Тёмный
No video :(

How to build a SHOWER BASE WITH CONCRETE!🛠😅 

Hugo Correa
Подписаться 287 тыс.
Просмотров 1,9 млн
50% 1

New video installing HYDRO-BLOK, the better shower system. You'll love it!
⭐ • How to build a curbles...
To get this shower floor drain and other supplies go to: www.amazon.com...
Having a beautiful shower is the dream of many of us, to be able to fell relaxed and regenerated after each time we use it is one of the most inspiring feelings. When I build showers I think about the positive impact in my client's life or to whoever I am designing of building one for. As you demolish several of them you start seeing a pattern of flaws that can be corrected with new technologies and materials available, PVC shower liners are designed to protect the sub-floor as the first element attached to the drain lines; its proper installation is crucial for the preservation of all the elements that conform the system, those are: the PVC liner, the mortar mixture (sand and cement), the thin set cement, the tiles and the joints grout. the liner must be inclined towards the drain always preventing areas higher than the liner so the water can drain properly.
You can create virtually any type of design as long as it has the proper inclination. I try to always use tiles that can create a non slippery surface for the floors, mosaic tiles are perfect for it, even if they are slippery in nature the gaps between the small tiles can give you traction. Use acrylic solutions to mix the grout, it will help you to maintain the floor free of mold and dirt.

Опубликовано:

 

19 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 517   
@HugoCorrea
@HugoCorrea 4 года назад
New video installing HYDRO-BLOK, the better shower system. You'll love it! ⭐ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-D2KoGDWIF5A.html
@kellymcguire5912
@kellymcguire5912 6 лет назад
Very good instructions! I haven't installed a complete shower in over 10 years and wanted to check for a refresher course. This is exactly how I have alway done it. Thanks!
@HugoCorrea
@HugoCorrea 6 лет назад
Kelly McGuire I’m happy I can help you, thank you
@aroncarvajal7080
@aroncarvajal7080 8 лет назад
Hugo Correa no pongas atencion a los malos comentarion yo veo muchos videos de estos y creo que ninguna de las personas que hicieron malos comentarios han puesto videos en you tube gracias por tu contribucion y Dios te bendiga.
@ml203
@ml203 8 лет назад
Hugo, Thank you for kindly sharing your knowledge/expertise. It is greatly appreciated. Best Regards
@sukeywatson1281
@sukeywatson1281 Год назад
Thank you for an excellent video with very clear instructions, no rambling on etc….
@toddalan333
@toddalan333 7 лет назад
1. Back in the day, Plumbers did install the pans. Mostly metal pans. Tile installers, Marble Masons do this now. 2. Material is Sand mix, or Mortar mix, and is not concrete, application is (Dry Pack). 3. Most important, Pre-float is necessary for pan to drain to weep holes. Waterproofing the pre-float is also a good step to do prior to installing pan material, (Optional). 4. Wood curbs are an acceptable practice in some areas, but concrete curbs done right will last forever. Wood curbs require lath, or cement board to be fastened by nail, screw, or staple prior to tile install, which can sacrifice the pan material. Moisture will sacrifice a wood curb. 5. Lath installed in dry pack, is optional for final mud application, and pitch to drain. 6. A wood darby float is used for packing and shaping the dry pack. 7. Thinset is used for bonding the penny tile,( Mosaics).Grout and seal. Their is a difference between skilled labor, and the pros that make a living, not cutting corners.
@nguoinhennguoinhen
@nguoinhennguoinhen 7 лет назад
Todd Hinkel
@irishsavage8715
@irishsavage8715 5 лет назад
He didn’t even water test it before pouring...That is the mark of a rank amateur...Too many step to list that he didn’t do.
@evianway
@evianway 5 лет назад
Todd, (question at bottom for you)...great points! Congrats! DYI ers, , a picture or a video is not worth 1000 words!. There is lots of sections not shown here in doing the job by yourself, I advice to hit the Universal building code specifications for many details not included here. For further clarification in Todds Hinkels great notes, the weep holes location are at the connection point of the top drain to the flange which flange is pressing on the liner. You can bet there is going to be moisture making its way below the floor tile, then hitting the liner, and it has to go somewhere, (thus the slope to make its way towards the drain (below the floor concrete). I was glad to see Hugo Correa do the "dry packing" method, I discovered it from a Russian Tile sub 25 years ago and it makes things very easy to achieve great top slope results. Question. Have you ever used (not kiln dried) just regular pressure treated "air dried for a month" pressure treated wood on the curb? and do you know if it's allowed by code? Also, any innovative solution when penetrating the liner with a few screws on top of the curb, if you pre-mark the screw spots, and below them you set a tab of silicone, we know it will act as a self sealant (I have no questions on long lasting integrity there, but any idea what the code said on this?)...I thought I'll find this answer right away but after 5 mins I thought to post it here. Take care!
@karlrex2757
@karlrex2757 10 лет назад
Thank you! after watching and listing to your advise, the shower pan is in and I have to say for my first one, it looks pretty darn good. FYI I added a preslope with mesh, and below the preslope is a layer of tarpaper. :)
@HugoCorrea
@HugoCorrea 10 лет назад
Karl Rex very smart!! thank you for watching the video
@jroon5146
@jroon5146 7 лет назад
One of my walls is an 'outside wall' with furring strips and there is no 'gap' to tuck the liner into. If anyone else has this problem this may help. So, If I just folded the liner and stapled it to the wood framing, then the sheet rock will bulge slightly in this area. The liner is about 1/16, a triangle or 'hospital fold' will have 3 sheets up against the wall, So I used my oscillator to remove 3/16 from the wood so the liner will fit into this recessed area.
@thomascerio8843
@thomascerio8843 8 лет назад
Hello my family and i have been installing tile for 4 generations and you should NOT place the PVC liner over top of the subfloor you need to first put a estimated inch of sand and topping mix first and before you even do that there are 2 steps please keep showing people your methods it keeps us in business
@nman2563
@nman2563 8 лет назад
+Thomas Cerio Not correct. You can do it either way as long as it is done well. Tilemasterga, one of the best bath construction channels on youtube does it that way. I have seen it as an option in many of the professional books and videos.
@larryfleming7295
@larryfleming7295 8 лет назад
+Thomas Cerio where is your videos?..i bet that shower worked fine...just because you say its wrong the whole world is gonna believe you...your one of those 2 ways kind...my way and the wrong way..you don't learn much with that mind set
@thomascerio8843
@thomascerio8843 8 лет назад
I didn't want to subject myself into this ridiculousness but even when you read on the package of the PVC vinyl it says do not lay on substrate. It does not get any simpler than that I am 4th generation tile setter I've laid more tile in my time than you probably ever will with your smiling face in your beautiful Photoshop can you say cheese anyway you should stop being stubborn and take advice from people who have been doing it 430 plus years because with that profile picture it looks like you're about 13-14 years old so again read directions and take advice from old timers because if you don't and you think you know it all you're getting nowhere people like myself don't have to post videos or this or that because the work just comes to us because we have built a name I'm not going to go on and on about this but stay off whatever platform or however the hell you got a hold of me and stop giving people false advice
@nman2563
@nman2563 8 лет назад
Thomas Cerio You fail to understand the point others are making. Noone is questioning your way of doing things. They are telling you that there is more than one way to cook barbeque. Many of the experienced builder videos I have watched on youtube - people who obviously know what they are doing such as tilemasterga do not use a preslope. If you don't believe them then I can't help you.
@thomascerio8843
@thomascerio8843 8 лет назад
Please no disrespect to you or whatever company or handyman service you may run but according to Canada code and United States code and most of our 50 states all the lower 50 if you don't buy off the road you will see on the package do not lay on substrate it is meant to be sandwiched in between two layers I'm telling you this to improve the works of tile because I have done tile my entire life it is my life my whole family's life we are in the ITA Italian tile so CA shin and you have to trust me when I'm telling you certain things so just maybe next time you're at a Home Depot when you buy off the roll there's no directions but some Home Depot still carry the kit I forget if its 35 square feet or 40 square feet of rubber lining but it says directly on the package do not lay rubber lining on substrate and it explains how to sandwich in between two sloped areas also you have to think about where's your we pull protection do you need some sort of substrate protection you need a water Bond otherwise it will fail after time especially depending how many people are using the shower if the family has 5 kids you know it all depends I say this because I appreciate and respect tile
@franciscotorres6760
@franciscotorres6760 8 лет назад
I'm the type of person to watch a video and keep my comment to myself but for this amazing video I must say it explain everything I needed to know , Thank You
@shootfighterbusa1132
@shootfighterbusa1132 7 лет назад
water leak test pan prior to installing dry pack(mud pan)
@vicschauberger2737
@vicschauberger2737 Год назад
Use regular lumber for the framing of your bench. If the Durarock is installed correctly over the framing it shouldn't get wet . Pressure treated lumber can warp after time and ruin that part of the shower stall . you need tar paper or bituminous barrier over your subfloor with metal tile lath stapled down to the floor with a 1/4 " pre slope drypacked mortar bed before you install your shower liner . Then you can install your mud bed that you tile over . After the shower liner is installed and properly wrapped over the curb , I usually install the preformed curb and screw it to the outside of the curb before I place the final mortar bed , so the shower floor mortar locks it in place .
@12341walkman
@12341walkman 10 лет назад
Love your video's Hugo, I can't wait to see more of how you finish up on this bathroom. God bless you and yours....
@HugoCorrea
@HugoCorrea 10 лет назад
Thank you, I am trying to make the world of construction a bit simpler so many can do projects by themselves
@HugoCorrea
@HugoCorrea 9 лет назад
there are plenty of good reasons to hear the good and the bad, we must understand that not everyone is ready to comment in a polite way positively or negatively. thank you for your comment
@luismencia2077
@luismencia2077 7 лет назад
Hugo Correa thank you for this video it helped a lot I had to practice on my shower first before doing customers and not messing up a I appreciate it
@chrislour8938
@chrislour8938 6 лет назад
Hey buddy don’t worry about the bad comments, I don’t see anybody making videos to try to correct what you are doing. At least you have the balls to post your work. Keep up the good work.
@johnb9394
@johnb9394 5 лет назад
@@chrislour8938 even if he is going to make a problem later?
@pattyhernandez5432
@pattyhernandez5432 4 года назад
Thanks for the video. You covered a few details others dont.
@dannyesc577
@dannyesc577 8 лет назад
La intencion de ayudar alas personas a instalar el shower pan liner es buena,pero hay varios errores en esa instalacion del pan liner,ese shower es 100% seguro q en un año o menos estara dañado y olera a agua podrida,he reparado y demolido muchos baños a causa de esos errores,amigo hugo te aconsejo que antes de instalar un shower pan liner se necesita poner barrotes alrededor de las paredes ya sea 2por6 o 2por8,como braces en la parte de abajo para que el hardy backer se pueda atornillar mejor y quede mas firme ,sin poner los tornillos muy abajo,y el otro error es q no pusiste el concreto debajo del pan liner para que el agua y la humedad se vayan hacia el drenaje eso es muy importante,y el otro error es q no pusisite esquineros en la parte de arriba del curb por ahi se transmina el agua al poner una puerta de vidrio ,son puntos muy importantes para q un baño no tenga problemas con el tiempo,porq despues es muy costoso hacer ese tipo de reparaciones,es un consejo de mi parte que tengo 17 años trabajando en baños ,saludos desde houston tx
@NORTISHOW
@NORTISHOW 8 лет назад
+danny esc nunca falta el que todo lo sabe calmate maestro!! si tu puedes hacerlo mejor entonces para que estas viendo estos videos!!!???
@dannyesc577
@dannyesc577 6 лет назад
Gonzalez Tile and Stone Services No, camarada usted solo escribe su comentario sin ningun fundamento,el que yo mire los videos no quiere decir que lo se hacer mejor, o que no lo se hacer,siempre se aprende hacer algo de alguna persona,hay personas que saben hacer cosas y de ahi tal ves uno pueda tener algun tip o alguna idea, usted tambien es tilero y porq miro este video?en ningun momento dije que lo sabia hacer mejor que esta persona,simplemente dije algunos consejos que yo se que afectan el trabajo, y si a usted no le agrado eso pues es su problema, no mio cada persona hace las cosas asu manera, y usted como instalador de tile debe saber lo que afecta un proyecto para un cliente,que pagara material y mano de obra y que al final le hicieron un trabajo q en poco tiempo estara demoliendo,ami me gusta aprender y dar consejos tambien no olvide que siempre se aprende algo nuevo.
@terryreyes1125
@terryreyes1125 5 лет назад
@@dannyesc577 yo tambien estoy en Houston mi amigo y soy aprendiz por el momento. Me concidero aprendiz pq no trabajo por mi cuenta todavia. Saludos amigo y muy bien dicho.
@dannyesc577
@dannyesc577 5 лет назад
@@terryreyes1125 saludos camarada✌,siempre hay que tratar de aprender cada dia mas y hacer los trabajos cada dia mejor,y nunca le faltara el trabajo,👍los clientes son lo mas importante para siemore tener buenas recomendaciones.
@sawyerramos3113
@sawyerramos3113 5 лет назад
Hugo, this is just what I needed. I am rebuilding my master, and you nailed it! thanks.
@HugoCorrea
@HugoCorrea 5 лет назад
Sawyer Ramos you’re welcome, remember the pre slope
@katkiller50
@katkiller50 10 лет назад
Im a GC and do about 15 shower jobs a yr. When I work for some home improvement companies, their quick to shoot down Schluter, saying im "old school" and don't wanna pay $500 for a kit, however as pricey as it is, the Schluter system is gonna save gobs of time, provide a mechanical floor bond to the Kerdi, and prevent future mold. I'll race 2 pros using the old method against me using the new(Kerdi) and still win.
@shootfighterbusa1132
@shootfighterbusa1132 7 лет назад
no pre slope, no crush rock by the drain, don't seal drain to shower pan with glue or caulking it will clog weep holes in drain assembly. slurry pan with really wet thin set prior to deck mud and silicone all penetrations.
@HugoCorrea
@HugoCorrea 8 лет назад
it Must be sealed very well to avoid damages on the steuctures
@larryfleming7295
@larryfleming7295 8 лет назад
+Hugo Correa did it work? if so ignore the haters
@attimount
@attimount 3 года назад
No pre slope on shower liner, shower bench and curb from 2x4. I used to build curb from the same concrete as the shower base, incorporating the liner in the middle. Red Guard the top and side of curb, you'll never have a problem. 2x4 bench, never been a fan of that, styrofoam bench is widely available, lightweight, no mold, no movement, waterproof it with Kerdi. At last the best shower kit, (imo) Schluter System is the best shower kit and I'll highly recommend using it. Best of luck.
@darragh516
@darragh516 9 лет назад
Great video Hugo. Mixing the sand mix with fortifier makes it waterproof and then regard it for extra waterproofing
@HugoCorrea
@HugoCorrea 9 лет назад
Denis Keane Good Ideas, thank you for your contribution
@boomertooaroo
@boomertooaroo 9 лет назад
I think you meant redguard, but put the redguard down first , and there is no need for the wire in a shower that small.
@semperfi7184
@semperfi7184 6 лет назад
Very good explanation brother good job thanks for sharing
@HugoCorrea
@HugoCorrea 6 лет назад
Thank you, I will make more videos about the topic
@Carolinaboi313
@Carolinaboi313 6 лет назад
I build my pans not using a liner. I do a pre slope, waterproof it. Then I do a final slope. I always do my floor tiles last
@ortofoncape
@ortofoncape 4 года назад
Pressure treated wood is typically very wet in comparison to kiln dried spruce which would cause an increased amount of shrinking over time . I would think the water should never reach the wood of the curb .
@HugoCorrea
@HugoCorrea 4 года назад
You are right, I have seen many rotted curbs but again water went through the pan, I waterproof the shower base more carefully now and install common studs instead. Thanks for the comment and the atching my videos
@steinonj
@steinonj 8 лет назад
Thank you for an easy to follow video
@HugoCorrea
@HugoCorrea 8 лет назад
my pleasure
@katherinebollig7100
@katherinebollig7100 7 лет назад
Hugo Correa r
@mariomedina9718
@mariomedina9718 8 лет назад
falto hacerle caida por debajo del hule para que con el tiempo no tengas problemas con el agua estancada y huela Feo. porque si el agua pasa el cemento que le pusiste arriba el hule no tiene caida hacia el drain.y el agua se quedaria estancada. y enfrente en la entrada te faltaron esquineros porque si pones una puerta de vidrio fijate donde cae el agua. bueno es mi simple opinion
@ricardocortes4356
@ricardocortes4356 5 лет назад
Tienes razon falto la caida antes del hule
@georgegrote7836
@georgegrote7836 4 года назад
Thanks for the video. it was very to the point and probably saved me a few mistakes when i try my first one.
@HugoCorrea
@HugoCorrea 4 года назад
Great, helping saving money is a good thing
@bahtahandobo
@bahtahandobo Год назад
How does water that goes through grout and concrete and sits on liner drain? I see no pre slope under liner so water can reach drain.
@georgegrote7836
@georgegrote7836 Год назад
@@bahtahandobo I havent watched in two years but i think there are slots in the thread of the drain so you tuck your liner into the drain, screw in grate and your pack gravel around the neck so when you pour it doesn't clog these slots. This is how i've learned to do it since watching this video, anyways. I just mark the height on the shower walls with a marker and set the drain off of that and then screed from there. It takes a lot of care and/or practice but you can do that and just eyeball it.. or make a slanted screed board i suppose
@NORTISHOW
@NORTISHOW 8 лет назад
hugo very nice work good explain!!!! I like the way you do it!!! keep up the good work and when someone gives you a bad comment it is nothing else then envy!! all I can say is your work is great!! love it
@cresten1000
@cresten1000 9 лет назад
nice work Hugo! please keep doing video they are very helpful..thanks
@HugoCorrea
@HugoCorrea 9 лет назад
cresten1000 With pleasure, I will be making more soon.
@KingParisBuckingham
@KingParisBuckingham 4 года назад
Show how you prep the kerb with wonderboard and tile the kerb
@HugoCorrea
@HugoCorrea 4 года назад
Ok, I will
@KMINES007
@KMINES007 4 года назад
Thanks brother God bless and keep being amazing .
@carladowell5475
@carladowell5475 7 лет назад
I got some good tips from your video. I wish you had shown putting in the liner. I was also wondering about pebbles in the weep holes.
@7358sparky
@7358sparky 7 лет назад
Thank you. Very instructive and very helpful.
@RemodelingHQ
@RemodelingHQ 10 лет назад
Great video Hugo, I came up with a simple method to slope under the liner that works great before you lay the liner base down. How To Install A Shower Preslope
@catlady8324
@catlady8324 4 года назад
RemodelingHQ You came up with that? You must be the guy who discovered that water flows down hill!
@rudyhernandez3083
@rudyhernandez3083 8 лет назад
Acabo de ver esto y nunca e visto a alguien prepararlo de esta forma. Pero si tiene buen resultado adelanto. Ya que no pude ver como preparar las paredes para que esten seguros de no tener un liqueo despues
@oliverlawrence8036
@oliverlawrence8036 6 лет назад
Great video, thanks a bunch Hugo!
@douglaspayne5162
@douglaspayne5162 7 лет назад
Thanks for the video Hugo. Some of the comments made are actually correct. 2 x 6 to support the mud bed between the studs is very common, pre-pitch under the shower pan liner is a code requirement in Florida. Not sure why people get so bent out of shape about putting a screw in the shower curb when putting backer board to tile over. If you use a water membrane and tape like Laticrete or Red Guard that completely waterproofs the screw holes, not to mention there will be a polymer modified thin-set over that which is also a reasonable water barrier. Anyway, I've seen your videos and they are well done.
@HugoCorrea
@HugoCorrea 7 лет назад
Douglas Payne thank you, I really like the improvements on building codes, we can always be more accurate and correct when building
@douglaspayne5162
@douglaspayne5162 7 лет назад
My friend has been doing kitchens and bathrooms for 30 years. What I like about him is that he keeps up on the changes in technology. I know some old timers that will put silicone caulk on top of the drain and block the weep holes - so at the end of the day we have to see what the manufacturer recommends and then follow their installation techniques since they make their products to comply with national codes.
@HugoCorrea
@HugoCorrea 7 лет назад
Douglas Payne you are right
@ramcity05
@ramcity05 5 лет назад
Amazing video bro thanks
@HugoCorrea
@HugoCorrea 5 лет назад
RAM City thank you
@RealCoolGuy
@RealCoolGuy 9 лет назад
I love the trick with the 2x4 for measurements! Thanks!
@HugoCorrea
@HugoCorrea 9 лет назад
RealCoolGuy Thank you very much.
@sanjupatel1909
@sanjupatel1909 6 лет назад
RealCoolGuy bio
@duanekamstra8890
@duanekamstra8890 5 лет назад
Yes, good tip
@areare926
@areare926 5 лет назад
@@sanjupatel1909 rookie
@carlossantos4365
@carlossantos4365 4 года назад
Im a registered and insured contractor for over 21 years and I can safely say that there is a few mistakes on his demonstration. Before you install the liner ,you need to pour mortar mix with the appropriate pitch and install the liner over that with another mortar mix pour over that , the reason is because the finished shower floor is not 100% water tight and with time will let water thru, if the liner is installed flat on the subfloor ,the water will colect under the tile and eventually soften the mother mix and the tiles will come apart. The second mistake on the video is the way he uses a 2x4 as a measurement to create the pitch, that will only work if the floor is completely level, in 4-5 feet span the floor can drop to one side 1 inch therefore if you use a 1.5 inch around the shower floor ,the water will not drain to the strainer, You need to place a level on top of the floor drain and mark the wall around to create the right pitch.
@LarrySbrusch
@LarrySbrusch 5 лет назад
Great video...Very well explained.. I am going to tackle both of mine in my new home build next week.. Thanks
@gregwilkin2610
@gregwilkin2610 10 лет назад
Sal and Hugo, you both left out 2x8 blocking along the shower base.
@scottatkinson9100
@scottatkinson9100 10 лет назад
Hugo, great video. When you set 1st part of drain into plywood, do you place a bead of silicone between plastic and wood? Secondly, do you use the same mortar mix for both mortar beds? Lastly, and as specific as possible, can you give us the mortar mix recipe? Thanks.
@HugoCorrea
@HugoCorrea 10 лет назад
Scott Atkinson the drain must be as low as possible but properly supported, no need of silicone at that moment, yes you can make a 1 part of mortar cement and four parts of sand and use them to build a pre-slop bed before the installation of the shower pan, after that you can use the mixture over the PVC pan. Thank you
@HugoCorrea
@HugoCorrea 8 лет назад
thank you
@checkerslane
@checkerslane 8 лет назад
where are you located?
@miguelsr499
@miguelsr499 7 лет назад
puedo utilizar silicon blanco
@tilespecialties1194
@tilespecialties1194 8 лет назад
pre slope is important!!!!............once the water passes through the Tile Assembly it will be trapped ...making it difficult to drain properly
@oreokookie1000
@oreokookie1000 4 года назад
do you first pour a pre-slope??? Why would water go thru the tile assembly? This video leaves out alot of things, but i have only done one tile job, i am a painter...a few posts ago, the one guy says that you need to pour a base UNDER the rubber matte......then a 2nd pour over that....
@purochikano1
@purochikano1 4 года назад
Hugo muy buen video yo necesito hacer mi shower tambien
@HugoCorrea
@HugoCorrea 4 года назад
Voy a subir mejores videos, gracias por seguir mi canal
@andreysheyfer546
@andreysheyfer546 6 лет назад
Some drain rock around the drain would have been nice...those weep holes are there for a reason... But not bad overall..
@HugoCorrea
@HugoCorrea 6 лет назад
Andrey Sheyfer thank you, I do now now, we all have room for improvement
@Bryanrrrr
@Bryanrrrr 9 лет назад
Awesome, thanks. Im a carpenter and was wondering what to do with the bathroom.
@mattalbrecht7471
@mattalbrecht7471 4 года назад
So let me make sure i have this right. 1 - cut the hole for the drain 2 - make sure the drain is level with the floor 3 - screw the base of the drain into the wood 4 - THEN cover the floor it with this thick plastic... 5 - cut a hole in the plastic for the top part of the drain?
@byronjones8246
@byronjones8246 4 года назад
Great video man thanks!
@michaelabelaj1581
@michaelabelaj1581 4 года назад
Can you explain again how you determine the height of the drain after the cement? I plan on using Ditra on top of the mud bed and then tile.
@HugoCorrea
@HugoCorrea 4 года назад
Just a difference from the full 1 1/2" to 1 1/4" at the center
@barbarariedel6432
@barbarariedel6432 5 лет назад
Thanks for the video -- very helpful!
@RayBeato
@RayBeato 8 лет назад
Hugo una instruccion de la manera de hacer la banera y todo...yo voy a hacer la mia pronto...voy a seguir tus direccion..Gracias papaRay Beato, Roswell ga.soy realtor aqui en Atlantaa area asi que a sus ordenes..y a todos por igual.saludos .
@MrAmagaska1976
@MrAmagaska1976 9 лет назад
awesome! really helpful thank you!
@annefagala2532
@annefagala2532 9 лет назад
Thank you Hugo!
@itomba
@itomba 10 лет назад
You really should preslope the pan to the drain before installing or apply a Schluter Kerdi membrane to mortar float bed afterwards. This creates a double layer of protection. Also, and most important, do not trust the floor and a two by four. Create a level screed around the perimeter of the shower and then notch a stick to the thickness of your tile and pull from the drain to your level screed which is 1/4inch per foot higher than your drain. Unfortunately I started in this business when we still used lead pan liners. Also, notch your studs, especially in the corners so you do not have several layers of pan kicking the cement board out of plumb.
@HugoCorrea
@HugoCorrea 10 лет назад
itomba thank you for the contribution, people like you are the ones we need on the web.
@hanktapia2016
@hanktapia2016 4 года назад
Under the membrane you need to have that pitched not flat so that the water that goes through the membrane does not just sit there because it will cause the shower pan floor tile and grout to mold it needs to drain towards the drain itself. I usually cut a three quarter inch furring strip and place them down around the shower pan with screws using them as my guides for the pitch down to the drain. If you don't do this the concrete that the tile sits on will constantly sit in moisture and will never ever dry out unless you stop using the shower for maybe 2 weeks or more depending on the temperatures
@HugoCorrea
@HugoCorrea 4 года назад
You are right, it is very important to have the pre slope. Thanks for the help
@dannyvee4499
@dannyvee4499 3 года назад
you cant wrap wood with pan liner if it leaks and the wood expands then if the curb likely has a glass like most showers do now a days then the glass will get tension. and could break and curb tiles might loosen up and fail because you used wood and not 4x12 cinder block
@HugoCorrea
@HugoCorrea 3 года назад
Great información
@shawnnunez4587
@shawnnunez4587 Месяц назад
How much does it generally cost to install a shower pan like this?
@Alen221
@Alen221 4 года назад
No pree slope. I never use studs for curb.
@HugoCorrea
@HugoCorrea 4 года назад
How do you do the curb?
@kennyodom1005
@kennyodom1005 7 лет назад
why can't you use regular concrete? great video
@tj7935
@tj7935 4 года назад
Why did you not include a pre-slop before the liner?
@HugoCorrea
@HugoCorrea 4 года назад
Many years ago the pre sloping was not used as we do new, please pre sloping your shower before you install your liner
@pasqualepisani
@pasqualepisani 4 года назад
good video, thank you. Do you have a video that shows how you waterproof the shower bench and then tile it?
@renedelafuente123
@renedelafuente123 10 лет назад
Would'nt it be easier and more efficient adding a shower base instead? How much would you charge, ball park figure on a finished shower? Thanks for the video.
@HugoCorrea
@HugoCorrea 10 лет назад
Tony Garza shower bases are made for a specific size, by making yours you can fit it anywhere. prices can vary a lot from one to another but is this case this one was $6000.00 US dollars
@TonySRMaio
@TonySRMaio 10 лет назад
Hugo Correa
@Johnny53kgb-nsa
@Johnny53kgb-nsa 8 лет назад
Hugo, how do I find somebody to install a shower pan, and do it right? Do most plumbers know how to do this? Thanks for sharing the videos, Johnny
@HugoCorrea
@HugoCorrea 8 лет назад
for some reason plumbers don't put much attention on the process but look on Angie's list and home advisor for professionals
@itsokaytobestupid827
@itsokaytobestupid827 5 лет назад
Plumbers do the plumbing, tile setters build the shower stall, if you wanted to pay a plumber to build a shower stall my firm charges 235 an hour. Employ both a tile setter and a plumber for the project, make sure permits are acquired, the administrative authority will require tests confirming the membrane is water-tight, at rough inspection
@elisagrimes4912
@elisagrimes4912 9 лет назад
I need to learn because I want to fix my bathroom thank you
@WayneMeador
@WayneMeador 10 лет назад
So do you use a concrete board on the walls and bring it down the the concrete shower base and seal that joint somehow? Good video Hugo Correa!
@HugoCorrea
@HugoCorrea 10 лет назад
That is correct, the walls will be cover with 1/2 inch concrete boards, the seams will be sealed with a fiberglass mesh and a waterproofing membrane solution. Thank you for watching
@ericaguilar533
@ericaguilar533 9 лет назад
a lesson in life I learn never trust another man work search more get yourself informed of how a job is done don't look just one video look hundreds of videos before you start. get as many information as you can; that way you know what you're doing. I hope this video helps you to understand.
@HugoCorrea
@HugoCorrea 9 лет назад
Eric Aguilar Thank you
@johnurcia1083
@johnurcia1083 3 года назад
Good video
@HugoCorrea
@HugoCorrea 3 года назад
Thank you
@tomb.9348
@tomb.9348 7 лет назад
Cool, how many days the mortar needs to dry after you pour it in to be able to do something with it? I plan to coat it with one of those waterproofing liquid membranes - Red guard I think is what you call it in States. Just poured in the showerpan based on your video and now wondering how long I need to wait, It has moisture plastic membrane under it so I just don't want to seal all the water inside the mortar from all sides by fully waterproofing it from all sides.
@HugoCorrea
@HugoCorrea 7 лет назад
+Tom B. Wait at least one day, thank you for watching my videos
@Alana9374
@Alana9374 10 лет назад
You forgot to slope the floor before placing the shower pan liner. You should also do a drain test to make sure nothing is leaking. Did you place silicone on your drain before installing the membrane? I suggest you do some more research on all of the precaution other people make and you will see what I'm talking about. Go to oaty website and see their video. You should also install some corner dams for extra precaution.
@TraeDantzler
@TraeDantzler 8 лет назад
Thank you!! Great overview video!
@roberthawthorne6515
@roberthawthorne6515 5 лет назад
I was taught to pour a full pan and build the bench from masonry block..
@carlossantos4365
@carlossantos4365 4 года назад
Your completely right, build a full water tight pan, than build your seat
@eligm19
@eligm19 9 лет назад
Hola Hugo. Si la base es mas alta como unos 18 inches, necesito hechar cemento para llenar la altura que quiero? no seria muy pesado?
@thuyt6460
@thuyt6460 6 лет назад
how will the water drain into the weeping holes if there was a leak?
@HugoCorrea
@HugoCorrea 6 лет назад
thuy t the water will travel under the concrete bed to the drain, make sure your drain is low enough to serve the purpose, add a pre-slope to ensure the water traveling to the drain
@rickygoings4823
@rickygoings4823 9 лет назад
if their were a plastic shower in the basement. I have to remove the shower and frame the show. Do i have to re pore concrete after the vinyl sheet
@HugoCorrea
@HugoCorrea 9 лет назад
Ricky Goings That is correct
@oneundecided
@oneundecided 3 года назад
Thank you for this video. I am just learning it. May I ask you what type of mortar mix do you use? N-type of mortar mix is made of 1 part portland cement, 1 part lime, and 6 parts sand. The S-type of mortar mix is made of 2 parts portland cement, 1 part lime, and 9 parts sand. What is your recommendation regarding it?
@MyAngelina1234
@MyAngelina1234 9 лет назад
I've read a lot of these comments i thought the information was educational but if this is your first time doing this do look at other videos to make sure but please stop with the negative comments some people are rude and have no life hugo decided one day to do a video why knock him at least he has courage to do it wheres your videos you negative people grow up and get a life.
@HugoCorrea
@HugoCorrea 6 лет назад
Angelina davis we can only hope to be Better, there is always room for improvement. Thank you so much
@irishsavage8715
@irishsavage8715 5 лет назад
Yeah but if you read my comment about you will see a few steps that he missed and will definitely result in a leak...
@tylercrumley8082
@tylercrumley8082 5 лет назад
That’s what I like to call a “run-on sentence”.
@cecillec2331
@cecillec2331 4 года назад
Thank you, Angelina. Greatly built showers will not make up for the rudeness of a lot of people here. Comments can be made in either direction without being rude.
@johnschrock8521
@johnschrock8521 5 лет назад
Do you need to let the mortar mix dry before laying thin set and tile?
@HugoCorrea
@HugoCorrea 5 лет назад
+John Schrock about one day
@maxnguyen22
@maxnguyen22 5 лет назад
Nice!
@ltcajh
@ltcajh 4 года назад
You might want to hit the CC option when you upload your videos.
@antonioanom8298
@antonioanom8298 10 лет назад
Hugo your video is very descriptive and thanks for share, now my question is... Under the shower liner is suppose to be a cement base with the incline to the drain? please let me know, Thanks again!
@HugoCorrea
@HugoCorrea 10 лет назад
Yes, if you do not have (as explained in the video) the proper inclination, just add a little amount of cement (1/4 inch) to ensure proper drainage of the pan before you put the liner down.
@dustyflair
@dustyflair 10 лет назад
Hugo Correa Hugo, the whole reason for the pre-slope is....you ready for it...If the shower happens to leak you want the water to get to the drain area instead of running out under the wall and into the master closet or another bedroom or a hallway or a living room, whatever is on the other side of the wall. If that were new construction the inspector CHECKS, BEFORE installation of any mudbed or tile on top of the liner, for proper slope UNDER THE LINER. In most places it's 1/4" per foot. Every custom shower should have TWO mud beds...One under the liner and one on top of the liner. The only one that is MISSION critical and can actually FAIL an inspection is UNDER THE LINER. The mud bed ON TOP of the liner is simply so your client isn't standing in water and the water flows to the drain.
@nickduffy2361
@nickduffy2361 8 лет назад
great video good description of the slope and how to achieve it. now can you have just the concrete as a shower base?? If so do I need t I coat it with something??
@mindshotjon
@mindshotjon 8 лет назад
+nick duffy The proper way would have been to put tar paper first, then concrete pitch, then the rubber. Your thinking is right, the pan itself should be pitched to the drain. If you've gone as far as Hugo without the pre-pitch, you can waterproof the concrete and up the sides of the rubber to create basically a second pan. facebook.com/DeanBrothersTile/
@gugolero
@gugolero 8 лет назад
Qué proporción pones de cemento y arena para la base del concreto?
@user-lk4dl2pu6i
@user-lk4dl2pu6i 4 года назад
Hi Hugo. Many other guys put two layers of mortar. One below the lined, another above the liner. On your video you have one layer only. Can you explain?
@rogercrowder-pm1hh
@rogercrowder-pm1hh Год назад
Will this process work on a concrete slab as well
@orkayen
@orkayen 9 лет назад
Curious question. After the concrete is cured you will get a gap between the vinyl liner and concrete edges, all around, as the concrete doesn't stick to vinyl. However, when you put the cement board, it gets covered. But, you still prone for seepage through the bottom of the board. How do we eliminate this concern? Any thoughts?
@HugoCorrea
@HugoCorrea 9 лет назад
orkayen Water is going to get to the bottom of the pan no matter what, pre sloping the PVC pan is important as I do with many Shower pans. Applying a waterproofing membrane to the edges is important. you can get the liquid in a home improvement store
@RestoreITdontJunkIT
@RestoreITdontJunkIT 10 лет назад
good info.
@HugoCorrea
@HugoCorrea 10 лет назад
Thank you, for more educational videos please visit www.doiteasynetwork.com
@eostrow1963
@eostrow1963 6 лет назад
The first layer of flooring that I put on before the rubber membrane, is that first layer crack since it is so thin by the drain? Should I try to not step on the first layer even after it has dried? Thanks
@bijosn
@bijosn 8 лет назад
Thanks, great vid
@maksimzernitskiy5698
@maksimzernitskiy5698 9 лет назад
Great video.
@HugoCorrea
@HugoCorrea 9 лет назад
Maksim Zernitskiy thank you
@markprziborowski8670
@markprziborowski8670 9 лет назад
Hugo Correa Nice job on the video. I would of thought the framer would of put some backing for you in the stud area's. That way the plastic will have backing.
@pauld.643
@pauld.643 9 лет назад
Good job
@george777deppsr3
@george777deppsr3 7 лет назад
me gustan tus trabajos pero nunca has hecho un video trabajando en una ducha de concreto puesto que quiero hacer algo similar en concreto y necesito guiarme por ti.
@sonastainbrook
@sonastainbrook 6 лет назад
Man I really want to do this but it looks like a hard project. You make it look easy and I like the way you use the level and the 2x4s to make it drain. Can I ask what type of concrete mix to use for the pan? Also can I use some kind of epoxy paint for the floor ? My tile skills are limited. Thank you for a great instructional video!
@obedluna8082
@obedluna8082 8 лет назад
but the rest is very educational.Thanks!
@annettedawson2735
@annettedawson2735 6 лет назад
How to put the backer board on the baseline and tile
@robjennings39
@robjennings39 6 лет назад
I thought you made a pretty good video here. Yes some information or steps missing, but a descent basic video for the approach. Not sure why people are so negative, rather just putting the steps they feel need to be mentioned. Blessings.
@polloyoi13
@polloyoi13 8 лет назад
hola hugo oyes por que no ases un video de como preparal las padere del shower desde que pones las ojas de semento y el waterproof lo siento pero no se como se llama en eapañol jajaja asi lo conosi gracias por tus videos me an ayudado
@HugoCorrea
@HugoCorrea 8 лет назад
En dos días más haré uno acerca del tema. gracias por ver mis vídeos #showers #bathrooms #ideas
@polloyoi13
@polloyoi13 8 лет назад
Gracias a ti por compartir ha pero aslo en español porfavor que trngas felices fiestas
@paulh5503
@paulh5503 9 лет назад
Why don't you do a pre-slope?
@weathdone
@weathdone 6 лет назад
pre slope pre slope pre slope!!!!! if the mud is sloped whats the diff
@tewwdopee7292
@tewwdopee7292 4 года назад
What's the name of the cement you used? It looks very easy to use
Далее
DRY PACK SHOWER PAN For Beginners --- The Easy Way!!!
35:05
Vladimir Putinin Bakıda rəsmi qarşılanma mərasimi
13:06
How to Make a Shower Pan
25:06
Просмотров 3,1 млн
CONCRETE FLOOR SHOWER DRAIN
21:22
Просмотров 70 тыс.
Vladimir Putinin Bakıda rəsmi qarşılanma mərasimi
13:06