How to Build a Garage #8 Insulation, ceiling, wall finishes 

RR buildings have to be some of the best buildings I have ever seen. The attention to detail amazes me.

This was built better than 99% of the homes here in Florida. Keep up the great work, your videos are awesome.

As a young professional and being in the industry for a few years with a commercial GC it’s refreshing to see someone put so much time and effort into getting the job done right. I don’t know how many times I’ve done quality control on sloppy craftsmanship on large subs. Keep up the discipline and no doubt you’ll never run out of business!

I never ever get through entire series on RU-vid but this one has captivated me. I just turned 30 and I realized recently that I need to be out there building things again for a living. I worked with a framer/general contractor for nearly 2 years in my early 20s and loved the work but it just wasn't working out at the time on other levels. Im excited to get back into the building world and really appreciate this sort of content to get the gears in my head spinning again

Great video series. I cant tell you how refreshing it is to see a contractor put such a high value on accuracy and stress build quality. You are an example of what every contractor should be. Many would scoff at correcting 1/8” or less out, bravo sir!

Damn, I wish I was young again! Watching your crew and how you utilize all the time saving tips when building and then thinking how we used to do it back in the 70's, 80's and 90's. With these wonderful videos one can become super efficient at any aspect of building if he applies himself properly and watches people like you who have mastered the trade! Great video!

I have had some experience working with contractors from framing to finish work. Some of them do crappy work, so I stopped working for them. I am a perfectionist and I would totally be okay with you building something for me. Keep up the great work! I wish all contractors did fabulous work like you!

I don't know how many times i've watched this video but i never get tired of it.

I just discovered this channel. I built pole barns in the 70s and 80s so this is really fun to see all the developments. Our post were treated with penta. To line up the posts it was batter boards and string. To check something for plumb we used a "plumb bob".

Very nice. Im 54 and this video series gave me enough confidence to do my own garage. Slant roof, 2 windows and subout the concrete floor and I think I will be good to go. Thanks so much!

There really is no other way to hang a ceiling . That machine helps make it look so good . You can take your time and get it right because you can reach it . Great work dude .

It's nice to watch a smooth, well matched, well oiled team working, true proffesionals. Keep up the video's.

MAN, if I was a supplier, I would be falling over myself to get my windows and such in your buildings. A man would be a fool to not work with you for sure! Perfect work!

I really enjoy watching your construction videos! It’s a joy to watch quality work being done. Thanks for sharing.

I love it when plywood sheets are bookmatched!

One of the best instructional barn builds I have seen ever. Including any books out there. Great job !!

It's great! My shed has been completed and it turned out nice looking and sturdy and it is way better than the sheds that many of my neighbors had put up. Of course, I'm pleased with the outcome and this Ryan's ru-vid.comUgkxGZedDTcDfgD7fG_uU4esfx_EgxzlY2_1 Plans was extremely useful to me as a guide.

Nicely done. The attention to detail is well received. As an Air Traffic Controller I totally get the splitting hairs aspect. WELL DONE.

As always, great work. The time and effort to make everything square and plumb early on really pays off on the home stretch. 👍

You're a great builder and a great teacher. I always feel like I learn something with every vid of yours I watch. Thanks for sharing!

Wow, you guys are amazing!!! Thanks so much for making these videos! You are a great teacher, and you are selflessly elevating the standard of the industry. I hope shop classes show these videos to their students, and I think they should be required viewing for contractors. Keep up the good work!

"... and for me, not insulation". LOL, I hear ya bro! Anything BUT insulation, but God bless the guys that will do it - I don't know how they can.

I love watching you guys do good work. I am also a fan of the fact that you don't hide your goofs, you show us so we can learn too!! Keep up the great work, guys!

Great buildings. The detail is phenomenal. Nice to see someone taking pride in their work

As a Plumber {retired} in Australia I have used a lot of fiberglass on roofing and as you say it is not pleasant to use !! I found that the best way to get rid of the itch it gives you, do not scratch it during the day, is to put up with it till you get home and then have a hot shower, even in summer, and I can tell you it gets hot where I live , but have a hot shower with plenty of soap and a hand towel to wash yourself and then cool the shower down to finish off !! This is the only way that I have found to get rid of the glass itch and get a good nights sleep after a roofing job . Hope this is a help to someone out there ??? All the best !

Kyle, you have done a great job as an editor for a while now, but you continue to really grow. The shot at 13:58 is way more compelling than you would think, just watching a couple of people hanging plywood on a wall. You really captured the pace of the job as well as what years of experience looks like. This whole video is really one of your best, as far as camera placement, pacing, and editing. It is fun to watch you grow as a filmmaker, you are doing great work!

Awesome work so far man. I've watched series of this building come along from the beginning i gotta say your comment at the end saying thanks to the viewers who have stuck from the beginning was pretty cool shows your grateful and happy to be able to share your knowledge.👍 keep it up nice work

As close to perfection as you can get👍🏻 nice work mate.

Good mindful construction . The total squaring of the framing with additional checks made the steel work look fun. Good job

When I was doing similar work, we would mark an X on the first sheet of plywood that covered the window or door in a spot towards the center. We would come back with a router and plunge into the plywood on our X and then just follow the framing with a flush bit. It seems quicker than what y'all are doing but at the same time we ended up with a lot of weirdly shaped scrap pieces. Great video series, keep up the good work!

Watching these building videos, well all I can say is you are freaking awesome! Outstanding craftsmanship! Thank you!!! 👍👍👍😎🇨🇱

Out west here, they do their pole frame building differently. They use inset ceiling joists between the trusses, not nearly as strong as the method you demonstrate; via creating true purlins. Also, I was wondering about the strength of such structures, due to you being in Illinois, with the snow, and being near, or in Tornado Alley. The interior plywood is great in so many ways, and then the interior metal ceiling; love it. I'm very impressed with yourself, and crew; very professional!

Great videos Kyle. You and your crew do excellent work and the attention you give the details will assure your success in the future. I wish I were bout fifty years younger so I could do this too.

I just watched the other 7 episodes... AMZING , I'm building my own cabin, and i learn SO MUCH!

I like how you explain each process but what I like most is your work, it is indeed very nice and smooth. I hoping next time to please make a videos regarding any high rise building construction. Thanks

Straight, level and plumb....a must when starting the first day of new construction! ....13

thank so much por your videos. i’m victor sandoval and i am writing from chile (southamerica) very close to argentina. your videos are very important for me!! thanks egain.....my best regards from chile !!!

I love following your work all the way from Ireland. Your attention to detail is mind blowing considering most of these buildings aren't going to be lived in.

100%%%%%%% love that Plywood wall look, man that looks great.... I'm thinking a plywood wall with a tan top cap and a black celling. lol

@ 9:55 you could stack another sheet of plywood on top of the sheet you are cutting to use as a fence for a straighter cut. Not that it's important, but you seem like a guy who would appreciate getting close to perfection.

Another great vid in this series, it shows get it right it the beginning plumb and square and it makes the whole job go fast.. 👍🏻👍🏻👍🏻

He is dead on. Doing what you are good at. For me that is watching this stuff.

You build some great buildings. I come here often to get ideas for my garages. Thx dude.

wish you could drive to northern Michigan to build mine....Kyle you are a great teacher to us followers.

Wow, 60,000 subscribers...when you did Drista’s workshop you had about 8,000. Well earned. Thanks for the videos.

I love how you offset the cheapness of the steel outside with the expensiveness of the clearcut plywood inside :)

Great workmanship guys I have learn alot.

When I built my shop I cut out the window openings using a piloted router bit. It followed the window opening perfectly and cut very nice. I used OSB so not sure if it would work as well with plywood though. I was nice not to have to measure everything out to make the cut. You just drill a hole to get the router bit through and let the pilot bearing do the rest.

I got to tell ya after watching all your videos I'm going to put a building up myself this spring. Thanks for great videos

You know what isssss perfect? YOUR WORK ETHICS👌🏽 your work is worth every penny. Thanks for sharing this series so far I dig it. Why’s ur coil gun shot sparks like that?

Clean, precise, quality craftsmanship....If you were in SE Ohio...you'd have job fill for 4 or 5 years. Well done.

Love plywood and metal walls

excellent work, yall work together like a well oiled machine. thanks for taking the time to film and edit for us, good work sir.

im obsessed with watching all of these videos. damn i wish they were closer to nj lol

Ive been on a marathon watching this build.. all i can think of so far is why is there no plumbing and electrical work being done yet? I think a shop sink would be useful in a garage and definitely a toilet if its being used as a shop. Also what about power outlets /lights hopefully i get amazed in the next few videos 😂

you guys put up a nice looking pole barn, I have put up metal buildings all my life, that is full foundations, and steel not wood, but I still have to say you guys put up a nice looking pole barn.

Level,square and plumb.You guys are awesome

In regards to your sub contracting insulation comment, spot on. Keep doing what you love and others will do the same.

I'm fairly new to the channel, but one thing is for sure, I hit the thumbs up first thing as I have no doubt its gonna be an epic video every time!

Great video guys. Good explain with the laser. Fast work and well done. Lets go to versetta stone

Great video! Quality work guys!

This is such a great method, approach, video and crew. Thank you.

Worked for me, like a charm. Thanks!!!

Hey, kyle My name is kyle aswell sweet name . I'm down in southern Illinois, I worked for a barn company building barns for a while out of the hundreds of barns I have built I can't remember doing anything on the inside most of them were unfinished . We only did a couple inside ceiling and liner panel . If your ever down my way hit me up would love to chat with ya . Love the quality and workmanship you put out . That's hard to find , keep up the awesome work. Thanks, kyle

Loving your vids, tips and tricks. No expert myself but in my limited experience i was taught to use a trim router with a bearing bit to cut out window and door jambs. im sure you know of the method but ive found it useful for me, though a bit dusty.

I am absolutely impressed with your work and attention to detail! Great job!!

Quality project, like your front end set up / layout info. Result less hassle, efficiency of labor and materials, Cheers!

quit my work as a painter friday, gonna be a carpenter apprentice, cant wait to get started in the wood industri :D

Fantastic series, really appreciate the efforts you put into this. Always good for us weekend DIY'ers to learn how the real guys do it :)

I’m 16 and you have inspired me to build and not be scared if it isn’t perfect.

I really like your work!! Still would like to see a finished floor pour. I'd like to see how it would finish out (both inside and out) Keep up the good work!!

Beautiful work and very humble person

Love those new green lasers, way better than the red especially outdoors , i'm assuming electrical will be surface mount. I was always taught , open cell, vapor barrier and closed cell, no vapor barrier....nice attention to detail, always the difference from the pros and the shoemakers.

Awesome job man. So perfect!

Gonna be one damn fine building when finished

Really impressed!

I like how you do you editing, very nicely done. Keep the videos coming!

Awesome job my brother I love your videos to they are the best :)

Great work guys !

You guys do great work. Thank you for doing this series, I enjoy watching it.

Your content has tremendous quality bud, once again thanks for sharing...

Hi there, MOhammed from algeria. I love construction and i'm a big fan of you. I like your work (organized, nice and clean). Wating for the next video. Good luck body

Now you have Greg saying level instead of plumb! 😄

Nice work man...

Nice video. On a project like this, where you go in depth, I think seeing how the other parts of the job that you normally don't do, like that slab and the inside electrical, might be nice, show it all fits together, etc.

That was really cool. Awesome. I can't wait to see how you do the floor.

As usual, really good, informative presentation. Thanks.

When you are cutting out plywood over windows, use a router with a flush trim window bit. It's faster and more accurate. No measuring. Great videos.

Great attention to detail guys Love the vids...

I was just wondering why your nail gun was throwing sparks? Thanks for you RU-vid channel as i am housebound and it keeps me from going mad, lol.

This the best learning episodes and professional . Thanks for all has provided wonderful and effective building structures from scratch to final finishing. Highly recommended to watch

Awesome job keep up the good work I like watching your Channel

i watch all your vids, would love one of your building here in australia

Another great video, as usual!

I just stumbled onto one of your videos by chance; glad I did. Amazing attention to detail!! True craftsmanship! Had to subscribe to your channel. Please keep the videos coming! Incredible workmanship! Very impressed!!

2 thumbs up! I would be curious of what other or unique interiors you have done or seen. I like the look of this so far. However i like the black ceiling better. With maybe a splash of color between the wood and black. Just my thoughts. Great work as always!

You guys do fantastic work would love to have you guys near me to do some work on my house

Thank you so much for taking the time to make these Great educational videos.

Perfect work maybe one day a vid. of your tools im slow at watching I love watching old ones

You need a flush trim bit for those window openings.