How To Build a Rug Making Frame - Step by Step guide for Height Adjustable Tufting Setup

Подписаться 4,2 тыс.

Просмотров 192 тыс.

50% 1

In this video I show you how to assemble your own rug-making frame. This is a fairly comprehensive guide on how I've been making these - Since it's a piece of rug tufting / punch needle equipment that isn't available to purchase anywhere, I've been getting a lot of questions about it.
If you have any other questions I haven't answered here, or ideas on what I should make for my first giant rug on this frame, please comment them below! I'll do my best to answer everything.
Wood dimensions:
For the leg sections- two 3' tall for legs, two 2' long for feet, four 1' sections for leg support braces, cut on 45 degree angles, keep the triangle offcuts for support braces between the legs and the frame. The frame part can be any size you want. 4'x4' is easy to do because it's two standard 2x4's, but it depends on how big a rug you wanna make.
If you haven't yet, please Subscribe to the channel so you don't miss the next video.
www.youtube.com/@nofunstudio?...
Grab some No Fun® gear 🏴 nofun.xxx
Use Discount code RUGFRAME for 15% OFF your first order.
TikTok: / nofunpress
Instagram: / nofunpress
Get a 10% OFF new High CRI LED Shop Lighting from American Greenlights 💡
Use code "nofun" at www.americangreenlights.com
We installed these in our new studio space, they're great!
Find the part you're looking for:
0:00 - Intro
0:15 - Supplies you Need
0:57 - Pick your Size
1:41 - Assemble Frame
2:34 - Measure & Cut Leg Supports
3:10 - Plan Leg Supports
4:12 - Keep your Scraps!
4:37 - Assemble Leg Supports
6:17 - Putting it all Together
6:31 - Height Adjustment Explanation
7:20 - Attach the Legs & Adjustment Tips
8:05 - Stop the Wiggle!
8:54 - Adding Tack Strips
9:30 - Tack Strip Tips
10:28 - Yarn Holder
11:25 - Finished Frame
11:52 - Any Questions?

Хобби

Опубликовано:

29 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 205

@NoFunStudio 2 года назад

I'm so pumped that so many of y'all have been finding this video helpful! If you're on our webstore, please use code RUGFRAME for 15% OFF your first order 👍 nofun.xxx I also just added chapters to the video so that you can find what you need while you're building.

@nisagonzalez9123 2 года назад

How many ft long do the 2x4 need to be exactly ? Or it doesn’t matter ?

@NoFunStudio 2 года назад

@@nisagonzalez9123 Which part of the frame do you mean? The entire thing is made of 2x4's...

@lindamon5101 2 года назад

Please could you help me figure out greek flokatis are made, ive searched for yrs, ima dumpster diver too✊🐑thankyou for this

@judahmiddel 3 года назад

there is literally no better content than this. i want my entire wardrobe to be no fun if it means financially supporting videos like this. (it's only like 25% no fun at this point)

@NoFunStudio 3 года назад

Thanks dude!! You know where to find that gear ;) I'm working on designing the Spring apparel drop now that I'm finished building this thing.

@maddiegtaylor 3 года назад

i love how he takes the extra time to build the legs separately but refuses to drill pilot holes LOL

@NoFunStudio 3 года назад

I enjoy making the rugs! Pilot holes... not so much ¯\_(ツ)_/¯

@michealkinney6205 3 года назад

Just food for thought, but he built the legs separately so that they could be adjusted.

@zaydroberts2643 3 года назад

Do you have to use monks cloth or u could use brown cotton cloth

@michealkinney6205 3 года назад

@@zaydroberts2643 I've been using Burlap, which is much much cheaper than monks cloth, with no real issues.

@ReptardGaming 3 года назад

I died at “no problem…” next scene, “this is where my problems began”

@longboarderebright 3 года назад

i put the L shaped shelf brackets on my frame and it was super easy and extremely strong! helps for not cutting those angled pieces

@iantorhys 2 года назад

Well done video - gives all the information needed with style and humor. Thanks for taking the time to teach!

@NoFunStudio 2 года назад

Thanks Keith! I'm glad it's workin' for ya- more videos to come shortly!

@Fernyharo Год назад

Bro I based mine out of this one, thank you so much for the detailed explanation and even putting the dimensions in the description truly appreciate it!! I did my frame 4x4 but man does it look awesome!!

@NoFunStudio Год назад

Hell yeah, I'm happy it helped!! 🙌

@manlymcstud8588 3 года назад

probably the best frame video i've seen, and i've seen 'em all from the beginning of time to ones made in the future.

@NoFunStudio 3 года назад

Thanks, I really appreciate it!!

@manlymcstud8588 3 года назад

@@NoFunStudio i've watched a lot of 'em, and my conclusion based on the comments is that our educational system *really* needs to reinstate shop class.

@NoFunStudio 3 года назад

@@manlymcstud8588 As someone who never got to take shop class... I agree.

@martjassir 2 года назад

Awesome construction and your detailed explanation makes it so easy to follow. Also I subscribed ;)

@NoFunStudio 2 года назад

Thanks Martha!!

@kariec3197 Год назад

Thank you! I bumped into this gladly and enjoyed your fun personality. REAL ness. ;-) Looking forward to watching more of your videos. Bless you all!

@NoFunStudio Год назад

Thanks Karie!! I'm glad you liked the video- more on the way soon, just gotta find some time to edit :)

@ilspeth99 Год назад

I swear, you are my carpentry spirit animal. Pilot holes? We don't need no stinkin pilot holes! This is awesome. In one lucky click, I found exactly what I needed to build my first rug frame. Thank you for putting this together for idiots like me!

@NoFunStudio Год назад

From one idiot to another, I'm happy this helped!! 😅

@avrillavene5734 2 года назад

Thanks so much! This was so helpful. Very thorough tutorial

@NoFunStudio 2 года назад

Glad it was helpful! 🤘

@kionawatson Год назад

The best tutorial video.. hands down.

@NoFunStudio Год назад

Thank you!! 🙌

@BigBlueD830 3 года назад

10:40, opening the eyehooks. This just saved me like an hour of time. I was dreading having to try to cut an opening with maybe a hacksaw or the metal cutting wheel on my dremel, and then all the filing and cleanup work to make it all smooth. After watching this, I gave them a few whacks with a hammer and a cold chisel and boom, open hooks in seconds, no cleanup necessary! Thank you!

@NoFunStudio 3 года назад

Glad to hear it! Sometimes brute force is the answer lol

@familiafranconaveas Год назад

I'm about to build this one for my mom, thanks a lot for the detailed explanation. Lotta love from Chile 🇨🇱.

@NoFunStudio Год назад

Awesome! I hope your mom gets a lot of use out of it!

@CookieSmut 3 года назад

I love that you have one of them Rae Dunn mugs....it's like the antithesis of your brand

@NoFunStudio 3 года назад

😅my girlfriend's mom got them for me for xmas one year, they're xl size, and the contrast is excellent hahah

@coleprice7858 3 года назад

Exactly the help I was looking for thanks

@NoFunStudio 3 года назад

Glad to hear it!!

@MakeForOthers 2 года назад

delightful and informative, thanks!

@NoFunStudio 2 года назад

No, no, thank YOU 🙏

@isaackarns385 2 года назад

really understood what tools i would need when he tossed them on the ground. i felt that

@ttj7343 4 месяца назад

This is the video ive been looking for.

@NoFunStudio 3 месяца назад

Hell yeah! If you have any questions let me know- I'm likely to shoot a part 2 of this rug frame video in the coming months

@OGJaquarPrincess 3 года назад

Perfect easy build

@NoFunStudio 3 года назад

Glad you like it

@BillieBlonka904 Месяц назад

Nice job

@tylerjameshq 18 дней назад

" I got all of his pre-cut wood for free out of the alleyway" lmfaoo has me rolling 😂😂💀

@JamesG571 Год назад

great video on making a rug tufting frame. Just a thought instead of using screws for the legs; what about drilling holes in the legs and frame and using bolts with wing nuts, so when you need to raise or lower the frame just loosen the wingnuts and take the bolt out and move them to where the need to be and not have to worry about screwing and unscrewing the screws all the time.

@NoFunStudio Год назад

This would absolutely be a good solution! I built this frame during the first major lockdown & couldn't actually go to a store to buy bolts or anything, so I was using what was on hand. I do always have the screwdriver around, so unscrewing works for me- But bolt/wingnuts would work if you've got em.

@dg2k733 Год назад

this ^^^

@narsi2k440 3 года назад

this video is going to get millions of views, i promise

@NoFunStudio 3 года назад

I hope you're right 😅

@hellcatno392 3 года назад

posted on my birthday this is a sign I need to get in this business lol

@NoFunStudio 3 года назад

Do it!! Happy Birthday!

@travhatestrav1729 2 года назад

this was my step by step building this

@NoFunStudio 2 года назад

heck ya!! love to hear it, hope yours turned out sweet

@devken 2 года назад

SO entertaining.

@hnin.studio 3 года назад

LOVE IIIIIIIIIT and need that measuring tape asap

@NoFunStudio 3 года назад

Thanks! we've still got a pile of em left on our shop 📏

@georginaparejo7054 2 года назад

Gracias por ser tan buen maestro y por servir hermoso

@NoFunStudio 2 года назад

Encantado de ayudar!

@marshelindra1714 Год назад

HELL YEAH!

@abbizwiesler520 Год назад

great video! how many 2x4’s did you use?

@ShePlaysSixStrings 3 года назад

Thanks this is bomb

@NoFunStudio 3 года назад

Happy to help!

@blessed2presscreations795 2 года назад

You are a true blessing to newbies. I am just zbout to get started tufting, and would like to make a 3ft.x3ft collapsible frame because I work as a travel medical professional. Can you show how to make a small frame foldable or able to be disassembled and reassembled for travel ease? Thanks either way.

@NoFunStudio 2 года назад

I'm in the process of moving into a smaller space, so I think a smaller frame would probably be a good idea- I'll add it to the list! 🙏

@SWANSONBOTTLEHEAD 2 года назад

Great video! you should get an automatic center punch. The amount of time you save not having to tap the awl really adds up. best $12 I've ever spent

@SWANSONBOTTLEHEAD 2 года назад

also very well played finding all that free material

@NoFunStudio 2 года назад

I do have one of these actually for metal, don't know why it's never occurred to use it on wood. In this case however- Hammering the awl did make a deeper "pilot hole" than I think the center punch would have ¯\_(ツ)_/¯

@Adam_11180 2 года назад

عمل رائع وجد سهل... 👍👍👍

@Schapaval 2 года назад

хорошо получилось👍 very nice 👍

@NoFunStudio 2 года назад

thank you! 🙌

@jessehardin8500 День назад

Protip always use star bit screws!!! Youll never have to worry about them stripping

@vondiggy21 3 года назад

I adore you lol

@DUBZILLAco Год назад

Followed your steps & built my first tufting frame, currently working on my first design! Thanks sokuch for your help!! Where did you get the blue back drop & what's it called exactly? Would be a huge help to make the mess easier to clean

@NoFunStudio Год назад

heck yeah! I love to hear it, good work! The blue backdrop is a paper backdrop for photography, called seamless paper - I got it at B&H photo, but you can order it from any photo or video shop/ or probably amazon. I just have it rolled out here to make the frame itself stand out in the video, so it's visually easier to see / blocks out all the clutter in the background of my studio. I don't have it rolled down while I'm actually working on a rug, seamless paper is way too expensive to use just as a dropcloth to catch yarn and glue on the floor. Butcher paper is probably a better bet for that! When I'm tufting I just sweep the floor as I go ¯\_(ツ)_/¯

@g..._anthony27 3 года назад

I love how you throw things... lol sh!t is crazy

@Dfronz 3 года назад

Very helpful. Where are you getting your yarn from in Toronto/ are you buying it on spools? Great stuff as always

@NoFunStudio 3 года назад

I try! Been stocking up on unspooled acrylic yarn from the big box craft stores whenever they're having a sale. If I'm buying wool or spooled yarn so far I've been going to Romni.

@stefanidimitriou60 2 года назад

hey nice work.! i want to ask where do you buy the product? can you suggest me some reliable one to buy :) thanks

@smileyface852 2 года назад

would you be able to make a tutorial on how you set up the fabric on your frame?

@NoFunStudio 2 года назад

I'll definitely try to show that in more detail when I'm editing my next couple rug videos. 👍

@diegodinero99 3 года назад

Cool video!! What were your dimensions you cut for each part of the frame?

@NoFunStudio 3 года назад

They're all listed in another comment on this video, but I'll throw 'em in the video description

@catherinemelnyk Год назад

It's great if you have a shop and power tools and a massive room to make rugs in...

@NoFunStudio Год назад

Fair! You're not the only one looking for an easier, more compact version- I'm planning on making a 'Part 2' of this build that incorporates everybody's questions & concerns from the comments here.

@beata2000 3 года назад

Love it, hope you don't have downstairs neighbors

@NoFunStudio 3 года назад

Its thick concrete floor in an old factory building. I'm sure the people downstairs are thankful for it lol, but it's all studios here so things with noise are a little more forgivable.

@Bibi.C. Год назад

Can you also build an adjustable frame? So that you can also use smaller towels. That would be really useful. Do you have an idea or tip for me?

@NoFunStudio Год назад

You can screw in an additional 2x4 or 2x2 with tacks into the inside of the frame to make a smaller area - I do this sometimes when I have offcuts of tufting cloth that are smaller than the frame's full size.

@glennramsey3471 Год назад

Highly recommend acoustic treatment in your space or at least some sort of mic shield isolator for use in all recording applications to tame the excessive audio reflections. Treatment in your space will make you life and audio quality better but the mic shield would be a minimal effort way to make your videos sound instantly better.

@NoFunStudio Год назад

We've moved out of this space, so that's taken care a lot of the audio issues honestly! I agree the audio is a bit of a nightmare in this video... I've been striving to make everything better each video so I really appreciate the tips, gonna implement next time we're shooting.

@kariec3197 Год назад

@@NoFunStudio I "listened" using the closed captions ---so it "sounded" great! ;-)

@figures718 3 года назад

Where's that alleyway? I wanna pick up a few things.

@NoFunStudio 3 года назад

There's an alleyway like this in every city, if you know where to look 🤘

@timothy92x 3 года назад

Can you please give me the measurements on the small pieces you used to help stabilized and keep frame from wiggling ? Thanks in advance, awesome video 🎯👌🏻

@timothy92x 3 года назад

Also how long are the screws you used in this video? Thanks again! 😎

@NoFunStudio 3 года назад

7.5" on the long side, but that's just because it was made from a scrap that was that side. The size of these pieces doesn't need to be exact, just so long as they're there & the frame is more stable.

@NoFunStudio 3 года назад

@@timothy92x you want 2.5" minimum, but longer if possible for a stronger connection on some parts of the frame and legs. Long enough to join the two pieces, but not so long it pokes out the other side. I filmed this during lockdown here & couldn't go to the hardware store, so I just built it using what I had on hand, which ended up being a jumble of different things.

@timothy92x 3 года назад

Thanks again! I was able to get all my pieces I needed to start building my 4’ x 4’ frame. Very much appreciated 🙏🏻😎

@NoFunStudio 3 года назад

@@timothy92x Pumped to hear it!!

@juu3135 2 года назад

Hi, I wonder know what's the difference I use between wood-bar with nails and rug hooking gripper strips? Thank you.

@NoFunStudio 2 года назад

I have only used the rug gripping strips - I wouldn't want to have to nail in hundreds of nails into the edge of a frame 1 by 1. The extra nail length might keep the tufting cloth on better, but would also make it harder to adjust while you're working. On future frames I might add 2 rows of the tack strips rather than just one like is shown in the video. I think that would still work better than doing all the nails individually.

@michealkinney6205 3 года назад

I like how he turned the whole frame around to move it and put it against the wall, when he could have just left it the direction it was and walked it the wall.. I do that kind of crap all the time, only to realize later, LOL

@NoFunStudio 3 года назад

I'm only realizing this now 😅

@comradethump Год назад

I have a question about frames in general and hope you can help. I am aboout to build my first frame and I am thinking go big so I dont need to worry about upgrading in the future my question is more about the rug making process itself. Lets say I make a frame that is 2mx2m giving me 4sqm of work space, if I only use lets say a quater of this space on a rug, can I think cut that rug out and still use the backing material left on the fframe or once cut is the backing more or less unusable? This might be a really stupid question and I am assuming you will want to complete everything on the backing material before making a cut to maintain the tightness of the backing material but I cant seem to see a question or answer about this in my limited searching. Thanks in advance.

@NoFunStudio Год назад

You're right - you don't want to cut anything off the frame before you're done tufting. You won't be able to tuft at all if the cloth you have stretched on your frame has a big hole - you need to surface tension in the fabric for the tufting to work. If you're going to fit more than one design onto your frame, do all your tufting first, then glue it all at the same time.

@comradethump Год назад

@@NoFunStudio thank you!

@Katiuskamatriuska Год назад

❤

@charlesdiatta7806 Год назад

What size screw should I use ?

@LittleYoki Год назад

Wow lucky find for the wood. I wouldn’t be throwing that stuff away.

@NoFunStudio Год назад

My neighbours are wood shops, so, I got lucky in that way - I'm happy to re-use their scraps.

@LittleYoki Год назад

@@NoFunStudio damn that’s awesome, I wish😭

@taracontreras4652 Год назад

Where do you buy fabric big enough for your frame?

@JasmineGoodenDisciple 2 года назад

What size is this?

@beautifflymade 3 года назад

Can you show how it is adjustable in height? Would you have to take all the screws out of the leg and re-drill?

@NoFunStudio 3 года назад

You dont have to take them all the way out, but yes- you just unscrew the legs, change the height, and tighten them back in. Its like 5 screws per leg, if you have a power driver it takes about a minute. I have another frame video coming out, I'll definitely include it.

@yaeyo9786 2 года назад

what size wood i need for legs

@CedarRapidsResident 2 года назад

Where do you put the yarn as it’s being fed through the hooks? Do I have to unroll all of my yarn to get it to unroll freely? I can’t seem to find many answers online

@NoFunStudio 2 года назад

Some balls of yarn you can pull the string out from the middle of the ball and it will feed freely for the most part. You can also get a yarn winder tool that unwinds it from a ball that doesn't feed freely and rolls it into a ball that will. Otherwise, yes, you're stuck kinda unrolling it into a pile on the floor underneath the hooks.

@ahmedmuhsenhaki6771 5 месяцев назад

Hi, How can i make similar background utility ?

@a_z-bruh 2 года назад

Tip: if you run your screw in reverse with some pressure for a bit before screwing, it helps prevent the wood from splitting. Ps it'll produce some smoke a little bit but that's normal. At least in my experience but it does seem to work.

@rosepadden249 2 года назад

Can you put pins in the legs to quickly change heights?

@NoFunStudio 2 года назад

Yeah, in theory I guess you could drill out a bunch of holes at different heights and then make a pin/dowel system for better quick change. I built this peak-lockdown when a lot of hardware stores here were not open, so I sort of had to use what I had on hand. I always have a screwdriver on hand so unscrewing it has never been a problem- but I will probably experiment with a better height adjustment system in the future, pins are a good idea, but might shake loose if implemented incorrectly.

@professorx350 3 года назад

Where do you purchase fabric large enough for this frame. I just made one that is 72” by 72” and am struggling to find fabric large enough for it

@NoFunStudio 3 года назад

on aliexpress theres a bunch of sellers who have it by the meter

@coleprice7858 3 года назад

@@NoFunStudio is there a certain seller from AliExpress you can link? I'm only finding tapestries can't seem to find the meters of cloth

@manlymcstud8588 3 года назад

@@coleprice7858 go there and ask for a guy named Hung Wong.

@4y6857 2 года назад

From a 71yo wood butcher: There's never enough time to do it right, but always enough time to do it again.

@NoFunStudio 2 года назад

Damn, if that ain't the truth... 😅

@jamilahalferdaws2649 8 месяцев назад

Share more videos

@NoFunStudio 6 месяцев назад

I'm in the midst of sorting thru a whole bunch of footage to edit, more videos soon!

@alyssamercer4400 3 года назад

Ugh the thing I miss most about Toronto is Pizza Nova

@NoFunStudio 3 года назад

It's still just as good as you remember 👍

@charlesdiatta7806 Год назад

Where can I find the tufting cloth to fit this exact frame I built the same frame but I can’t find the cloth

@NoFunStudio Год назад

I've been getting mine on alibaba/aliexpress - there's a bunch of different sellers.

@tamiaellis1815 3 года назад

Now the real question is where do you find tufting cloth that large to fit that!?

@NoFunStudio 3 года назад

Aliexpress

@crazypurpleicecream 3 года назад

I bet your downstairs neighbors love you

@NoFunStudio 3 года назад

My studio is in a big old factory building, the floors are concrete under the flooring. My other neighbour is a woodworking shop, thankfully.

@crazypurpleicecream 3 года назад

@@NoFunStudio That's good 🤣🤣

@JoshsLawnServiceTV 3 года назад

How do u get this type of frame to Sri still while tufting

@NoFunStudio 3 года назад

I'm able to screw mine directly into the floor. Before that I would keep one of my feet stood down on the foot section of the frame- that should stop it from going anywhere as you tuft. Or weights/longer feet would help stabilize if it's moving around on you as you work.

@CaptainChaozz 9 месяцев назад

bruh youtube glitched and it replaced your video with a burger king ad and i thought you rick rolled me i was like no way so i look in the comments and me already being confused see people saying thanks and all that so i became more suspicious and thought everyone was in on this little burger king ad joke or something. i refreshed the page and here you are.......

@tizianodefazio3159 Год назад

about nail what king of I should use it ?

@NoFunStudio Год назад

You should use screws, not nails. Screws will hold the frame together more securely than nails, which will shake loose over time.

@jkgkuj 3 года назад

Is it possible to get the exact wood measurements so I can get it from my local home improvement store that cut the wood?

@NoFunStudio 3 года назад

For the leg sections: two 3' tall for legs, two 2' long for feet, four 1' sections for leg support braces, cut on 45 degree angles, keep the triangle offcuts for support braces between the legs and the frame. The frame part can be any size you want. 4'x4' is easy to do because it's two standard 2x4's, but it depends on how big a rug you wanna make.

@jkgkuj 3 года назад

@@NoFunStudio thanks a lot !

@taliayahherron1274 3 года назад

@@NoFunStudio would the 4x4 size change the size of the leg measurements?

@NoFunStudio 3 года назад

@@taliayahherron1274 Nope, all the legs on all my frames are the same size.

@taliayahherron1274 3 года назад

@@NoFunStudio thank you

@Inuweeb Год назад

I still got a knife in my abdomen even though I wore gloves. Please advise.

@NoFunStudio Год назад

Do not remove the knife. Carefully wrap your wound (around the knife). Seek help from a medical professional immediately. Good luck, and don't forget to hit subscribe!

@haizenn1974 2 года назад

Unscrewing the frame off from the legs to adjust the height seems like a lot of trouble than just putting like two boxes or something underneath the legs.

@NoFunStudio 2 года назад

Whatever works for you, if you can find two boxes that are stable enough, but, I imagine it would shift around a lot during tufting which isnt ideal. I have a power driver in the studio at all times, doing a couple screws only takes a few seconds.

@manlymcstud8588 3 года назад

what kind of projector do you use?

@NoFunStudio 3 года назад

super cheap 1080p projector off the jungle website, it's "Dr.J brand", though I'm not sure what kind of doctor they are. Faster than taping together computer printouts & less paper wasted.

@samkush__3051 3 года назад

How do I cut the slant. Correctly ?

@NoFunStudio 3 года назад

Every 'slanted' cut required on this is at a 45 degree angle, nothing too fancy

@gloriasusana8368 2 года назад

Y todo lo tiene tirar contra el piso? Que fastidio azotando todo parece un loco😵😵

@barbarastefani254 3 месяца назад

I have a metal frame what can I do to get a nail frame to add to the metal don’t like the clips that came with this kid made a mistake and bought the middle one

@NoFunStudio 3 месяца назад

I'm not completely sure I understand what you're asking - but you could likely drill out holes in the tack strips and metal frame, then attach the strips to the metal frame with rivets- rather than hammering them into a wooden frame.

@maryalenaflormendoza5271 2 года назад

OKAY new crush

@nabihahabibullah1577 2 года назад

💐🖐️

@charlesdiatta7806 Год назад

What size tufting cloth do you use ?

@NoFunStudio Год назад

Depends on what rug I'm trying to make- I just buy it huge and cut it down to whatever size I'm doing.

@user-jh8so4gf2c 2 года назад

Bro what did the floor do to you

@NoFunStudio 2 года назад

You don't even wanna know.. We got into a fight when I was installing it, and I clearly never let it go 😅

@miramanuel9845 2 года назад

What do you call the one you painted red?

@NoFunStudio 2 года назад

they're carpet tack strips, designed for installing carpet. They're available at most hardware or flooring stores.

@yakojhones Месяц назад

Isn't the top bar bending down like a fatty belly?

@NoFunStudio Месяц назад

The board might have a bit of a warp, everything I used in this video was old used lumber. Once the frame has cloth stretched over and the whole frame is under tension it doesn't really matter.

@maxierosales4609 Год назад

What kind of fabric do you use?

@NoFunStudio Год назад

primary tufting cloth

@DukeUniversity5 2 года назад

Where can I get/find the fabric to cover that whole frame?!

@NoFunStudio 2 года назад

on alibaba!

@DukeUniversity5 2 года назад

@@NoFunStudio is that the same thing as aliexpress?

@NoFunStudio 2 года назад

@@DukeUniversity5 more or less, yes

@janlinke9854 3 года назад

Lumber is sold in longer than 8ft lengths

@NoFunStudio 3 года назад

All of my local lumber yards carry 8', but you're right, the availability of that shorter size does vary regionally.

@muqbilovagulsabah3182 2 года назад

Where did you get these strips?

@NoFunStudio 2 года назад

You can find them inexpensively at most hardware stores, or amazon probably has em

@erikfreeman8063 Месяц назад

Where would I find 6x8 monks cloth🙄

@NoFunStudio Месяц назад

Primary tufting cloth is sold by the meter, most suppliers I've seen offer larger sizes.

@sagerosado8111 2 года назад

its no fun studio but the guy is funny itself

@quinwest 3 года назад

WHATS UP INNTANET

@NoFunStudio 3 года назад

INNERNET ❤️

@johnpaulruiz8956 2 года назад

The orientation of the wood of the frame is wrong. The middle part of the span will sag. The wider face of the wood should be facing you. I would like to see you stretch fabric on this frame. I hope I'm wrong with my assumptions. Nice build though.

@NoFunStudio 2 года назад

You're right, there is a bit of flex in the longer sides when the fabric is stretched on, but since you can't really tuft right up to the edges of your frame either way, it doesn't really matter. I don't run into that issue at all on the smaller frames using this build method, and I'm assuming most people watching this won't end up making a monster sized frame like this.

@leabrunet-wong8625 2 года назад

@@NoFunStudio am I right to think that If the wider part faces you then there’s less surface area to tuft but it would have better stability? So the frame would also need to be mitre joined in each corner like a standard picture frame? Thanks :)