dredger9mm 2 года назад
Great tip. I'm gonna give that a try RIGHT NOW on a regular doorknob latch. Jeesh, so simple I'm embarrassed I never thought of this on my own!!!!
@MrKnowItAllGuru
@MrKnowItAllGuru 2 года назад
Glad to help my friend! Thank you for watching and sharing, have a great week and all the best on your project. GuruMike
@missiletm
@missiletm День назад
Crumple up your tinfoil first and then spread it back out on the sheet pan and the bacon will cook better! Now, off to find my dremel and fix my deadbolt! Thanks for the tip Mike!
@MrKnowItAllGuru
@MrKnowItAllGuru 22 часа назад
Great idea!! Thanks for the view and comment, we really appreciate it, have a great weekend and all the best on your deadbolt project my friend. Guru Mike & team
@Beehashe
@Beehashe 2 года назад
I used the bacon grease on my deadbolt and it slides even smoother😜 Before Dremels we used to put the ball end of a ball peen hammer against the strike plate and wallop the flat face with a rubber mallet and it would open up the hole so the dead bolt fit looser.
@bigm383
@bigm383 2 года назад
I did a similar thing with my front door. Kind of panel beat the striker plate with a piece of brass rod and a hammer.
@MrKnowItAllGuru
@MrKnowItAllGuru 2 года назад
LOL, we're with you on that Ben, the use of a bph and a good wallop can work, but we usually find it creates more damage than we could stomach :) Been there done that LOL! Thanks for watching and for the comment, did some reminiscing on the many things I've destroyed in my days LOL. GuruMike
@Beehashe
@Beehashe 2 года назад
@@MrKnowItAllGuru the old BPH can help get out of a lot of jams😀 if used in moderation!
@Manny-mq8gm
@Manny-mq8gm Год назад
I did customer service for many years with a large construction company. I figured out that message many years ago by marking the bolt with white caulking then letting the boat hit the striker plate and then trimming the striker plate appropriately. In some cases I actually had to remove the striker plate and trim the wood behind it and then put the striker plate back but I always got it to work smoothly.
@MrKnowItAllGuru
@MrKnowItAllGuru Год назад
Thanks for watching and sharing Manny, we really appreciate it, hope you have a great week my friend. Guru Mike
@WReaume
@WReaume 2 месяца назад
Thanks for the magic marker idea. Just out my new Ryobi rotary tool thru its first job. Same type of door fix as you demoed.
@MrKnowItAllGuru
@MrKnowItAllGuru 2 месяца назад
Have fun!
@jamescunningham2431
@jamescunningham2431 4 месяца назад
I just used my Dremel tool with the grinding wheel to fix this same problem on a new deadbolt lock, and works perfectly now. Thanks for the hack!
@MrKnowItAllGuru
@MrKnowItAllGuru 3 месяца назад
Great to hear! Glad we could help James! Thanks for the view, hope you have a fantastic weekend my friend. Guru Mike & team
@smc1037
@smc1037 2 года назад
Awesome. The deadbolt on my front door has been sticking the last few weeks. It's gotten so bad I just bent the key the other day trying to get in. Thanks for the tip.
@MrKnowItAllGuru
@MrKnowItAllGuru 2 года назад
Glad I could help smc1037! Thank you for watching and commenting, we really appreciate it, hope you have a great week my friend. GuruMike
@puppygadget3189
@puppygadget3189 Год назад
Love your backyard and pool. Living the dream. And your ❤puppy❤
@MrKnowItAllGuru
@MrKnowItAllGuru Год назад
Thank you Puppy Gadget, my pup is always very interested in what I am doing :) LOL We appreciate the view and comment, have a great week my friend. Guru Mike
@puppygadget3189
@puppygadget3189 Год назад
@@MrKnowItAllGuru just had to put my boy Gadget down on the 26th due to a very aggressive cancer that made him very sick real fast. Gadget went every where with me and slept up against me every night. So I am totally heartbroken and big tears constantly. Just got his ashes so he is back home with me.
@MichaelR58
@MichaelR58 2 года назад
Good tips , thanks for sharing , God bless !
@MrKnowItAllGuru
@MrKnowItAllGuru 2 года назад
Our pleasure Michael! God bless my friend, have a great week. GuruMike
@drozcompany4132
@drozcompany4132 День назад
Great tip! I have no idea how this showed up in my feed, but I was thinking about this problem on a new deadbolt I installed. Weird.
@MrKnowItAllGuru
@MrKnowItAllGuru 22 часа назад
Glad it helped! LOL it's fate my friend :) Thank you for the view and comment, hope you have a great weekend. Guru Mike & team
@tigereyz40
@tigereyz40 2 месяца назад
The doorknob on my pantry door wasn't working. The latch was stuck, wouldn't move. I bought a new doorknob. It was bigger and wouldn't fit into the whole. Your video helped!!! I have a small Dremel and used that to make the whole bigger. It worked! Thank you so much!!!
@MrKnowItAllGuru
@MrKnowItAllGuru 2 месяца назад
Awesome! Glad we could help my friend! Thanks for watching and sharing, hope you have a fantastic day. Guru Mike & team
@DouglasLippert
@DouglasLippert 4 месяца назад
Great video and great sense of humor. 😹
@MrKnowItAllGuru
@MrKnowItAllGuru 4 месяца назад
Thank you Doug we appreciate that mad Mike
@kylemlm
@kylemlm 2 года назад
Too easy...thank you Mike
@MrKnowItAllGuru
@MrKnowItAllGuru 2 года назад
Our pleasure Kyle! Thanks as always, we appreciate the view my friend, hope you have a great week. GuruMike
@coburn_karma
@coburn_karma 2 года назад
Why didn't I think of that.......I took off the plate over, chiseled the corner, and basically almost broke off a part of my door. l have two dremels. You should rename your channel to "Why didn't I think of that". I'm saying this to myself every time I watch your videos.
@MrKnowItAllGuru
@MrKnowItAllGuru 2 года назад
LOL, great suggestion ollie! Thanks for watching and commenting, we truly appreciate it, have a fantastic week my friend. GuruMike
@markw8139
@markw8139 Месяц назад
Awesome☝️..Love the humour too...makes a pain in the butt job a lot easier👌😅
@MrKnowItAllGuru
@MrKnowItAllGuru Месяц назад
Thank you very much Mark! We try to make these fun! We appreciate the view, hope you have a great weekend. Guru Mike & team
@silvergrizzly316
@silvergrizzly316 2 года назад
Mr. Know It All/Guru😁 How in the world did you know my French doors AND my back door needed this fix!😄 you're right, don't even think about messing with the screws😬🤣 I'm goin to fetch my dremel now, then I'm take'n a road trip... IMA GONNA TAKE A DIP IN SOMEONE'S POOL!!🤣😂🤣 Stay Kool my friend! God Bless and tell Lilly I said "ruff" 🤣🤣🤣🤣
@MrKnowItAllGuru
@MrKnowItAllGuru 2 года назад
LOL, the simplest fixes to some annoying problems, Jay! The pool has been a blessing for sure, crazy hot here! We sure appreciate the view and comment, we always look forward to hearing from you my friend. Have a stupendous week and Lily says Whoooooooo, her nickname is bird because she sings like a whippoorwill :) GuruMike
@munkeepilot
@munkeepilot 2 месяца назад
4:06 “Make sure you have your safety glasses on” as you start using the Dremel with NO glasses on 😂 🤓 😂 🤓
@MrKnowItAllGuru
@MrKnowItAllGuru 2 месяца назад
I use OSHA approved safety contact lenses 🤓
@tonymarkham4045
@tonymarkham4045 Год назад
Top name old mate. Like the clips and hints ok. Keep smiling ok.
@MrKnowItAllGuru
@MrKnowItAllGuru Год назад
Will do Tony! Thank you for watching and commenting, have a great week my friend. GuruMike
@chuckeecheese162
@chuckeecheese162 2 года назад
Good tips
@MrKnowItAllGuru
@MrKnowItAllGuru 2 года назад
Glad you think so! Thank you for watching and being here with us Chuckee, we truly appreciate it, hope you have a great week. GuruMike
@marvinboggs
@marvinboggs 2 года назад
Mr. Know It All: I think you once did a video about something that cleans just about everything; I'm trying to clean painted walls and woodwork. Any suggestions?
@dporrasxtremeLS3
@dporrasxtremeLS3 Год назад
New to your channel. I subscribed to Sweet Project cars wat back! Loved this video! I have on door that the dead bolt is correct when it locks, but the door strike on the door knob is loose when it latches. How to fix? I Love bacon! I worry about the aluminum leaching into the Bacon? What do you think? Subscribed! So much FUN to Learn from you! Thanks!!!!!!!!!!!!!
@MrKnowItAllGuru
@MrKnowItAllGuru Год назад
Inside the metal plate that is screwed to the door jam, there's a little tab in there, you can stick a screwdriver in there and pry that tab out a little bit until it latches firmly with no slack. If that doesn't work, send me some pictures to sweetprojectcars@gmail.com and we will see if we can get you pointed in the right direction my friend. Also, no worry about the bacon, that aluminum foil is made for the heat, no leaching. Thank you for the view and for the sub Davil, we truly appreciate all of our great subscribers like you, hope you have a stupendous week. Guru Mike
@allkindsofoutdooractivities
Awesome. That’s the exact way I fixed mine too
@MrKnowItAllGuru
@MrKnowItAllGuru Год назад
Good to hear! Thank you for watching and sharing, hope you have a fantastic weekend my friend. Guru Mike
@jaimepadilla9548
@jaimepadilla9548 2 года назад
Perfect timing. I just had this problem with my door. Thank you. By any chance do you have any for mosquitos?
@MrKnowItAllGuru
@MrKnowItAllGuru 2 года назад
Glad we could help Jaime! As far as mosquitos, we use this amzn.to/3P4KZd7 for outdoors and you can even use one of them indoors once a week and rid your house of about every bug you have :) Mind you, these are great when you are outside sitting around your patio, but for a larger area, make sure there is the least amount of standing water, then use this amzn.to/3urDBAB it's what we use here in the jungles of Florida :) Thank you for watching, have a great week my friend. GuruMike
@jaimepadilla9548
@jaimepadilla9548 2 года назад
@@MrKnowItAllGuru perfect thank you such you have a great week as well
@adnacraigo6590
@adnacraigo6590 2 года назад
I have been looking for a reason to buy a Dremel. Now I have one.
@MrKnowItAllGuru
@MrKnowItAllGuru 2 года назад
Absolutely, Adna! They are a great little tool and you will be surprised at the uses it has! Thanks for watching, hope you have a great week my friend. GuruMike
@HealthPoliticsAndProtein
@HealthPoliticsAndProtein Месяц назад
What is the dremel attachment being used here? Based on other comments, it's a grinding stone. What material is appropriate for this sort of job, though?
@Leonardokite
@Leonardokite 2 года назад
Sometimes you can bend the little tab out on the door jam piece for the main latch so that the door latches deeper and that will be enough. Great way to check where is is rubbing! Mmmmmm, makin' bacon! Let's eat!!!!!
@MrKnowItAllGuru
@MrKnowItAllGuru 2 года назад
Thanks for the info Leonard! We appreciate the view my friend, always a pleasure, and yes, let's eat! Have a great week! GuruMike
@d.k.1394
@d.k.1394 16 часов назад
Thanks
@MrKnowItAllGuru
@MrKnowItAllGuru 3 часа назад
Our pleasure! Thanks for the view and comment, have a great weekend. Guru Mike & team
@josephisaac3603
@josephisaac3603 Год назад
I did see that till now but like I said great tool
@MrKnowItAllGuru
@MrKnowItAllGuru Год назад
It is Joseph! Thank you for watching, have a great week. Guru Mike
@davidlester6092
@davidlester6092 Год назад
It worked!!!! 👍
@MrKnowItAllGuru
@MrKnowItAllGuru Год назад
Glad to hear David!! Thank you for watching and for sharing your results, we truly appreciate it, have a fantastic day my friend. Guru Mike
@greenbackz
@greenbackz 2 года назад
now when someone picks your lock, it's much easier for them to turn it. Just playing lol. great tip!
@MrKnowItAllGuru
@MrKnowItAllGuru 2 года назад
LOL, thanks for watching Es Are! Have a great week my friend. GuruMike
@saleseng
@saleseng 2 месяца назад
Yep I did a couple of those the other day and just used a file
@MrKnowItAllGuru
@MrKnowItAllGuru 2 месяца назад
Thanks for watching and sharing, have a fantastic day. Guru Mike & team
@davidison3905
@davidison3905 7 дней назад
When he closes the door to fully latched you can hear a double clck. The second click is th anti-jimmy pin. The anti-jimmy pin should not be engaged in the stike plate. When its in the strike plate opening the door can be opened with a credit card.
@MrKnowItAllGuru
@MrKnowItAllGuru 5 дней назад
Thanks for watching and sharing, hope you have a great week. Guru Mike & team
@alexguzman5547
@alexguzman5547 2 года назад
Hoo boy you're not kidding about the screws wanting to go back to the old holes. Had that happen a few years back until I'd about filled the whole darned hole with wood filler and redrilled everything 😅
@Marcoosianism
@Marcoosianism 2 года назад
To fill the old screw hole try drilling it out with a 1/4" drill bit then tapping in a 1/4" dowel with wood glue and levelling it smooth when dry. You can now carefully drill your new hole without the bit slipping into the old hole.
@MrKnowItAllGuru
@MrKnowItAllGuru 2 года назад
Exactly Alex!! I'm with you on that my friend, been there done that LOL! Thanks for watching, hope you have a fantastic week. GuruMike
@alexguzman5547
@alexguzman5547 2 года назад
@@Marcoosianism oh it wasn't so much the bit wanting to go back to the old holes as the screws themselves. The wood of the frame had been cut in a really poor way to create the hole for the lock's bolt (looked like someone missed their mark and decided to use a chisel instead) so even after plugging the old holes the screws would either burst out into the hole for the bolt, or would push the plugs enough to wiggle. Replacing part of the frame was something we considered, but everyone else was dithering about it so I got fed up with it and went to the hardware and fixed it up the best way that I could 😅
@Marcoosianism
@Marcoosianism 2 года назад
@@alexguzman5547 I see, so the frame was a bit of a mess to start with. Yeah I hear you, in the end you just have to do what you can 🙂
@michael.w.salter
@michael.w.salter Год назад
If you have to move a striker plate in are worried about the screws trying to go back in the old holes, put a wooden match stick in the old screw hole and then put the screw next to the wooden matchstick.
@MrKnowItAllGuru
@MrKnowItAllGuru Год назад
Great tip Michael! Thank you for watching and sharing, have a great week. Guru Mike
@bdlii
@bdlii 7 месяцев назад
I saw someone use golf tees too. All good ideas.
@Bonezz024
@Bonezz024 4 месяца назад
It’s a good place to start. But in my case the alignment is off to the point where the bolt reaches the edge of the plate. So it definitely needs to be repositioned so I wouldn’t call it a waste of time if filing won’t do the trick.
@MrKnowItAllGuru
@MrKnowItAllGuru 2 месяца назад
Thanks for watching and sharing, have a fantastic day. Guru Mike & team
@jdretiree2433
@jdretiree2433 2 года назад
Any chance we can ever see/meet Julio Caesar Chavez Jorge Johnson Francis Remington?
@joeschleprock3409
@joeschleprock3409 2 года назад
If you look very closely he appears in every video much like Hitchcock did in his movies.(did you see him sitting in the tree in this video?)
@MrKnowItAllGuru
@MrKnowItAllGuru 2 года назад
LOL, Hoolio refuses to be on camera, but believe you me, he is all too real LOL! Thank you for watching, we really appreciate it, hope you have a great week my friend. GuruMike
@pushthebutton8723
@pushthebutton8723 2 года назад
Go to his other channel called sweet project cars.
@MrKnowItAllGuru
@MrKnowItAllGuru 2 года назад
Thank you very much! We appreciate the view and comment, hope you have a fantastic week my friend. GuruMike
@lovethosebudgies66
@lovethosebudgies66 Месяц назад
I want that pool.
@JohnSmith-ys4nl
@JohnSmith-ys4nl Месяц назад
Unfortunately, you have weak strike plates which makes that door easy to kick in. Also, all that glass isn't the best for security either.
@MrKnowItAllGuru
@MrKnowItAllGuru Месяц назад
Well your comment is not the point of the video...and what I have is better than leaving the door wide open...plus I dont live in fort knox and I have Smith and Wesson items that will be used if some idiot tries to kick in the door.
@MrKnowItAllGuru
@MrKnowItAllGuru 2 года назад
Hello To all of our Great Getting Smarter Subscribers!!! This fix will make your Spouse so happy as they will be able to use their deadbolt again!! ***Quote of the week: Never allow someone to be your priority while allowing yourself to be their last option.***
@willmallory9085
@willmallory9085 2 года назад
Sweeet gym Bro.😅
@timg531
@timg531 4 месяца назад
I was replacing my door lock today and my dog was there too to assist me😂
@MrKnowItAllGuru
@MrKnowItAllGuru 2 месяца назад
LOL, they're good little helpers :) Thanks for watching and sharing, have a fantastic day. Guru Mike & team
@nohandle227
@nohandle227 2 года назад
Bakin' bacon......LOL
@MrKnowItAllGuru
@MrKnowItAllGuru 2 года назад
It's fantastic! Thank you for watching robert, we truly appreciate it, have a great week my friend and bake yourself some bacon :) GuruMike
@greghight954
@greghight954 9 дней назад
Good tip but could have been a 30 second video
@MrKnowItAllGuru
@MrKnowItAllGuru 9 дней назад
Thanks for the view, have a great day. Guru Mike & team
@boogalookid9562
@boogalookid9562 Год назад
baaaaaaaconnnnnn ooooooooom
@MrKnowItAllGuru
@MrKnowItAllGuru Год назад
Yeah!! Thanks for watching, have a great week my friend. GuruMike
@lyndacrockett2863
@lyndacrockett2863 Год назад
You can see that the piece sticking out is drooping and it's not coming out bone straight from the. Why not fix the drooping metal lock rather than grinding out the hole where the lot goes?
@MrKnowItAllGuru
@MrKnowItAllGuru Год назад
You can do this fix any way you want to Lynda, we are just sharing what we know works. Thanks. Guru Mike
@monstar.x9315
@monstar.x9315 3 месяца назад
Mine won't allign it going all the way 😊
@celticlightning9703
@celticlightning9703 2 года назад
Nothing every goes straight forward huh Mike? Lol!!!
@MrKnowItAllGuru
@MrKnowItAllGuru 2 года назад
LOL, you're correct! Thanks for watching and being a great subscriber, have a fantastic week my friend. GuruMike
@jonathanflawn8117
@jonathanflawn8117 Год назад
Use parchment paper instead
@MrKnowItAllGuru
@MrKnowItAllGuru Год назад
You can use anything you want to use, we are just using what 99.9% of all people have in the kitchen junk drawer. Thanks for watching, have a great day. Guru Mike
@kimperes5987
@kimperes5987 3 месяца назад
​@@MrKnowItAllGuruI'd like to know if the bacon grease splatters when it's prepared this way in the oven?
@rshoe1023
@rshoe1023 6 дней назад
He says to put your safety glasses on and then proceeds to start grinding with no glasses on! WTF! Also a small fine file will do the same thing almost as fast without any risk of getting metal shavings in your eye!
@MrKnowItAllGuru
@MrKnowItAllGuru 5 дней назад
You can do it however you want to do it, we're not asking you to do anything! Have a great day. Guru Mike & team
@rshoe1023
@rshoe1023 4 дня назад
@@MrKnowItAllGuru Yes I realize that and I will do things the best way I see fit! Seems lately we are seeing a lot more crap on you tube. For future reference when you make a vid, practice what you preach. There's to many hacks out there doing this stuff!
@josephisaac3603
@josephisaac3603 Год назад
Take a little off the lock
@MrKnowItAllGuru
@MrKnowItAllGuru Год назад
You can do whatever you want to do Joseph, we are just sharing what we know works and is the easiest and most economical way to fix this problem. Thanks for watching. Guru Mike
@mytubebobbie06h
@mytubebobbie06h Год назад
😂😂😂😂😂😂😂😂😂😂😂😂😂
@MrKnowItAllGuru
@MrKnowItAllGuru Год назад
Saul glad we could give you a good laugh we always try to bring a little humor to great people like yourself.
@angiemartin7919
@angiemartin7919 3 месяца назад
Thank you! Marry me!
@MrKnowItAllGuru
@MrKnowItAllGuru 3 месяца назад
Any time :)
@d.k.1394
@d.k.1394 16 часов назад
Wears no safety glasses!!! 😢
@MrKnowItAllGuru
@MrKnowItAllGuru 3 часа назад
It's all good! Thanks for the view, have a great day. Guru Mike & team
@kevin_tanks_519
@kevin_tanks_519 3 месяца назад
wiser hardware has a small adjustment tab on the inside of the keeper for the door handle. I am a service tech and I never have had to do this.
@MrKnowItAllGuru
@MrKnowItAllGuru 3 месяца назад
well Kevin as they say, there is always a first time for everything :)
Далее
Yeni Özbək Mahnisi Yoxsa Vefali Reqsi? 😍
00:36
Просмотров 904 тыс.
Кто понял тот понял
00:24
Просмотров 382 тыс.
Prevent 100% of Bug Bites with these 2 Military Hacks!
9:44
COMMUNISM vs CAPITALISM: Who Made Better Power Tools?
24:39
How to Stay Invisible
4:09
Просмотров 197 тыс.
DEAD BOLT HARD TO TURN?  TRY THIS EASY FIX
2:56
Просмотров 35 тыс.
#shoot
1:00
Просмотров 11 млн