How to Build a Hipped Roof, Proper Job

Подписаться 641 тыс.

Просмотров 108 тыс.

50% 1

Tracer Deep Hole Construction Pencil
🛒 amzn.to/43zTSmA
Dan's Roofing Square & App:
🛒 www.essential-...
ForgeFast Timber Fixing Screws:
🛒 amzn.to/41TxHaR
Purchase the Delta Pro from the EcoFlow official website:
🛒 uk.ecoflow.com...
Roger and Dan demonstrate how to calculate and build a hipped roof.
A hipped roof is sloped on all four sides, while other roofs may only have two sides that slope.
A hipped roof is more stable against wind and snow and aesthetically pleasing.
The sides of a hipped roof are usually at the same angle but can also be varied for a more unique look.
=============================
#DanCox #roofing #woodworking #carpentry
🔗 Skill Builder Link Tree: linktr.ee/skil...
👍 Tell us what you like: skill-builder.u...
📪 Ask Skill Builder: skill-builder.u...
🎥 TikTok: / skillbuilder
📖 Facebook: / skillbuilderchannel
📷 Instagram: / skill_builder
🛒 As an Amazon Associate, we earn from qualifying purchases
🎬 All videos: www.youtube.co...
💧 We Support Charity Water: www.charitywat...
◾ Out of respect to our channel sponsors and the wide variety of people who watch our videos, we'll remove comments that do not follow common standards of politeness and decency.
✅ ▶ ⏩ 🔘 ⚫

Опубликовано:

25 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 192

@tomwills2309 Год назад

I learned hipped roofing on my level 3 diploma course at college 6 years ago. Working out the hip and jacks always confused me as we were taught with a geometric drawing with a compass and 3 bevels. I’ve watched all Robin’s roofing videos and not taking away anything from Robin as his a great carpenter but explaining how he works it out confused me aswell. This is the first video that actually made sense to me to the point where Dan has explained how to do it practically with simple explanation to the point where this has all just “clicked” in my head with roofing. It’s made that much sense that the next roofing job that comes along I’d be confident to take it on and not shy away from working out the hips and jacks. Thank you Dan!

@Ultimate-roofing-square. Год назад

That’s great to hear Tom. Sometimes you just need that explanation to make it click. Happy roofing! Dan.

@SkillBuilder Год назад

Hi Tom We produced this video with Dan in response to comments on previous videos we have made on the same subject. It was clear from the comments that we needed to slow it down and go over the points in more detail. I am so glad it has done the trick, it is a great moment when you get something, that lightbulb moment is what makes it all worthwhile. It is well worth watching Dan's playlist because he has really covered all the key aspects of roof construction now.

@kellypeters1734 Год назад

I am fully impressed! It’s just a complete ru-vid.comUgkxGqOCINHE0Z0E5gxzSdNi9NWGugRY5Hm2 plan with the best resources and step by step instructions . These shed plans are so satisfying as if the sheds build themselves on their own. Worthy work Ryan!

@Harry-nc7zi Год назад

By far the best and easiest explanation, no need for a maths degree just common sense 👍

@theyard6958 5 месяцев назад

Thank you for this. The video was very informative and clear. it answered many of my questions, as well as showed me other things I hadn't even thought of. From the Pacific North West, I thank You!

@elliejake11 Год назад

Love a roof video, as a builder I always look forward to the roof construction, every days a school day when Dan’s about. Cheers lads 👍

@marktyler9464 Год назад

the clearest explanation I've ever seen . Well impressed by you guys . ps your square is superb. thanks both

@SkillBuilder Год назад

Thank you Mark, that is what we were aiming for.

@Pilgrim-SG9392 Год назад

@@SkillBuilder Great video and the square looks really useful, where can I buy one?

@peadaroloughlin3270 Год назад

@@Pilgrim-SG9392 There's a link in the video description when you click on 'show more'...

@montedaestrada3563 Год назад

Roger! What a fabulous video with another Master of his Craft. There are so many subtle gems of information within it. I will definitely be watching more of Dan's videos. His angle tool is amazing. I hope he has it patented.

@SkillBuilder Год назад

I am glad you picked up on those gems.

@papaherms63 Год назад

I didn’t understand any of that but it was fascinating. Cracking job lads

@CORRIGEEN71 Год назад

Great video roofing is simple if the wall plates are square

@denty32 Год назад

Great video Dan and Rodger 👏👏

@Ultimate-roofing-square. Год назад

Thanks Mark.

@DavidWinstanley-e8y Год назад

Just built a garden building using this method, amazing tool, all cuts bang on 🙌

@briantrueman3505 Год назад

Top lad Dan ‘ Roger has got some great mates brilliant watch keep the great work/videos coming 👍👍😘

@LeeTillbury Год назад

Good work Daniel 👍🏻

@marlowjoinery9783 Год назад

Having the hip degrees already worked out is a great feature on this square

@nickhickson8738 Год назад

Fascinating. Two brilliant blokes.

@barnescarpentryservicesuk2811 Год назад

Lovely job lads ❤

@Ultimate-roofing-square. Год назад

Thanks Andy.

@liamgibbons2117 Год назад

Just a phenomenal video with perfect information.

@SkillBuilder Год назад

Glad you liked it

@mitchmix999 Год назад

Excellent video

@SkillBuilder Год назад

Thank you very much! We hope it does well

@thetallcarpenter Год назад

A great, simply explained and easy to follow masterclass on how to mark and cut in hips and jack rafters👍It's videos like these that are really going to help people wanting learn more about this aspect of roofing carpentry👊 It's just a shame all those sweet joints have to be taken down😢

@Ultimate-roofing-square. Год назад

Thanks Del. 🤝

@thetallcarpenter Год назад

@@Ultimate-roofing-square. 👍😎

@amazing451 Год назад

Childs play all that to you Dan, great job and ps, I'd created my own playlist for all your tips and videos long ago. Hope your back soon. 👏👏👏

@Ultimate-roofing-square. Год назад

Thanks Kevin.

@ABRAHAMODEKE Год назад

Great work

@peterdavies9277 Год назад

Never built a roof and never will. Strictly low level DIY for me but I found that fascinating. Skill - hard to define but easy to recognise. Nice one!

@SkillBuilder Год назад

Glad you enjoyed it!

@JamesOStanworth-Wang Год назад

Roger - you have a talent for explaining step by step. In a lot of these type of videos folks rush over things -- I guess because they are so used to doing it everyday. Simple, key details get over looked that way.

@SkillBuilder Год назад

Hi James I am glad that you can see what is going on here. Daniel is good but, like all tradesmen, he could lose his audience by not explaining things. I did a teacher training course many years ago with the intention of teaching at colleges if ill health prevented me being out on the tools. Thankfully it didn't happen but it came in handy on this channel.

@JamesOStanworth-Wang Год назад

@@SkillBuilder A couple of quick specifics from this video: first, the common rafter length you calculate overhangs the building -- but by how much? and second (sorry I probably missed this) how do you calculate where to cut the bird's mouth? Thanks again. I get the feeling there is something here for everyone from the DIY enthusiast, like me, who is trying to work out the basics through to the professional who can pick up a few extra tips from their collaagues.

@mikeeh20 Год назад

Great video clear and informative massive respect Mikee

@PhilipSaunders-o5f 4 месяца назад

Hi Dan and Rodger I’ve been in the trade for many years general carpentry but have over the years fitted a few roofs trusses and cut and pitched,loved your vids so much bought Dans roofing square as I have a small roofing job coming up very pleased when it arrived but like many carpenter thought I could improve it (oh dear ) so noticing that you used a clamp to secure rafter ready for cutting I thought why not drill and countersink a couple of holes so I could use screws for the same result; that I’ve done so will see ! Keep the vids going Phil.

@markellwood4132 Год назад

I wish I had this resource years ago. Teachers at school were never interested. Thanks

@benfurbank Год назад

I'm teaching guys how to do this and I like the way you've shown this and will try to keep it as simple and practical for the guys.

@SkillBuilder Год назад

Glad it was helpful!

@ianowens1577 Год назад

Dan's da man! Good job mate.

@self-preservationsociety7057 Год назад

You two are talented craftsmen , and make cracking videos too . Cheers lads

@SkillBuilder Год назад

One talented craftsman and one getting in the way

@Ultimate-roofing-square. Год назад

@@SkillBuilder 😬

@self-preservationsociety7057 Год назад

@@SkillBuilder see you on the next one

@Doug.... Год назад

Nice one Dan. I actually understood that. 👍👍

@SkillBuilder Год назад

Good to hear! That was the aim, I think Dylan's graphics helped a lot

@DeeJayCoolio День назад

@@SkillBuilder The graphic really elevated the video. It was the perfect visualisation for what you were explaining.

@lukekovacs-hoy1651 11 месяцев назад

Am a joiner thats never covered roofing when serving my time this helped today when i had to do my first hipped roof 👍

@dominicfrench6708 Год назад

I’ve alway been impressed by roof builders, love the content, need to watch this 10 more times

@manayconstruction5861 Год назад

Just used forgefast fixings yesterday, one of the boxes was 6 short.....now i know where the other 6 are😁. Top informative video as ever gents👍👍👍🔱🔱🔱.

@tonynolan6334 Год назад

I want to build a hipped roof on my summer house project at a 30 degree pitch. The perfect video. Just wish you went on to do plumb and seat cuts!! Great vid lads!!

@SkillBuilder Год назад

That is all in the previous video where we started with a simple up and over. Dan has lots of videos on our channel ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-OSDUZPV8GB0.html

@s.wilson5675 Год назад

Artists at work. Well done guys!

@agrennan5411 Год назад

Thanks been watching lots of your roofing videos I found this one very helpful with the animations hopefully after a few watches will take this in I've only been taught how to install trusses when it comes to roofing

@adrianaosirish6065 Год назад

Great stuff !!

@Ultimate-roofing-square. Год назад

Thanks Adrian.

@lazylad8544 Год назад

Good advice about the 600 Centres. And the isolation value. Thanks. Good video. I knew Rodger wanted to be a wood spoiler all along.

@matthewmurphy750 Год назад

Top class thanks lads

@Sebastian-iw5et Год назад

Great video guys! very informative and a joy to watch. i was wondering; are you guys planning any more instructions like this for different types of roofs? like half hipped roof, and perhaps valleys?

@SkillBuilder Год назад

We are open to suggestions. All the time we have the rig we can do these in detail videos without the pressure of a customer wondering why we have turned their building site into a movie set. There are some good videos coming up with Dan.

@SJWardBuilders Год назад

Fantastic video Dan and Rodger with great illustrations! Dan I've received my square and id like to tell you and any one else that's reading this just how good it is!!!! If you are interested in Dans square its worth its weight in gold!! Don't take my word for it try it for yourselves

@mrsbradpittiful Год назад

Roger had a great technique where he shows how it flops about

@issachunt7578 11 месяцев назад

Thanks boys, I don’t do many roofs! But I always over complete things, you make is so simple. Thank you so much for sharing…👍

@KG6AFF 7 месяцев назад

Excellent! Love the proper English accents, great coverage very instructional, thank you for teaching everyone! ... the cm comparisons will come in handy while I'm living and building in Hungary after living 40y in California (Oregon) ... and then was merely a little interested in building NOW im very interested in creating a few geodesic dome and octagon small buildings starting out and practicing on small and later using what I learned to build large house sizes. of the same.. all these tips are excellent and very helpful, along with 2 years of wood shop in Paradise Ca high school... 1987... -tibor

@bloggs692413 9 месяцев назад

really helpful info on this taking actual measurements instead of all the different apps makes it alot easier to get a grip of thank you skill build

@martinbrice9802 Год назад

Dans class great video guys, would be great for you to show us another with valley rafters and lay boards 😃👍🏽 thanks guys really enjoy your content

@AndyCarnegie 7 месяцев назад

This was really well explained and made complete sense. Brilliant!

@keithbyrne7450 Год назад

Learned to do roofs using imperial inch rise rafter table and would find it hard to change but this is a very good way of doing it

@SkillBuilder Год назад

Dan has an American version of the square. It works the same way

@vinnysurti Год назад

Building Roger’s Doghouse for when the Mrs kicks him out 😂

@loafersheffield Год назад

Loafer lives in a detached garage, guarded by spiders. The missus is an arachnophobe.

@gdfggggg Год назад

Again

@MrJFoster1984 Год назад

🤣👍

@mikegriffiths3440 6 месяцев назад

Brilliant!

@MrJFoster1984 Год назад

Just a side not, collar ties and I think for the hip they are called king ties to stop spreading of the roof and potentially the walls? Can't recall as it has been many years since I have built a hand cut roof. Great video lads. Cheers Jerry

@stakkerhmnd Год назад

First comment and important comment. My mate, who works for the council, says he was very busy today working on a council house where the council tenant had broken the shower handset holder. It had snapped clean off. It looked like wear and tear had caused the failure rather than the council house tenant being heavy handed.

@princejude5469 8 месяцев назад

I have learned a lot here as an upcoming carpenter, thanks so much guys

@SkillBuilder 8 месяцев назад

Great to hear!

@waelah5554 6 месяцев назад

The best video on the subject

@koro287 10 месяцев назад

Hi Guys, i just screwed up my carport roof by following an american video that stated the seat cut for a hip rafter be lowered by half the thickness of the hips width. This made no sense,but he was a teacher of sorts and i bulldozed along and they of course were too low in relation to the commons. What a royal cock up! should have followed yours. Cheers.

@gordonmackenzie4512 Год назад

Like how you mention sheeting the roof with OSB or ply. That has been compulsory in building regs in Scotland for many many decades.

@SkillBuilder Год назад

I know it is a Scottish thing, due partly to the proximity of Sterling board. They say it is due to the higher exposure to strong winds but I wonder if it is something else.

@ladytradiej8027 Год назад

Awesome video!

@Musicalbluewolf666 Год назад

best video thanks

@kendodd8734 Год назад

Dan definitely knows his stuff although when ever I do roofs I use the scale down and scale up method but as they say there’s many ways to skin a cat

@Ultimate-roofing-square. Год назад

Thanks Ken. Yes, what ever way works for you best.

@lawncarewithtim4896 Год назад

Love your videos Roger and Dan. Roger how many bleedin cups of tea do you ave! Cheers from Australia.

@davidbruce5377 7 месяцев назад

Helpful indeed. Gents, would you entertain with a video on deck railing top plates with "Comfort slopes". The top plate is sloped 22 deg for resting on. The learning message is how you miter the outside and inside corners, with a 22 deg slope. Thanks for the consideration.

@SkillBuilder 7 месяцев назад

Great suggestion!

@davidbruce5377 7 месяцев назад

Thanks and hope to see your video on it.@@SkillBuilder

@ToraKwai Год назад

i love how dan seems to be using a different writing implement in every close up shot, that's why i keep 3 pencils on me all the time, if i leave one somewhere (as i often do) no has to sit and wait for me to go find it

@SkillBuilder Год назад

Roger is a pencil thief. Dan starts with three and finishes with none.

@ToraKwai Год назад

@@SkillBuilder there's always one about

@Ultimate-roofing-square. Год назад

@@SkillBuilder 😂

@ToraKwai Год назад

@Daniel Cox sounds like a good excuse to get one of those bungie strings for your pencils, also saves dropping them off a roof

@Ultimate-roofing-square. Год назад

@@ToraKwai good idea. I do like a few pencils close to hand.

@stephencracknell5077 Год назад

Great pitching Dan.. pity Rodger said you can use the square if you want or not, however, if I didn't use your square I wouldn't know the angle of the hip!! So it would be a great follow up video to show people how to find the pitch angle of the hip. Incidentally in Scotland your King common is our Crown rafter...go figure.

@SkillBuilder Год назад

Hi Stephen We get accused of disguising adverts as HOW TO's so I wanted people to understand that the information holds whether you use Dan's square or not. We don't drag people kicking and screaming to the cashpoint and it works well enough. Daniel had sold out again.

@gingergamer4563 Год назад

tan⁻¹(tan(P)÷√2) where P is the pitch of your equally pitched roof :) E.g tan⁻¹(tan(30)÷√2) = 22.21 rounded. The tall carpenter also has a practical way of doing it, pretty cool.

@TheStuG95 Год назад

Great video love watching Dan work on the roofs, just a question is the king common rafter exactly the same size as the common rafters? Keep up the good work!

@Ultimate-roofing-square. Год назад

Thanks for watching Stuart. Yes it is, as the ridge is the same thickness as the rafters the king is the same length as the commons.

@TheStuG95 Год назад

@@Ultimate-roofing-square. much appreciated Dan, was the perfect video to come up, only done a handful of roofs and got a hipped one coming up in a couple weeks so was a good refresher to the memory👏👏

@Ultimate-roofing-square. Год назад

@@TheStuG95 I hope it goes well for you.

@albieproduction Год назад

Great Demo, really informative. Can i ask, what Timber did you use for the hip roof?

@samsingh2042 Год назад

Hey Dan that t shirt looks the business, had a look on your website, and they are not available. Are they for sale yet.

@Ultimate-roofing-square. Год назад

Hi Sam, thanks. They are not however I could get some more printed. Keep a eye on my Facebook page.

@martindownward9253 2 месяца назад

Great video. I don't measure the hip length. I put the hip rafter in it's position with the plumb cut higher by the height over plate.(93mm in your case) Then from where it strikes the wallpate i plumb it up and level the seat cut, at 93mm above plate. So when it's cut it drops down perfectly into the correct position. Works great with long hips. Love the roofing square, how do I get one ? Many thanks

@SkillBuilder 2 месяца назад

Hi Martin I have used that method with Dan and it works well. The only downside it putting the long rafter up and then taking it down for cutting. Dan's square is available from www.essential-carpenter-tools.co.uk/store/p/ultimate-roofing-square-6975m

@ziel0k5 Год назад

Always wanted to test this by myself, great job 👍 Can you explain why you make that "arc" line, instead of measuring from the top -> square line down and then mark the birdsmouth?

@Ultimate-roofing-square. Год назад

Hi Robin, as it’s 2 fixed points , ridge and wall plate there’s no need to measure along the top of rafter.

@ziel0k5 Год назад

Ok, thanks. And how do you determine the angle of 30 degrees.? Did you calculate this, or did you choose this by yourself?

@Ultimate-roofing-square. Год назад

@@ziel0k5 if you watch the previous roofing video you can see how how we decided on the pitch. Thanks for watching.

@jackstally7861 Год назад

Am I right in saying the size off the hip rafter’s and the ridge be half the size again of the common rafter.

@Ultimate-roofing-square. Год назад

The sizes are usually worked out by a structural engineer.

@Jimbo-rk7tx Год назад

Love these videos. Could you do one on irregular hips? 👍🏻👍🏻

@SkillBuilder Год назад

We have one

@tesorotesoro1654 5 месяцев назад

Hi mate ,can you explain why you said you would need a thicker batten on this video ,thanks.. can't get my head arout that .👍

@michaelfraser5723 Год назад

Good skills; bizarre trousers

@paulrumbold2436 Год назад

Mmmm the run is not the span ? The run is half the span . The end rafter as I taught is the CROWN rafter ( in Hampshire ) . Maybe different in Essex ? Whatever , we still can’t get paid enough? Keep up the good work .

@lukeh3020 Год назад

Is there any benefit of hipped roofs, other than less brickwork? I always liked the look of gable walls and they give more space in the loft, but maybe I'm missing something.

@steveshaw9254 Год назад

Hi sorry I'm replying to the wrong video When you drill your damp rods in is there a certain height they go in as the pavement on the front of our house is higher than our floor level in the house Thanks Steve

@lordpickle8424 18 дней назад

"Don't forget that .5 of a millimeter", lol. I'm in Canada where we have to use both imperial and metric, half a mm is like 1/64 of an inch.

@patconnelify Год назад

Will you be on the dragons den to market that new square ? Should Sell itself. Amazing videos 🤙

@jaser461986 Год назад

Hi guys, is the end king common the exact same length as the commons ?

@redx11x Год назад

Why do we use screws in the UK, when in America they use nails. I heard they said nails allow for more flex of the roof. Can someone let me know which is better

@bungleford Год назад

Nails do have more flex than standard wood screws. It's also a lot quicker to use a nail gun than it is to put in screws. I think Roger is using screws for this so that it can be dismantled.

@gdfggggg Год назад

@@bungleford 👍🏻

@Simon78 Год назад

Wizardry!

@jamestowsey5821 Год назад

I was taught to not drop the hip rafter down from the plane of the common rafters like Dan has here. Rather to keep the hip up on plane with the other rafters and cut or plane the dihedral angle onto the hip afterwards. I don't think strength wise it makes alot of difference though.

@GeorgeOBrien-kt9wf Год назад

Hi guys, could you explain how you found the ridge height and length?

@SkillBuilder Год назад

Hi George Try this one ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-xsMydhhl7ao.html

@johnchincotta1qwdb15 Год назад

In the USA imperial dimensions are still used

@SkillBuilder Год назад

That is why we mention them. We have many American viewers who struggle with the metric measurements. Dan also has an American Rise over Run version of his square

@johnchincotta1qwdb15 Год назад

@@SkillBuilder yes they do.Roofing ratios in America are different .its per feet run. Eg a 6 12 pitch means that for every foot or 12" run it rises 6" and so forth. I am personally fully conversant with both metric and imperial units.Metric been the easiest to work with.

@BerkeleyTowers Год назад

Roof porn. Love it! A cut roof done well is a work of art....... And I hate to say it, but a dying skill. One observation about 600 centres that a chippy won't see unless they go on to do the roofing as well, is that you can get tremendous bounce on the battens. If you're slating the roof or using a plain tile and nailing every one, you really notice the difference in stiffness of 400 versus 600.

@SkillBuilder Год назад

Hi Paul I think 600mm centres are also bad for plasterboarding. I would always choose a 400 centres layout.

@johnclark9712 Год назад

Does anyone know the name or brand of Dans pencil he is using 👍🏻

@SkillBuilder Год назад

Hi John, it's the Tracer Deep Hole Construction Pencil - Here's our affiliate link: amzn.to/3NmUpCJ

@LaoZi2023 2 месяца назад

What is the name of the roofing square they are using?

@nonoyorbusness Год назад

I thought I'd seen this already.

@SkillBuilder Год назад

No you haven't. Spot the difference....Clue.........Hip

@nonoyorbusness Год назад

@@SkillBuilder Ah, well, OK, thanks!

@Aimsmallmiss 11 месяцев назад

What kind of square is that

@richardsekula3048 Год назад

what is the name of the cool square

@SkillBuilder Год назад

It is The Ultimate Roofing Square from Essential Carpenter Tools. The details are in the description

@scottmason8529 Год назад

Robin clevett vs dan cox. Who is better?

@Ultimate-roofing-square. Год назад

It’s no competition.. just a bit of fun roofing.

@SkillBuilder Год назад

Scott Mason How would anyone ever come up with the criteria to judge? Is it about speed or accuracy? Does a millimetre here or there, or a even few seconds make any difference? In the end it is about having a nice day filming the build. Hopefully that comes across in the video. If you haven't seen it I urge you to watch Dan's Oast House ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-2_LNrxL2gvE.html

@edthompson9337 Год назад

My money is on Dan, less talk and more action than Robin!

@scottmason8529 Год назад

@SkillBuilder thats pretty obvious isn't it - higher standard of workmanship, better industry knowledge, speed at getting the job done. Personally, I think they are both fantastic carpenters just though id see what other people opinions were.

@VATAN34BAYRAK Год назад

👍

@umefrank3078 Год назад

About the calculation of the measurements please can you demonstrate in metrics? not in FOOT measurements

@leer798 2 месяца назад

No dragon ties ?

@martinpanks992 4 месяца назад

Carnt beat roof trusses😂

@audid00dy Год назад

Fewer rafters, less cold bridging???

@SkillBuilder Год назад

Is there a question here?

@audid00dy Год назад

@@SkillBuilder Apologies if my question seemed like a statement!

@LaoZi2023 2 месяца назад

Why did they measure the birds mouth to the top of the hip roof? I'm not quite sure I understand that logic...

@retneprac Год назад

king sounds better lets just call it that

@SkillBuilder Год назад

I like Queen

@retneprac Год назад

@@SkillBuilder either sounds better than end common 😂

@davidbarclay6293 Год назад

I'm sure I have watched this before.

@SkillBuilder Год назад

You have not seen it. This is the hipped roof which is different to the gable end that we did a few weeks ago.

@davidbarclay6293 Год назад

@@SkillBuilder and that my friend is the reason why I'm stuck in an office. Should have paid more attention when watching the last video.

@dorothymartin8557 8 месяцев назад

Even better, DON'T build a hip roof. Build a stronger regular roof.

@Bigdoggobrien 2 месяца назад

Regular? What do you mean, like a gable? Or trusses

@Shaggy-8392 Год назад

Sick and tired of cowboy builders in southend. We need regulation to control who can do work or not now and several punishment for lea ing customers in vulnerable positions such as no heating, water secure, electric certified etc.

@andywarwick2342 Год назад

🤣Just heard you on GB "news".............stick to the DIY tips......otherwise you will be accused of "using your voice" to forward your agenda like GL.

@SkillBuilder Год назад

Andy That is very good, do you think Skill Builder will sack me?

@andywarwick2342 Год назад

I do not have an opinion. Are you concerned for your continued employment ? Do you think the BBC will "sack" GL......?