How to Build a Hanging Porch Swing Bed -- {Twin OR Crib Size!} 

This video is sponsored by SkillShare. The first 1,000 people to use this link will receive a 1-month free membership to Skillshare Premium: skl.sh/sharawoodshopdiaries07211
In this video, I'll show you how to build a DIY porch swing bed! I'm sharing printable building plans below for both a TWIN and a CRIB size mattress swing bed in this design. So, let's get building!
Check out the step by step tutorial and plans here:
www.woodshopdiaries.com/diy-p...
Check out the printable plans here: woodshop-diaries.myshopify.co...
This project was pretty simple and only required a few tools and some basic power saws to make the cuts. It also used all standard and easily accessible lumber to keep things easy.
One thing to note: I used untreated wood for this project since it was going to be under a large covered porch and won't be affected much by sun and/or rain. However, treated, cedar, or another more weather resistant option is recommended if yours will be exposed to the elements.
Some posts you may find helpful to check out before starting this project:
How to Make 2x2s from 2x4s: www.woodshopdiaries.com/woodw...
How to Use a Pocket Hole Jig: www.woodshopdiaries.com/how-t...
How to Cut Plywood Sheets: www.woodshopdiaries.com/cut-d...
*Keep in mind this project is to be replicated at your own risk. Since this will be installed in a ceiling, make sure you are confident that your application and hardware can hold the weight of both the swing and the people who will be in it.
The following contains affiliate links.
ROPE KIT USED HERE: amzn.to/3qDhqEB
Tools and Materials:
Tools:
Drill/Driver: homedepot.sjv.io/9Wg2r0
Saw to cut straight lines--Can use miter, jig, or circular saw
Pocket Hole Jig (optional): amzn.to/363mFnp
Saw to cut plywood (see step 7)--Can use jig or circular saw
Nail Gun (can use screws instead if you don't have one): homedepot.sjv.io/vn2RJv
3/4" spade, hole saw, or forstener drill bit: homedepot.sjv.io/zajLor
Materials:
*Materials will vary based on the size porch swing bed you're building. Check printable plans below for specifics on each size. The following is based off a twin size.
(2) 2x2x8 boards: homedepot.sjv.io/YgdQeP
(6) 2x4x10 boards: homedepot.sjv.io/a1KaMR
(2) 2x6x8 boards: homedepot.sjv.io/e4Ro1D
(5) 1x4x8 boards: homedepot.sjv.io/n5BOV
(1) 1x6x8 board: homedepot.sjv.io/gboZxA
(1) sheet 1/2" or 3/4" plywood (optional): homedepot.sjv.io/9rR95
1 1/4", 2", 2 1/2", 3" wood screws (use exterior rated if using outdoors)
2 1/2" pocket hole screws (use exterior rated if using outdoors): amzn.to/3x9JPEQ
Timber Screws (optional): homedepot.sjv.io/x9JJO5
Wood Glue
(4) eye screws: amzn.to/2UhsD1m
(4) carabiner clips: amzn.to/3AhOrdM

Хобби