HOW TO BUILD A GLASS AQUARIUM - 120G reef tank build PART 3

Подписаться 28 тыс.

Просмотров 247 тыс.

50% 1

HOW TO BUILD A GLASS AQUARIUM - PART 3
Order Small Aquarium Amazon ( paid link )
amzn.to/4aVOspj
Order Reef Tank Lighting Option 1 Amazon ( paid link )
amzn.to/3vVjmiS
Order Reef Tank Lighting Option 2 Amazon ( paid link )
amzn.to/4aT4ArN
Order Clear Aquarium Silicone Amazon ( paid link )
amzn.to/4aGX2ZC
Order Black Aquarium Silicone Amazon ( paid link )
amzn.to/3UgpSKs
LINKS BELOW
How to build a reef tank injection method PLAYLIST VIDEO LINKS. All steps from start to finish .
• HOW TO BUILD A CUSTOM ...
INSTAGRAM -
/ leopazzo_tv
LEOPAZZO TV RU-vid CHANNEL LINK
/ leopazzo
REEF TANK ADDICTION Official Music Video
• Reef Tank Addiction - ...
REEF TANK ADDICTION Season 1 Episode 1
• REEF TANK ADDICTION - ...
REEF TANK ADDICTION Season 2 Episode 2
• REEF TANK ADDICTION Se...
OMG MY KIDS OVERDOSED MY REEF TANK
LIVE STREAM
• My Kids Overdosed My R...
LIKE
REEF TANK ADDICTION Facebook Page
LEOPAZZOTV
JOIN
LEOPAZZO TV - FACEBOOK GROUP SALTWATER FISH TANKS MADE EASY
/ fishtanksmadeeasy
CORALBOY - official music video
• THE WEEKND STARBOY REM...
FULLY STOCKED UP - LEOPAZZO
REEF TANK ADDICTION SONG REMIX AUDIO
• FULLY STOCKED UP - LEO...
CHRISTMAS 2016 kids opening presents
• Christmas Morning kids...
HOW TO BUILD A CUSTOM GLASS AQUARIUM
PART 1 • HOW TO BUILD A CUSTOM ...
LEOPAZZO TV IN CANCUN MEXICO 5 star resort • Cancun Mexico Riviera ...
1x sss5000 skimmer
1x neck cleaner for sss5000
2x 2 little fish 150 reactors
1x 8w turbo twist uv
1x apex gold
1x apex dos
1x apex ddr
4x apex wav pumps
2x wav mods
1x apex vdm
1x apex ALD
3x apex ALD detectors
2x apex eb8s
3x apex afs
1x waveline dc6000 apex ready
#reefaholiks #reefrevolution #fish #sps #reefpack #socalreefer #polyplab #saltwater #aquarium #reef #saltwatergardens #eatsleepreef #instareef #reefingainteasy #lps #livecoral #reeftank #allmymoneygoestocoral #fishtank #mixedreef #nokomislife #saltwaterreeftank #home #minnesota #minneapolis #saltwatertank #squascaping #coralreef #coral #tagforlikes
#reef2reef #reefjunkie #ff #reefing #unique #acros #photooftheday #rarecorals #ilovenyreeftank #reefers4reefers #aquaculture #corals #reeflife #coralporn #sustainable #aquacultured #fishporn #aqualife #reefporn #oceanlife #saltwaterfish #polyps #snowflakeeel #wideangle #eel #reefer
#coralfrags #nanoreef #aiprime #timelapse #aquahobby #nomnom #scoly #nofilter #convicttang #elos100 #clownfish #elostank #cute #life #work #brothers #summer #friends #sister #bouqet #fun #colors #rainyday #wildlife
#lights #earlybird #pretty #white #summerweather #red #coralsarecool #passiton #greenthumb #oldschoolreefer #reefserenity #emmasjedimindtricks #myhobbymyhell #coralsliketodisco #tank #snowflakeclownfish #frag #fishtanks #instadaily #ocean #r2r #aquariumlife #allmymoneygoestocorals #aquariums #coraltank
#saltlife #reefaddict #salt #reefs #sealife #reefaquarium #sea #marine #coralreefaquarium #coralreeftank #coralreefenthusiast #moon #moonlight #sunset #gold #acropora #taiwan #petstagram #nighttime #gloomy #follow #portrait #breakfast #celebrate #forever
#bored #romance #smile #night #falltime #party #sexy #puppy #beach #rider
#saltwateraquarium #coral #saltwater #beautiful #aquaria #insta20likes #water #reef #ocean #swimming #colorsfish #aquarium #watertank #tropical #instafish #freshwater #tropicalfish #fishtank #photooftheday #macrophotography #nature #macro
#beach #perspective #deepsea #customboats #offshorefishing #blackfin #waves #billfish #dolphin #adventure #fishing #sea #diving #deepseafishing #enjoysea #oceanlife #bluewater #wahoo #lifestyle #sportfishing #pelagicgear #yacht #bluemarlin #lifeonwater #scuba #sunshinestate #barefoot #sunshine
#dolphins #beachcurls #beautifulday #sandals #beachgirl #canadian #florida #cantgetenough #virgo #sand #maderiabeach

Животные

Опубликовано:

14 янв 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 316

@AbideinChristFully Год назад

I just watched a video of someone who built a tank using your technique...and you explained it so much better.

@LEOPAZZOPRODUCTIONS Год назад

Amazing to hear. Thank you very much for your feedback. I’m glad you have found it helpful. 🎥🎥🔥💪

@fishrrelaxing9361 5 лет назад

That was an amazing way to build! Way better then caulking the edge and setting each piece one by one! I have a 210g I have to tear down and rebuild... being able to do it like this will be a tremendous time and back saver.

@LeoPazzo 4 года назад

Love this method and I have been building for years

@vinishshetty8055 7 лет назад

you are in my opinion the only person on you tube to has shared injection method of tank building.

@LeoPazzo 7 лет назад

yes correct, as many dont want to show these tips and tricks, i dont think people really understand the value behind these videos,

@whitetrashandhellbound6905 6 лет назад

Joey, KING OF DIY, has a few videos of injection method... he is a good guy to follow if you are a DIY Aquarium Hobby Person.

@LeoPazzo 6 лет назад

Cool thanks for sharing

@LeoPazzo 4 года назад

vinish shetty 🔥🔥🔥🔥🔥🔥🔥

@user-yt2tu7qd5e 4 года назад

This is an ideal video. Totally comprehensive in the essential content. This is how I'm doing my next project.

@seanfleming7947 6 месяцев назад

A big thanks to you for the injection method videos. I followed your videos for making a 180 gallon tank. Awesome job man, well done!

@LeoPazzo 6 месяцев назад

💪💪💯🔥🔥🔥🔥🔥 thank you for your support and feedback.

@user-uh9zv1eq4n 4 года назад

Nice video.Thanks for sharing! And nice soundtrack ! :)

@LeoPazzo 4 года назад

Александър Шушлин thanks buddy

@tenplus1025 4 года назад

Talent bro! Sick AF!

@LeoPazzo 4 года назад

THNX MAN - STAY TUNED MORE TO COME

@vincentlee2460 2 года назад

The water pressure at the bottom is greatest. With the 4 sides not resting on the bottom glass, the sillicon had better hold up or else its just a ticking time bomb.

@LeoPazzo 2 года назад

Tank is still holding up still to today on the 29th floor on a condo downtown

@salvatorecabano5482 5 лет назад

Forget the fish tank... your house is gorgeous

@LeoPazzo 4 года назад

Thanks - u should see the fish tank wall now- it’s much better then what u see in this video

@hariashari6521 5 лет назад

good,,i love your videos ,,,now 1 can understand how to good injection method build a tank,,

@LeoPazzo 4 года назад

Hari Ashari thanks enjoy - stay tuned

@LeoPazzo 6 лет назад

DO YOU GUYS NEED MORE INFO ABOUT THIS INJECTION METHOD? WHAT DO YOU SUGGEST? LIVE STREAM Q AND A ? ANOTHER VIDEO ANSWERING ALL YOUR QUESTIONS? WHAT ELSE YOU HAVE IN MIND ?

@kevk2kim 5 лет назад

I need all kinds of info. Can I work it with 3/8" glass? Can the eurobrace run along the short way?

@LeoPazzo 4 года назад

No 3/8 glass for this size tank

@joesdaddy3036 7 лет назад

Thanks 120 what I hope to build one day,good tips.How do you keep those gaps steady? Will check out the other vids.

@LeoPazzo 6 лет назад

braces and smooth flat surface to work on, and level.

@ArtyMars 2 года назад

This is a sneaky tip i love it! Thanks

@LEOPAZZOPRODUCTIONS 2 года назад

Glad you enjoyed it. Check out my new RU-vid channel called Leopazzo Productions related to camera equipment tips and tricks and so much more

@hidiribrahim 6 лет назад

Thanks for this tips. I already build my 140g. the tank is running but only 2 weeks. I have leak in the corner. i will redo it and build it again using this method. Thank you.

@LeoPazzo 4 года назад

Hidir Ibrahim great hope it goes well for you. Keep us updated on how the repair goes. Thanks

@enescakr4203 4 года назад

wow thats so clean, congrats

@LeoPazzo 4 года назад

Thanks man

@roybormed8804 7 лет назад

hola leopazzo exelente video... oye podras tomar unas fotos de como quedo el cilicon por dentro del tanque por favor? saludos desde mexico

@LEOPAZZOPRODUCTIONS 2 года назад

Thank youuuu

@Maineicefishingenthusiast 6 лет назад

Thanks for your share and tips

@LeoPazzo 4 года назад

Platy King no prob- glad you enjoyed it. Stay tuned for more videos published weekly

@thatguywhocleansaquariums4839 5 лет назад

I actually came back to this video as a reference before doing a 20 long with a built-in sump with all glass baffles and glass bulkhead.

@LeoPazzo 5 лет назад

That Guy Who Cleans Aquariums awesome that’s great news Thanks for sharing

@mariomaldo25 3 года назад

Love your informative videos . Found that float valve thanks . So the bottom panel do you sit the side panels or do you place the side panels on the sides of the bottom panel ?

@LeoPazzo 3 года назад

Hey thanks - I place the sone panels in front of the bottom panel. So the side panels do not sit on top of bottom panel. Hope it helps - check out the latest videos

@Sankichup Год назад

@@LeoPazzo not dangerous when lifting?

@jc49fishniner4lif7 7 лет назад

COOL 👍👍

@JulianaSuperChannel 7 лет назад

George Calderon thanks George I appreciate the feedback and support More videos to come stay tuned

@frankviera9977 3 года назад

Great video! Did you also left a gap between the bottom and the side glasses?

@LEOPAZZOPRODUCTIONS 3 года назад

Thnx - yes I did leave a gap as well

@dudueffting 7 лет назад

hey, did you released the square clamps and pressed the glass panels agaist each other after appling the silicone? by the way, nice tank man! thanks

@LeoPazzo 6 лет назад

NO I DIDNT I LEFT IT AS IS

@Maineicefishingenthusiast 6 лет назад

Nice build brother. I'm doing a 25g cube build right now. I'll be uploading soon.

@LeoPazzo 6 лет назад

Awesome keep me posted- let me know how it goes

@jootai 6 лет назад

What are those tools called you use on the corners? thanks man

@LeoPazzo 4 года назад

jootai they are called 90 degree corner clamps. You should be able to find them at your local hardware store

@airnashville3883 6 лет назад

Nicely done and what a nice tank. How much do the materials for a tank that size run?

@LeoPazzo 4 года назад

AIR Nashville price of glass has gone up. Approx 1000$ CND for materials - glass and silicone

@blizzardpct 5 лет назад

awesome!! where you got those clamps?

@LeoPazzo 4 года назад

Hardware store

@neilbharath1847 4 года назад

Hey thanks for this vid helps alot with the injection method but how did you maintain the gap? at the bottom and sides?

@LeoPazzo 4 года назад

Hey there thanks for your feedback. To maintain the gap at the bottom the glass has a lot of weight so it stays in place. All you have to do is place the glass down on the level ground and then just give it some space from the bottom panel. The weight of the glass itself hold it in place. Along with the metal clamps at the top of the tank to hold the top. The bottom of the side panels will hold itself in place as the glass is heavy.

@neilbharath1847 4 года назад

@@LeoPazzo thank you!

@aimeevidamour7230 4 года назад

What thickness glass would you recommend for a 120 gal 48x24x24 I’ve heard 10mm-12mm

@LeoPazzo 3 года назад

1/2” glass which is approx 12mm thick

@thegavatar9036 3 года назад

Have you double silicone the bottom? As you are using black for the gaps and it looks like you have clear silicone around the bottom at the end of the build?

@LeoPazzo 3 года назад

I used clear silicone for the whole tank side walls and bottom glass . All clear silicone. I did not use black silicone . Hope this helps

@Saiprakash0156 5 лет назад

New subscriber

@LeoPazzo 4 года назад

Sai Prakash awesome thanks 🔥💯

@adda2417 6 лет назад

On Your 120 gallon direct injection video how did you inject the bottom of the glass with the side glass?

@LeoPazzo 4 года назад

I injected it the same way. I left a gap as well at the bottom glass to the side panels

@sirpfa 6 лет назад

Thank you for sharing, a question comes up here... If taking such deep engineering approach then why not using UV glue instead of Silicon?

@LeoPazzo 4 года назад

Sir Fa not sure good question. Must be a chemical thing inside the UV glue or strength or who knows. Interesting question - stay tuned for the latest videos 🌎

@deeham21 3 года назад

How did u ensure a gap on the bottom before silicone? Another few toothpicks? Then do you remove them after dry and fill those spots later?

@LeoPazzo 3 года назад

Hello Itskano - no I did not leave toothpicks in the bottom as I was siliconing the tank. All I did was adjust the bottom glass to be even all the way around the edges which was approx a Toothpick thickness away from the side walls. The side panels of glass are so heavy that when the side panels are standing up the weight of the glass itself will hold its place when you have adjusted the spacing as you like it. What is important are those clamps at the top of the tank to hold it all square snd straight and also be sure to keep the tank level when building

@gustavovelazquez8272 7 лет назад

hola. como hiciste para dejarle la distancia entre los vidrios de alrededor y la base? Gracias.

@LeoPazzo 4 года назад

Gustavo Velazquez hey I don’t speak Spanish - I think it’s Spanish lol - translate

@BraddaMarlon 4 года назад

You might have covered this. But what size thickness is that glass I'm building a 33x33x21 tank and wondering if 3/8 would suffice

@profpaue9182 4 года назад

Go for 1/2"

@solomonsisland2018 3 года назад

Hey bro thank you for the dope video ! I have one question , I know say put painters tape on the seam so silicone won’t come out and pull it off so it won’t get stuck, do you put tape on the bottom seams as well ?

@LeoPazzo 3 года назад

Hey Solomon’s Island for your feedback and support. No I do not put tape at the bottom of the tank. I leave the bottom just resting on the drop cloth sheet. Once tank is dry after 3-5 days I lift up the tank and peel back the drop cloth that is stuck to the silicone that squished out the bottom and dried to the drop cloth sheet. Once the drop cloth is removed, you can simply cut any excess silicone off with a fresh razor blade. This is the best method so far that works for me. I have used tape before at the bottom and it doesn’t work that well because the tape really gets stuck to the silicone. I prefer to use a strong professional grade drop cloth. Under the drop cloth is a 3/4” thick plywood which is sitting on a level and flat surface.

@solomonsisland2018 3 года назад

@@LeoPazzo perfect thank you so much I didn’t want to pull out the silicone from the bottom of the tank so I will use a drop cloth as well, and last question I didn’t take in to account the toothpick gap when I was doing my measurements for my 60 gallon will that change the size of the tank a little?

@LEOPAZZOPRODUCTIONS 3 года назад

@@solomonsisland2018 yes calculate the measurement of the glass with the tooth pic thickness in mind

@seanwilkinson5403 Год назад

Really interesting! Does the gap being larger not make the tank weaker? I've build a bunch of 40s and now I'm looking at a 275 but I'm really stressing on the joints, have you had any experience with mitred joint glass? Also I'm thinking of tempered for the base and annealed for the sides, would annealed also work for the base? As it would be cheaper to to have all the glass the same. Thanks a bunch for the vid

@LeoPazzo Год назад

Hey Sean. No I haven’t built a tank with 45 degree mitred corners. I have also used flat cut with beveled edges. You can use tempered glass for the bottom but for this tank build I didn’t use tempered glass. I am not familiar with “ annealed “ glass so I can’t answer that question or give my opinion about it. For that 275 gallon tank I would use 3/4 inch glass for bottom and use 5/8 inch glass for the sides. I would euro brace the bottom of the tank from the inside and I would euro brace the top of the tank as well.

@seanwilkinson5403 Год назад

@@LeoPazzo annealed is the best way to go as it's less fragile and won't explode when knocked, yeah I'm going 18mm tempered base with 14mm annealed sides, don't wanna risk it popping on me xD

@LeoPazzo Год назад

@@seanwilkinson5403 good stuff man. What method will you be using for the silicone ? Injection method ? Be sure to to clean the glass edges and have it all prepared level and square before silicone.

@seanwilkinson5403 Год назад

@@LeoPazzo usually I have a chipboard box I use for lining up, silicone and screw it together then finger the edges, but your way seems much easier. Do you have any studies on leaving that much silicone in the joins? I've always gone pressure fit but always looking to improve.

@nalixl 3 года назад

Would you say your experiment with injecting from the inside and taping the outside was a success? Also, are the side panels siliconed to the sides of the bottom panel or are they resting on (and siliconed onto) the bottom panel? If the latter option, how do you keep spacing between the bottom and the side panels while applying silicone and curing?

@LeoPazzo 3 года назад

Heyyy Jaap. Yes the side panels are siliconed to the sides of the bottom panel. Not on top. The weight of the glass will hold its position at the bottom. You just have to space it out at the bottom and then space it out at side / top and then clamp it in the 4 corners . Hope this helps 💯💯

@loki8686 2 года назад

@@LeoPazzo what about the front and back panels? Are they resting on top of the bottom glass?

@LEOPAZZOPRODUCTIONS 2 года назад

@@loki8686 no. None of the side walls are resting on the bottom glass.

@loki8686 2 года назад

@@LEOPAZZOPRODUCTIONS I appreciate your patience brother. I read this in one of the comments. You have explained this in many comments. Thank you!

@LEOPAZZOPRODUCTIONS 2 года назад

@@loki8686 no problem. I hope these videos help. I have a few other tank builds and I have created a playlist on my channel. Maybe one video msg explain or show better then the other. Feel free to msg me on IG or FB or email 🌎🎬

@doorstoppers9287 5 лет назад

How did you get silicone where the bottom panel meets the walls glass panels?

@Nick-fw5uj 5 лет назад

I would say from the inside but i am not sure

@sabi56847 2 года назад

Four corner,what you have kept to hold ?what you say for that black holder?

@6ixflixx 2 года назад

Corner 90 degree clamp 🗜

@rockfella27 3 года назад

5:50 there you revealed an industry guarded secret! thanks for that :)

@LeoPazzo 3 года назад

I totally agre. I made this video showing these tips and tricks as I knew I was giving out key information that I was not easily able to access online. Lots of this info is from trail and error of building tanks over several years. My first tank I built I was about 14 years old

@rockfella27 3 года назад

@@LeoPazzo 14 wow. Thanks for sharing!

@rockfella27 3 года назад

@@LeoPazzo Used the same method yesterday like a pro!

@LEOPAZZOPRODUCTIONS 3 года назад

@@rockfella27 amazing - great to hear it went smooth. 💪💪🔝💯💯💯

@LEOPAZZOPRODUCTIONS 3 года назад

@@rockfella27 we here for you brother. Let’s get it 💯💯💯💯💪

@whitetrashandhellbound6905 6 лет назад

Yo... I just bought an older Hagen 120g tank. The previous owner pulled a side panel off trying to "Drag It" across his carpet apparently... anyway... as I stated, the side panel is pulled off... the top and bottom trim attached to this panel broke off obviously compromising structural integrity. The glass is 1/2" thick, polished and beveled. I tore it apart and cleaned up the glass (A torturous process if anyone is considering doing this... but keep in mind, everything is better with a bag of weed lol). I noticed you built your tank with a "Flat" bottom... could I do the same? The tank I have is slightly tinted blue/green so obviously an older tank, I would assume early to mid 90's. I have done my research... fully confident of being able to reassemble the aquarium... I would hate to have it all fall apart in my house just because of no Trim or not being raised up the 1/2" or so that the factory trim held the bottom panel up... not sure that made sense lol but the Original Factory Trim (Which is Broken now) held the bottom glass panel up into the wall panels about 1/2" or maybe 3/8". I don't expect you to know... but I figured I'd ask. Any help or information from anyone who has tried this please let me know. Thanks

@LeoPazzo 4 года назад

White Trash and Hellbound i understand what u mean about the bottom panel being raised up. This must be a store bought tank and. It custom built. You would need new trim at top and bottom if damaged at allllll. As the factory uses thinner glass to save money and uses plastic trim to support it as plastic mould is cheaper then thicker glass. So they use the plastic trim as structure to the tank build. Any damage to plastic trim then the structural strength of the tank has lowered and is now risky. I honestly don’t recommend fixing that size tank. If anything here is an option. Find out if the glass is tempered glass tank - walls and bottom. If not tempered you can strip down the tank 100% clean all silicone and have someone cut the glass for you into a smaller sized tank and maybe buy 1-2 pcs if really needed and build yourself a tank injection method.

@andrewmcallister4151 2 года назад

So I'm replacing just one panel. It its a front panel It sits in top of the bottom panel, how do I get that gap on the bottom? Would this clamps actually hold.it.up.for me how long till you took off clamps.

@LEOPAZZOPRODUCTIONS 2 года назад

The way I built this tank. All front and back and sode panels of glass are NOT sitting on top of the bottom panel of glass. They are on the outside of the bottom panel.

@iole96792 7 лет назад

Damn... wish I had seen your video before I put mine together... I had one hell of a silicone mess.

@LeoPazzo 4 года назад

iole96792 Hahahah it’s ok. It’s a learning experience

@rockfella27 3 года назад

Happens with all man hahaha

@dantekaori8648 4 года назад

SMART

@LeoPazzo 4 года назад

Solid thanks 🙏

@ABM261-zi2gl 4 года назад

Nice work man! I have a question. Is it possible to build a 2 foot long by 3 foot high and 4 inch wide tank? Let me just ask you straight. How much would you charge to build it?

@LeoPazzo 4 года назад

Hey there , I’d say all ballpark price to build that tank would be approx 800-1000 As the tank is very tall it will need extra glass supports and 1/2” or 5/80 glass with eurobrace and bottom brace etc. Stay tuned for all the latest videos

@noahdavison451 2 года назад

When you inject the silicone to the bottom perimeter, how do you keep it from sticking to your drop cloth?

@LEOPAZZOPRODUCTIONS 2 года назад

When it dries the drop cloth just peels of carefully

@bhashkarrajmishra848 6 лет назад

Can you please provide me the glass dimensions that u cut your glass? i thought we need same size glass for this like to make 2.5*2*2ft tank we need 30*24inch length glass and another 24*24 but i see your front and back pannels are slightly bigger.

@LeoPazzo 4 года назад

Bhashkar Raj Mishra yes from front and back panels overlap my side panels . As when u look from the front of tank you should see one piece of glass and not see the corners of the side glass panels . I have a playlist of videos on how to build a reef tank- search my channel- 60g reef tank build

@stephenpatton8690 3 года назад

Thanks for the video! Can you post a materials and cost list?

@LeoPazzo 3 года назад

Contact me for more details - email leopazzo85@gmail.com

@sebastianiabrasu2941 6 лет назад

Good job down hat.

@LEOPAZZOPRODUCTIONS Год назад

Thank you very much

@abdaz7159 Месяц назад

Paman.. Berapa jarak lem antara sambungan supaya bisa dengan metode ini

@AveeksAquaWorld 5 лет назад

most of the tanks I have seen, and all the tanks I build, the walls rest on the base glass. but in your video I was pretty surprised to see the base being smaller than the perimeter. so, when you inject the sides to the base, how do you prevent the silicon to adhere to the floor (or whatever you have on the base)?

@michaelharris9849 5 лет назад

The way you are building your tanks is wrong and puts shear forces on the silicone, the way Leo builds his is the correct way to build aquariums. As for silicone adhering to the base surface, that's why he used a drop cloth smoothed out perfectly flat so that once the silicone had dried he could flip the tank and peel away the drop cloth preventing it from sticking to the board underneath. Of course if you read through the comments section there's answers to every question you could think of, but I'll spoon feed them to you just this once.

@LeoPazzo 5 лет назад

Michael Harris well said Michael

@michaelharris9849 5 лет назад

No worries LEOPAZZO TV

@davidnjenga9440 4 года назад

Same here,i have been making glass fishtanks upto 12 feet long with the walls resting on the base glass ,I use the injection method and I have never had a problem for 15 years I have been doing it and believe it or not i have never had a single leak. There is no wrong method,it all depends on the skill of the workman.

@davidnjenga9440 4 года назад

@@michaelharris9849 there is no wrong way

@blueschild61 5 лет назад

How do you maintain the gap between the vertical walls and the floor?

@LeoPazzo 4 года назад

blueslove61 clamps at the top and the weight of the glass once in position will not move. It holds itself in place -

@corykeeler2655 7 лет назад

This method takes the scare out of me building my 210 gallon! What kind of clamps are those? Also i wonder if its better to compress the glass after you inject it because it reduces the possiblity of shearing apart, no?

@LeoPazzo 6 лет назад

the silicone is already contacting the glass if it is injected correctly. and any alteration is no good. next thing you know you have half dried silicone and now your shimming your tank back and forth to get it square?> not good. the tank glass should all be 100% set before starting injection method.

@Dakashkatariya 6 лет назад

LEOPAZZO TV Can you please tell me the name of tool you used to hold corner of the walls of the aquarium so that i can get it to make my own please

@muhammedyuksel6059 6 лет назад

the name of the appliance you use to fix the side windows. I could not find it in turkey

@LeoPazzo 6 лет назад

+muhammed yüksel interesting , how can I help

@WEUWE100 4 года назад

Thanks for the Info! It helps a lot! I have an question. I want to build 100*50*50 box out of Plexiglass. And I would put water in about 10cm height. In that case, how thick glass should I need? Do you think 2mm would be too thin?

@LeoPazzo 4 года назад

100 inches or 100cm? Are you building out of acrylic or glass ?

@winzikh 5 лет назад

Hi boss. Can you pls help me share your measurements in millimeter for all (5pcs glass panels) i will using 10mm glass for (4ft x 2ft x 2ft) tank. Thanking you in advance

@LeoPazzo 4 года назад

winzi winz 10mm glass is not thick enough for this size tank. I do not recommend you build a tank that size with that thickness of glass - 🔥💯

@mitchvandam3688 3 года назад

Hi Sir, How do u calculate the size for the gap of the toothpick? So for example 60x50x50 can you help me out maybe? Kind Regards,

@LeoPazzo 3 года назад

Hello Mitch Van - depending what size tank you will be building and what thickness of glass you will be using for your tank build. The toothpick was used in this video as an example so people can see the size of the gap. Roughly estimate the thickness of the tooth pick and calculate that into the size panels of glass you would need. Your best bet is to draw it out on paper so you can visually see how you will be assembling the glass tank. And you can calculate the length and width of each glass panel . Hope this helps 💪💯

@jordanchristle467 Год назад

Where do you get those cool clamps? Also do you think this method would work on a water box 130.4

@LeoPazzo Год назад

I’m not familiar with water box so I am not sure

@LeoPazzo Год назад

Clamps from Home Depot

@brakeawayfromthenorm2923 6 лет назад

Awesome wall tank but please fix the drywall

@veoquenoesunproblema 7 дней назад

I’ve been checking videos related to this method and many of them are saying that maximum is 50 us gals tanks only and this is 120 US Gals. Which is the thickness of the glass??

@LeoPazzo 7 дней назад

This tank glass thickness is 12mm non tempered. And I just recently spoke to the owner of the tank and they told me the tank is still running all these years later.

@veoquenoesunproblema 6 дней назад

@@LeoPazzo thats nice, very important data to save for later, thanks for your video

@LeoPazzo 6 дней назад

@@veoquenoesunproblema ⁠ no problem at all. Thanks for watching and supporting the channel.

@mohdowaiskhan6322 3 года назад

Sir plz tell me how to joine the base or master glass pieces for induction molding

@mohdowaiskhan6322 3 года назад

Wating for your reply

@fuzuaquariums5730 6 лет назад

how did you make the wall mount aquarium behind you at 1:58 and how did you mount it

@LeoPazzo 4 года назад

Fuzu Aquariums i built a wall and built a stand for the tank in the wall. I Custom built it in my basement. U should see the wall now- much better looking then this video

@salimm76 6 лет назад

What should be the exact size of the panels to make a 55 Gallon. I know it is 48 x 13 x 21, please give the exact size of front panel, bottom and side panel, so that they all fit together. Thank you for your help.

@LeoPazzo 4 года назад

salimm76 this is part of the calculations you will need to do for each tank size and glass thickness is different . I would need more info. I would suggest using 1/2” glass as well for that 48” long. You can use 3/8 but you will need extra supports- eurobrace top and bottom

@kentgbach1037 7 лет назад

@LEOPAZZO TV - How did you keep the gaps from closing up? I saw another guy use some zip ties. Didn't see that you had anything gapping your glass open.

@LeoPazzo 6 лет назад

clamps holding the glass at the top, all the weight the bottom is harder to move. GUYS PLEASE KEEP IN MIND THE EXACT MEASUREMENT OF THE GLASS IS KEY - VERY IMPORTANT, THIS METHOD CAN NOT BE DONE IF THE GLASS IS NOT THE CORRECT MEASUREMENTS.

@janmarchosaturos8071 2 года назад

What do you call the clip thingy you used to connect each angle?

@LeoPazzo 2 года назад

Those are called 90 degree corner clamps

@erichgunthel8382 5 лет назад

Is there a gap at the bottom as well?

@LeoPazzo 4 года назад

Erich Gunthel yes correct there is also a gap at the bottom as well all the way around the edges / perimeter of the glass panel. Inject the silicone there as well as the side walls corners . I have another tank build that I show how to use injection method. 60g tank build Leopazzo tv

@motoxposse 7 лет назад

I have never seen a tank build by any manufacturer that puts the bottom panel inside the side front and back panels. They do use an injection method but the sides front and back panels sit on top of the bottom panel for strength. They use a silicon spacer that the panels sit on top of creating a gap on the bottom panel then inject it the same way you showed. Have you tested your way for durability/strength ? With other tanks if so how long have they been filled up in use?

@LeoPazzo 6 лет назад

this 120 is currently set up since dec 2016 downtown in the city on the 29th floor. along with the custom built stand i build. which you can see in some of my other videos. thanks for the suggestions and comments, you have some great points. what type of test would you like done? i am interested to test the tanks durability.

@arieajadechcuy1537 6 лет назад

Ihave build tanks with that method too.. N its strong enough... 😊😊😊

@MadScienceHacksTV 6 лет назад

LEOPAZZO TV .....All ADA tanks are made as this video shows - All panels around the bottom glass and not on top. ADA make the best tanks and if they use this method in their highly priced tanks, I guess you could use this too. It's important to know that the silicone needs to be applied on the same plane in which the force of water is applied. All forces push down and out. The downward force is handled by the stand and the outward forces need to be handled by the silicone on the same plane. This is the correct way to build a tank. Having the sides sit on top of the bottom glass introduces a shear force going outward on all the beads of silicone on the bottom glass. That is where most of your leaks happen. Learn a lesson from the Japanese and understand the physics at play here. Build it how you want it...and fix it when it leaks.

@sirpfa 6 лет назад

MAD Science Hacks good research but a question comes up here... If taking such deep engineering approach then why not using UV glue instead of Silicon?

@edmundooliver7584 5 лет назад

I've seen a builder put 1/8 spacer on the bottom panel to keep the bottom from touching the frame and yes he put the front and sides panel like leo did.

@sadekismael 6 лет назад

What is the name of that black tool u placed at the corner to hold the glass panels

@doorstoppers9287 5 лет назад

sadek ismael no one will answer this question for some reason, I seachered corn clamp on amazon and think that’s what they are. Did you find out what thoughts clamps are called?

@andystokes8702 5 лет назад

@@doorstoppers9287 Go on Amazon and search on - ''90 degree clamp''. Loads of options and a range of prices.

@doorstoppers9287 5 лет назад

andy stokes thanks

@ImAwdheshShukla 4 года назад

I was surfing youtube searching how to make Aquariums. I'm sure I can stop now as you've answered 99% of my questions and cleared doubts in comments section. So all I've to do is to stick to your channel Thank you. One advice/ feedback idk but I'm still confused on LXB of these 12MM glass size. Not sure how much glass in MM or CM to order as they take order in complete inch, mm or cm not like 3/4 inch. Again, Thank you.

@LEOPAZZOPRODUCTIONS 4 года назад

ImAwdheshShukla awesome thank you for your feedback. I am not really clear in your question. You have to know what size tank you want to build and calculate the size glass you need. The thickness of the glass and the LxW of each glass piece. Ask your question again and hopefully I will understand exactly what you mean . Thanks

@ImAwdheshShukla 4 года назад

@@LEOPAZZOPRODUCTIONS Hi Leo, Please read my comment on How to build reef tank 60 gallon past 2. I believe that is best video to ask my question properly and I appreciate it that you respond. Glass measurements as crucial. I want to follow you step by step and I do read all comments before asking any questions. I made a comment with my laptop with different email and you did respond but it wasn't enough. I hope I could explain better again.

@LeoPazzo 3 года назад

Email me anytime

@BraddaMarlon 4 года назад

So did you deduct an extra 1/8 from the side panels to make room for silicon. Let's say tank is 24 dept with 1/2 glass. Did you make the sides 23 1/2 or 23 3/8. Also was the. Bottom panel injected also? This just gives a cleaner no bubble seam. Nicely done

@LeoPazzo 4 года назад

Correct

@LeoPazzo 4 года назад

All sides and bottom injected and yes I left an approx 1/16 to 1/8 gap for silicone. I’d say leave 3/16 total which will be enough gap for both sides .

@BraddaMarlon 4 года назад

@@LeoPazzo thank you for getting back to me. Much appreciated

@MilosStevanovic1 4 года назад

You can tell this guy built few aquariums in his time.

@LeoPazzo 4 года назад

Hahahah yes . There is something about glass and water that I love. Building tanks is fun. My first tank I built was when I was 15 years old. I found some scrap glass and didn’t know what to do with it until I thought about a fish tank. I built my first tank at 15years old and it wasn’t the injection method and I did have success but the amount of work involved was such much more. And now with this injection method I have changed my tank building techniques. Hope the video helps. Check out the playlist in the description of this video

@hugossacramento 7 лет назад

Hey Leopazoo, thank you. So I have a doubt. What I have to do after inject silicone? Have I to press the glass to close the gap?

@LeoPazzo 6 лет назад

not really, you can leave the glass as is once you inject the silicone. you just have to have the correct size gap to start with. once you have the correct gap, lock it in with the metal braces and inject the silicone, you can slightly tap on the glass if you think it will help with your contact bond. but ideally you should be injecting the silicone so the gap is completely full with silicone.

@tencru 4 года назад

What did you use to leave that separation between crystals?

@LeoPazzo 4 года назад

I used toothpicks pic gap and clamp

@tencru 4 года назад

@@LeoPazzo wow I did not expect you to answer me because this video is 3 years old. Thanks you so much from spain

@jwaquatics5792 2 года назад

How many tubes of silicone did you use?

@LEOPAZZOPRODUCTIONS 2 года назад

From what I remember I used 1.5 tubes approx. I would always want to have extra tubes just in case you need. If you don’t use the extra tubes just return them or store credit. You want a one time seem-less silicone application and cure

@gavin4913 6 лет назад

Where did you order your glass from?

@LeoPazzo 4 года назад

Gavin local glass supplier in GTA Toronto Canada 🇨🇦

@ivanfrtunic752 6 лет назад

great video... name of a song starting at 4:05 ???

@LeoPazzo 4 года назад

Ivan Frtunic this song is by my buddy John Matthew - I recorded him here at my house and added it to this video- check me on Instagram for even more content

@bruce3579 3 года назад

Where do you get the glass for that

@LeoPazzo 3 года назад

Local glass shop. 💯

@ItzAzAM28 Год назад

In normal method, (not injection) do gaps between the glasses is important ? Is yes do tell the reason behind because in injection it is necessary for injection, but what about normal one, I'm making aquarium from years and i don't like gaps in between the glasses so....

@LEOPAZZOPRODUCTIONS Год назад

Good question. Both methods will require a gap with silicone between the glass. Without the silicone gap the 2 pieces of glass could / will be touching each other and can create a pressure point on the glass which could cause it to crack or break. For example when building an aquarium the normal method, you place the silicone on the 1 piece of glass and you butt up the other glass up to the glass with the silicone on it. That right there is creating a gap with silicone so the 2 pieces of glass don’t touch each other. Hope this helps and clarifies.

@ItzAzAM28 Год назад

@@LEOPAZZOPRODUCTIONS okay like in normal method 1mm or like that gap is okay? Just glass should not touch each other right ....

@LEOPAZZOPRODUCTIONS Год назад

@@ItzAzAM28 correct. Don’t allow the glass to touch each other.

@ItzAzAM28 Год назад

@@LEOPAZZOPRODUCTIONS okay means any minimum gap can by okay if the glass is not touching each other, thank u for confirmation may u have a great day man! I'm happy that i was not doing wrong just making gap little which i more hehe, hope try this injection one day 💙 btw last question is placement of glass really matters, like some place all sides on bottom, some just sides on bottom, some all not one bottom 🤔 which is strongest and most safe one? I thinking to trying some new method so.....

@LEOPAZZOPRODUCTIONS Год назад

@@ItzAzAM28 I place all front and back and both side glass panels around the bottom glass. None of the front or back and side glass sit on top of bottom glass.

@AsgharAli-jo8gf 6 лет назад

The injection method was good. But there's shouldn't be so much gap between the glasses like the size of tooth pick and all the four panel sits on the bottom glass which is the base and not outside. I'm an aquarist myself and all the aquariums I have made don't have so much gaps.

@LeoPazzo 6 лет назад

+Asghar Ali interesting , feel free to email me to discuss further. Thanks for your feedback, leopazzo85@gmail.com

@dominickguevarra8033 5 лет назад

I think gaps will not be a problem for you use silicone gasket for that and i think this is much better than work than other procedures that i saw this much nice good and cleaner. That gap is the reason why its called injection!

@winzikh 5 лет назад

Hi boss. I like this injection method and planning to build my own.. Can you pls help me share your measurements in millimeter for all (5pcs glass panels) i will using 10mm glass for (4ft x 2ft x 2ft) tank. Thanking you in advance

@PhantomMods4 3 года назад

Hello, may i ask how did you maintain the bottom gap?

@LeoPazzo 3 года назад

Hello. The bottom gap is maintained by the weight of the glass itself. Before applying the silicone. You have to align the glass and space it out accordingly. The weight of the side panels of glass holds its position at the bottom. It is at the google where you need to use the metal clamps to hold the top corners in place. The gap at the bottom should be the same size gap as the sides. Hope this helps - 💪

@PhantomMods4 3 года назад

@@LeoPazzo I mean like where the bottom seal goes. I’ve heard the weight of the glass will squeeze the silicone out.

@LeoPazzo 3 года назад

Nooooo you Do Not put the side panels on top of the bottom glass. You put the side panels BESIDE the bottom panel. Watch the video again and look closely when I’m injecting the silicone. You can see the side panels are NOT resting on the bottom panel. Hope this makes it clear for you .

@PhantomMods4 3 года назад

@@LeoPazzo I see. Unfortunately with marineland tanks, the glass is ontop and it wouldn’t work with the frame. Thank you anyways!

@786davidjones 4 года назад

how thick should the glass be if the tank were rimless and braceless?.......and you should prob wear a cape #HERO

@LeoPazzo 4 года назад

Hahaha thanks man. In that tank build I’d suggest going with 3/4” glass all the way around. Or you can go with 3/4” at the bottom and 5/8 around all sides.

@Augie090 4 года назад

Where can I get those clamps, or what are they called if anyone knows?

@LeoPazzo 4 года назад

Augie090 hey Augie you can buy them from your hardware store. 90 degree clamps. Screenshot the picture of the clamps on your phone from the video and take that to the store and ask them if they have them. Cheers

@Augie090 4 года назад

@@LeoPazzo thank you. I had thought of doing the same thing. 👍

@moderngunguy3666 5 лет назад

This guys going through here and liking all the comments but not answering any of the questions LOL... you would have a lot more return viewers if you were answering questions

@LeoPazzo 4 года назад

Hey looks like it’s your lucky day. I have the time today to reply to comments and I am now coming across your comment . What questions do you have ? Did I miss your previous comment ? What would you like to know? Sorry for the delay reply . I have been busy with many other projects and replying may take some time. My email is usually in the video description. Cheers tlk soon

@moderngunguy3666 4 года назад

LEOPAZZO TV I don’t believe I had any specific question I was just noticing that a lot of people were asking questions and you were liking their comments but not answering the questions.. and some of their questions I was also curious about..

@LeoPazzo 4 года назад

Modern gun guy sounds good no problem thanks for tuning in- see ya on the next video

@awmarenthlei 6 лет назад

am i seeing mixed freshwater and marine fishes on your existing tank?

@LeoPazzo 4 года назад

Lalrinawma Renthlei no they are all saltwater fish - marine fish. Those large fish look similar to some freshwater fish but they are all saltwater fish and corals Cheered see ya on the next video

@jayveralcontin3488 3 года назад

Whats the name of that black angular holder?

@LeoPazzo 3 года назад

It’s called a 90 degree right angle clamp

@jho369 5 лет назад

How do you setup the gap for the bottom?

@LeoPazzo 4 года назад

Sparth space out the bottom the same way as the sides . The weight of be glass holds its position

@jepuskar 4 года назад

@@LeoPazzo Hi, just came across this video and this is exactly what I want to do. Can you elaborate a little more on that gap between the bottom panel and the sides? Are you saying the 90 degree clamps on the top will hold the gap space at the bottom? I saw a video of a professional tank company doing this method and they have little nubs built into the glass to maintain that space..so I'm just curious. Thanks for the awesome video.

@ImAwdheshShukla 4 года назад

@@jepuskar I'm reading all of the comments and can say that the side glass are not resting on the base glass. Side glass are at floor level and that's how gap is same between side and bottom.

@bigk6256 6 лет назад

Where do you get the glass from?

@LeoPazzo 4 года назад

My local glass supplier

@eleezakaine3028 5 лет назад

Omg I just like your video and now it’s a 666 💀

@LeoPazzo 4 года назад

Wow wtf what do you mean ? Oh that many likes ? Hahahahaha cool ❤️

@palomacordero985 2 года назад

Where you get the glass and what’s called

@LEOPAZZOPRODUCTIONS Год назад

Non tempered glass. Bought it from local glass supplier

@ashusingh3501 5 лет назад

what are the sizes of glass panels

@LeoPazzo 4 года назад

Ashu Singh see my other videos to this tank build. I have a playlist that has many videos with lots of info

@rajakrs2938 6 лет назад

While making New 4 feet glass Aquarium. How many times should we apply silicon coating for whole tank? What will happen if we apply second round silicon coating above first dry silicon coating after 24 hours

@LEOPAZZOPRODUCTIONS 2 года назад

You only apply silicone 1 time. Silicone doesn’t stick to silicone.

@1toastandjam1 Год назад

That’s why I don’t understand a tank manufacturer using silicone spacers as you say wet silicone doesn’t stick to cured silicone.

@LeoPazzo Год назад

Good observation. My guess is that the spacer is a hard plastic or material that will adhere to silicone

@1toastandjam1 Год назад

@@LeoPazzo my concern is that the spacer “ hard plastic or what ever creates a weak spot for potential water to get through. I realize that there is a layer of silicone over it as well when you do the inside and apparently it works but still! Maybe I’m just over thinking this but supporting the glass from above and having one continuous gap free seal makes me sleep better at night.

@LeoPazzo Год назад

@@1toastandjam1 totally makes sense what you are saying.

@vijaykorvekar1009 2 года назад

What is the thickness of the glass and the dimensions of the tank

@LeoPazzo 2 года назад

Thickness of glass is 12mm. Dimensions are 48x24x24

@josaphe 5 лет назад

dont show how to glue the bottom glass ..How to maintain gap between bottom glass and side glass.

@PhantomMods4 3 года назад

Still interested in this 2 years later.

@LeoPazzo 2 месяца назад

The weight of the glass maintains the gap.

@LeoPazzo 2 месяца назад

@@PhantomMods4 The weight of the glass maintains the gap.

@manqobamagawu225 4 года назад

Caption should be "how to save silicone "

@LeoPazzo 4 года назад

Manqoba Magawu hahahaha yea maybe your right. That a good thing or what? Lol

@besoklibur6978 6 лет назад

Can you tell me the dimensions for each glass?

@habbakuks1 5 лет назад

I believe that is .5 or half inch

@milanmondal1941 6 лет назад

What is the thickness of the glass

@LeoPazzo 4 года назад

milan mondal the glass is 1/2 inch think. Which is 12mm thick -

@nathanielbrown8312 2 года назад

Where can you buy them?

@LeoPazzo 2 года назад

I bought my clamps from home hardware store

@seperego1 7 лет назад

Hey man, how did you make sure that the bottom panel didn't stick to the drop cloth the tank was sitting on?

@JulianaSuperChannel 7 лет назад

Ethan Peregoy great question. The tank and silicone actually DID stick to the drop cloth. And to be honest this was intended. And I'll explain why. The drop cloth is easy to peel off from the tank bottom glass and silicone. In a previous build I used just a sheet of 3/4" plywood and had the tank glass directly on top of plywood . But when I was ready to remove the tank from the plywood the silicone was really stuck to the silicone and was hard to remove the plywood. That's why this time around. I still used the plywood as my solid straight and level base that I can easily shim if need to make level and flat if needed. From there I laid down the drop cloth nice and flat with no creases or seams overlapping. As it is very important to have the bottom pane of glass to sit flat and level in each direction, front to back and left to right. Once drop cloth was positioned, I placed the bottom pane of glass in place, on top the drop cloth. So all in all. Once silicone was dry for over 1 week I tilted the tank on its side and started to peel back the drop cloth slowly and observing the silicone that it was not being damaged or effected. And from my experience in this tank build, peeling back the drop cloth from the dry silicone was no issue and didn't effect the silicone and rip it out. Pretty straight forward. Again great question Ethan. I appreciate you tuning in. How's your tank going?

@LeoPazzo 7 лет назад

Ethan Peregoy hey Ethan sorry bud. The comment by Juliana super channel is from me but from my daughters RU-vid channel. I didn't realize that I was signed in to her channel. Thanks again and I apology for the confusion. But what I wrote is true and was written by myself. Lol under her channel name. My bad Cheers. How's the tank?

@seperego1 7 лет назад

Juliana Super Channel hey no prob, yea I wondered if it would stick too much or not, good to know. Thanks ✌️