This s t p_d case doesn't have power status led and HDD activity led. What a shame! But front panel connector wire has holes for led. Did they forget to add led lights? or did they not provide on purpose to make us angry? Even after paying $130 we don't get what we need. Power and HDD led lights are one of the most important things in a PC case. What's wrong with these manufacturers? Why mankind is evolving backwards? Humans have lost their minds by removing status indicator lights from PC case and removing 3.5mm headphone jack from phones. Governments should ban PC cases without power and hdd status indicators.
This video helped me alot thank you from the bottom of my heart. My build Motherboard - MSI Pro Z790-A WiFi DDR5 CPU - 14600k Case - Lian Li lancool 216 SSD - Samsung 980 Pro 1TB RAM - G.skill Ripjaws S5 16×2 32GB 6000 cl 36-36-36-96 Aircooler - Deepcool AK620 Zero Dark PSU - Corsair RMe 1000W ATX 3.0
Awesome video! Am I correct to say, that you installed the MB in the Water Cooling mode? Air Cooled mode should be liftet up 1 row up if I follow the instructions of Lian li?
@@Mdntech3000 Okay - so I'm going to install it the same way if it doesn't make any difference :) thank you so much for this impressive instruction videos!
1. You connected 2 Cpu Cables on your PSU - do I have to do this, when I'm not overclocking? - Just have one cpu installed and therefore it comes to my mind - I should only put in 1 Cpu at psu and connect to MB ? Correct me if I'm wrong. 2. Does it make a difference if I connect the Lian li included fan hub - with the sata port of the psu or the peripheral one? Don't know what's the difference here
If you don’t plan on overclocking at all the second connection is not needed. Although I’d recommend plugging it in regardless if you plan on oc’ in the future!
@@Mdntech3000 I nearly finished my work - just having one last question: I'm getting the 4070 RTX Gaming X Trio in this system. Since the GPU cables from the PSU confuses me - cause the got 2 ends (wich 6:2 each) and my card does need 12+4 pin ATX 12VHPWR connector. Do I need just one cable? or how should I connect that gpu?
Absolutely does great for the 7700x. I didn’t do a full set of thermal testing but my friend who just games says he has absolutely no problems with it!
Tbh I think I remember having an issue lining up all the mobo screws to the case. If you’re unable to secure 1 or 2 screws to the case standoffs it’s not the end of the world, it’ll still be secure.
@15:10 is from the fan hun, shouldnt it be one fan controller and RGB one and the sata, or just that one in RGB header and thats it, because i see a black cable head covered infront of the rubber opening, what is that for?
Nice video, but i have two questions: where do i have to install the fan hub on the motherboard (exact name) and do i have to add a Sata to the power supply to connect the fan hub or where did you install it? Thx
One Sata cable to the fan hub - this powers the fan hub. Then you can two cables from the fan hub to the motherboard. One 3 pin 5v (argb) header from the hub to the motherboard (your mobo hopefully has at least one argb header). Finally there is a fan header from the hub to the motherboard, thus you can connect to cpu fan or sys fan, either or is fine. These are the three connections needed.
Hmm. I saw only two cables in the Video! SATA is clear now! A second connects the whole Fan Hub with the Motherboard as is understand 🙈 im missing the third one in the Video :(
@@Mdntech3000 I currently have 3 PCs, one having an asrock and 2 with asus motherboards. All 3 of their manuals specify "A2 and B2" when using 2 of the slots. I'm pretty certain most boards have the same layout in terms of ram channels. Unlike Pci-e, and m.2 slots, you should place them farthest from the cpu.
Very nice video, do you think adding 2 fans on top will help gpu ans cpu coolling? Or better on bottom? In your case the temps are cold enough?Thanks keep posting
@@Mdntech3000 the case is awesome! Just finished my build today. However I can't figure out why the RGB 160 fans are lighting up. Other than that it's an amazing case!
I might do a video on it then. It’s an elecrow raspberry pi 5 monitor screen from Amazon. It’s connected to the Gpu using an hdmi cable and it’s mounted in my case using stand-off screws that I also bought from Amazon. Screws come with the monitor but other screws I got work better. www.amazon.com/gp/aw/d/B07FDYXPT7?psc=1&ref=ppx_pop_mob_b_asin_title www.amazon.com/your-orders/pop/ref=ppx_yo_mob_b_pop?_encoding=UTF8&gen=canonical&lineItemId=okooqujrojkoqny&orderId=111-4129096-8651434&packageId=1&returnSummaryId=&returnUnitIndices=&returnUnitMappingId=&shipmentId=M4YLkS2R9
This s t p_d case doesn't have power status led and HDD activity led. What a shame! But front panel connector wire has holes for led. Did they forget to add led lights? or did they not provide on purpose to make us angry? Even after paying $130 we don't get what we need. Power and HDD led lights are one of the most important things in a PC case. What's wrong with these manufacturers? Why mankind is evolving backwards? Humans have lost their minds by removing status indicator lights from PC case and removing 3.5mm headphone jack from phones. Governments should ban PC cases without power and hdd status indicators.
Great video! Im building a very similar build soon. Any way you could make a video discussing what do to after build is complete and first start of the pc with windows/drivers install?
Yea I can, it’ll def be a long video though. There are other resources out there that talk about how to install windows and the like though for now, sorry!
@@Mdntech3000 do you remember if u had to install wifi drivers for the motherboard? Ive seen others with this board who have a hard time getting windows install as there is no internet access out of the box.
hi, can you tell me how to properly switch the i/o from the top to the side. i tried to do it but i cant put the front fans back, the cables are preventing me to put the front fans back
I don’t have the case in my possession anymore but it can be done. I know it’s a TIGHT fit, the cables have to get jammed behind the fan mount I believe. There should be discussions online or hopefully even a video of someone doing it! Sorry I can’t