How to Brake on a Motorcycle at High Speed | How to Brake at 80-100kph 

Tendulkar started vlogging 😂

1:00 such an honest RU-vidr bro

4:19 main video start💯

Prak. Just want to let you know that I literally learnt how to ride a motorcycle from scratch simply watching your tutorials. Thank you! Keep shining!

Always use 70: 30 formula for braking. Front brake 70 and rear 30. Front brake reduce momentum and speed faster than rear brakes. And it is efficient formula to stop bike in less distance.

I never skip your video because I love dominar 😍😍😍

First of all for a good braking response from bike you should check following things. 1.tyres should be in good condition with proper air pressure. 2. Front shock absorber should be in good condition. 3. Swing arm bush should be tight and lubricated and not worn out as it affects balancing of bike on hard braking. 4. Rest of the points on braking are bang on in this video. Thanks

After 10 accident. I'm watching this video 😂😂😂😂

1st apply front brake then the rear one. 70-80% should be front brake, 20-30% rear brake. And dnt pull the clutch at high speed, instead downshift 1 or 2 gear to increase the engine braking if needed. Never downshift too much it may lock the rear wheel, you need to do the judgements depending on the speed.

thank u bro... before seeing ur vdo.. i always used to clutch first..that used to make my engine free and bike runs fast instead of slowing for an instant time... thank u big brother

I have dual channel abs. And I never needed any video or guidance on braking with it. It's too good to have dual abs. Still having knowledge is never useless. Thanks

i actually learnt biking from all your learnings.. thanks for making it all easier for learners like me .. love you bhai... from West Bengal..

I love that he tells in the starting only that when "that " part will come...Very less RU-vidrs do this...

I'm pretty sure front break first then rear or together. More than 70 percent breaking power comes from front break. Use progressive breaking so it doesn't lock if its non abs. Thats what I was taught by professionals. No offense though, you do what you do as long as everyone get back home safely. ✌

I've been driving since 2014 but I didn't know about engine braking. Thanks for sharing knowledge.

Sachin tendulkar voice button>>>>>

Guru gi✌️🔥...Well explained!!and from now onwards I'm following you❣️💢

Thanks for info. This is really valuable for me as I just started with bike.

Did you say rear break first ...but as my experience you should apply front brakes first or both at a time ...there is more role of front brake..and you shuld also tell about engine braking and how to apply...

You should have taught about the gear shifting before and after speed reduction and engine stalling.

Im a biker but even I see these types of videos because there may be something we have to still learn👍

There is ABS working in your vehicle,bt what to do if there is no ABS?

Thank you so much sir👍 Ap ki videos dekh kar and tips follow kar k hi mai acchi tarah bike chalana sike paya.😊

Thnx bro. Well explained. So after applying leg brake, go for front brake n later clutch to be applied to change the gear, right?

😱 I always apply all three at any speeds.... Suppose i am at 100 nd want to come to 70 i leave acceleration and press clutch+front brake+rear brake !!! My doubt is am i wrong ? I don't need to press the clutch right ?? If i press clutch like this frequently what will happen

Hi prak i am using 2019 D400 .. i am facing a issue with a the chain ,its getting dry after every 200-250 kms..as bajaj is recommending to clean and lube every 500 kms. Please do suggest me some good lube and tips to keep it clean. Egarly waiting for ur reply

Bhai aap onroad demo deekhate ho Bahut accha lagta hai Thank you Aur kuch tips bhi dedo humein taki hum smoothly aur like professional tarikhe se bike ride karein 👏❤❤❤✌

Any uses of gears when applying breaks...I mean after breaking gears will be automatically goes down if we are riding on 5-6 ⚙️...

Jai Shri Krishna sir I love the way u explain us.

Sir how to start our bike when it suddenly stops in uphill area?

E vedya bat ka grip nikal ke💀

ay veriya..bat ka grip nikalkay bat du kya

Downshifting with brakes n half clutch can save your ass in emergency

Good tutorial sachin sir

Here after - skidding on a two wheeler during emergency braking when vehicle infront of me slowed down... Pls never skip the basics - Balancing, Turning, Braking, Handling bike on slope & gradient and following safety rules ! It is easy to learn to ride, but to become perfect, needs practice & self-learning by doing practical of such techniques at some safe & low traffic location or ground.

Good one.. Ek number bhai👍

aila... sachin tendulkar.. nice voice bro.. 😀😁😂

Aila Tendulkar !! love the way you explain like our school teacher in science practical!!

Thik 1 saal pehle bike loya tha...24.10.2021..tumhara video dkh k bike sikha hu

Maine apse sikhi h bike chalani aur is video ka bahut din se intezar kar rha hun

Thanks. Usrfil topi.... also necessary..

Hey, I'd suggest you to put on gloves. That would make your hands more safe. And when you're cruising at normal speeds and not pushing the bike much, what mileage does the bike give?

Nice video 👌😎 You explain the easiest way of engine braking Love from Pakistan 🇵🇰😘

Ek part acha laga video ka kudh se physical practical ka time bata ye nice

Ending may, ओर थोडा आगे जाते ना मेरा घर आता.. ------एक घाटकोपरवाला😂

Wow Love Your Video Bcaz I Never Seen anybody Teaching how to apply brake properly Thanks For Sharing

On a motorcycle if you are in 5th gear going 50 mph and slow down to 30 mph, should you shift down to a lower gear before accelerating or can you just start accelerating at 30 mph in the same 5th gear?

5:48 Due to lack of knowledge I applied front brake while taking blind turn at 40kmph and it caused accident.

The important thing u missed to say. U r vehicle has ABS most of vehicle don't have it.

Sir, your driving is very excellent

Ye video banane se pehle apko khali rasta dhund lena chahiye thaa... Aap kyun busy roads mein braking ka video banarahe ho ?!!!

Sir maine Aao Ka teaching video Dekh Kar he bike Chala na Sikha hai thank you so much sir 💗✌️ love from West Bengal Bhutan border sir 💯🙏

During the break can we use clutch or not?

+ u should do engine breaking too..

मैं आपकी व्हिडिओ देख डेख कर बाईक सिख गया हू बहुत बहुत धनयवाद keep it up bro thank you

Meri Gt road Lahore ma 110km+ speed thi , rear brake ka sath Front brake press ki lekin mana handle Tilt ( Left Push ) kiya orr mera accident ho gaye ... Last tip is most Important ka Handle tilt ( push ) nahi karna , Thank you bro

There is an abs working in ur bike , so plz demonstrate on a non abs bike..; )

Is rx100 good to buy now? (second hand)

Best bike riding tips channel👌👌

Bhai thanks for getting directly to point and not wasting others time

Actually I want a video that how to brake I 300kmph

I came across this video randomly.. don't quote me on this, but seems like brother you have been riding splender all while and then switched to Dominor, let me get couple of facts straight to you: 1. The method which your are teaching for braking is just perfect for bikes which don't have ABS and are under 150cc and so. 2. When ever you are at speeds with 100-130+, just remember this combination (Front brake 55%+ engine breaking 40% + rest rear (use rear in the worst condition), 3. Let me explain it to you why, I am a professional biker so please koi Squid gyan mat dena comment karke, when you have to do breaking in general also, lets say you are doing a hard corner, and you find an obstacle, never fucking downshift, the engine and the rear tyre will get sudden difference in their respective RPMs, apply the front break and very very very light rear break, when you apply the front break in the corner the front shocker tends to dip down which reduces the overall wheel based, and the chances of your fall decrease, it has got to do with centrifugal force, diagonal torque exertion and some basic physics. 4. Now coming back to a scenario which the owner of this channel has tried to depict, try this once brother- (apply front brake in a limit that ABS doesn't kicks in (30% more harder than what you tend to apply generally), do downshift of 1-2 gears with half clutch (then release it) and very little rear break, your bike will come at a hault very much sooner and safer, don't care about gravel, water and all (if you have decent tyres and ABS). try to keep the handle bar as straight as possible. and body posture stable. These suggestions are for bikes with bigger capacity engines 200+ CCs with ABS. Try this one and let me know .

Watching from Pakistan.Your voice is very much similar to Sachin Tendulkar.Thanks for yur valuable time

Bro thankyou itni useful information dene ke liye

I'm the first commenter

4:52 really scene

Front break ka use kab Kiya jata hai meteor 350 royal Enfield me ? Kya 2 gear me use kar skte front break ? 💥 Please reply 🙂

1. Acceleration slow... 2. Press Rear break and creat pressure.. 3. Press Front Break slightly and at a time down your gear.. 4. After little distance you Press break or neutral your bike ....

4:10

Is there a chance of skitting the rear wheels if i press the rear brake at speed of around 50 kmph in 4th gear, without pressing clutch?

me 100 mein abhi chala raha hu lekin rukna nahi aata, toh video dekhliya raste pe, thanks bhai abhi mein ruk paya hu

bhai ye bohot badiya kiya jo skip krne k liye bol diya...time ki value samajhte bhai...

While pressing brake we have to press clutch

Nicely explained again sir

Awesome teaching 👍thanku

Very important thing u have discussed thank you vai

Honestly this video is helpful but only for past generation of bikes..

Sachin Tendulkar vlogs 👀

dada u tube ka real hero!

Ji 2nd gear m bike kaise start kre plz make video on that

Bahut hi helpfull video hain...

Awesome and very nice video Sir 👌👌👌👍👍👍

Love from Bangladesh

Thanks bro saving time bro

Thanks for your information

Important information Mila h isiliy hmne like Kiya h

Vai ap ka voice fully clear hai... To mic ka video banao..wind Noise kaise band karna . Please reply me

I like your videos. But please make it short and precise. I know you're doing long videos for proper clarification but people will miss out so many points for the video not being precised. Make it to the point. Anyways good content 💪

Already knew it ... before your video...

How I break : downshift a gear with revmatching and apply front brake slowly. I rarely use rear break. For emergency stops rear break is not advisable as it can skid.

Very informative bro, 👌 helpful for me.

Awesome guides bro

Thank u sir. Informative video

Iam FROM ANDHRA PRADESH only telugu but ur explanation super sir⚘👍

Har cheez ka hal hai ABS...wo rahega bike mein to kahipe bhi kuch bhi break laga sakte ho

Me neya sikh raha hu bike ride...ek confuse hain Break marne ka waqt keya pehle clutch ko press karke fir Break marna chaiye??....Yaa break me alag mar sakta hu... clutch ko only downshift or upshift k liye use karu? Please bata do....

Mai apka gixxer wala video dekhke bike chalana sikha hai 1.5 sal pahle 😊

Confidence milega tab jab aap practice karenge, permanant bike ho or daliy use kartey ho to ye sab cheej jaldi se samjh jayenge.

Thanks Buddy, Which bike you are riding?

By watching your video I got very high Confidence