How to Build a Shrine of the Aquila for Warhammer 40k 

Nice observation about using the brands with well-bonded paper to avoid bubbling.

The imperium don't wallpaper their shrines, that's the dumbest fucking thing I ever heard. "In the grim darkness of the far future, there is papered wall"

@@ninjabastard666 What an absolutely toxic response to a helpful and innocent suggestion. Shame on you.

Ok but i'm not wrong.

@@ninjabastard666 Maybe not. But nobody likes an @rsehole even when they're right. And much of the suggestion still held good.

Oh man I just realized I lied at 17:05. That waste storage pit was from your channel! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-oZQBSXJzuTw.html

Rockin

The 9th Dungeons Productions ebay is a mush have when collecting even if you want brand new stuff you can grt it brand new for like 10-50% cheaper depending on if you are lucky

Libraries sometimes offer 3D printing. I have no license associated with the STL file above, feel free to have someone else print it even, for cost.

UPS stores now offer 3D printing services.

I would LOVE to do that, but I have no storage in my house for that, which is why I use mats.

Rockin! And thanks for the explanation.

Also the terrain isn't 100% representational of what it would be in real life, because it would make playing impossible. It'd be a giant balancing act of trying to get models to stay in place on top of ruins. Just take a look at photos from cities in WWII, like this photo of the SS HQ in Berlin: i.imgur.com/FDxgbI1.jpg The rubble is piled up along the sides of the building like sand dunes. Rebar, pipes, and fire escapes hang off the edges. Holes from mortars and artillery are large enough for a person to walk through. Modeling a terrain piece to look like that would be cool, but it makes it frustrating when you're trying to have models line up against the walls for cover, like they would in real life. Or when their movement ends on a slope. One thing you can do, however, is to make "modular" rubble piles for buildings. I.e. piles of foam, plastic, etc. made to look like ruins, but then give it a flat edge on the upright side. Then, you can place them in and around your terrain pieces to provide more realism, without making the terrain too bulky. Behold! A crude text illustration! Cardboard wall | ----> | |\ | | ____/``````\_____ | rubble pile goes \____ | in this area made from \ | flock and bits___________\____________ base made of cardboard /\ Goes up against buildings or between walls like this: _____ | ||\ | || \ | || ````\ |____||______\__

There ya go! Or perhaps some clear plastic (like from product packaging) and you either draw on all the arches, or cut them out of cardboard and glue them on.

Thanks for watching! However, I do not believe in 3D printed miniatures. Even upper-end printers and resin printers are unable to produce a result that is remotely close to the level of detail that I would consider acceptable. The technology is still a long, long ways away from that.

Wyloch's Armory I hear ya there thats why I try to look to more skilled people like tourself for guidance and examples of what I find intresting to print... I havent made many crafting vids lately cuz of my support to the local dispenceries for altenative medications in Pa bit in the next few weeks my gaming vids will start back up and I will invail alot of cool things to my viewers... I realy enjoy your videos and with your level of tallent Im always looking to you for insperation...

Yes, but it's a little trickier. Use about as much glue as you did for the flocking, since it's the PVA that is causing the bend in the first place.

I have, certainly could - or perhaps a CD case if you don't have a square.

Normangi "Ruined City," by Frontline Gaming Mats

The foam for the eagle head? It is extruded polystyrene, 1 inch thick.

Use PVA, simply "Bastelkleber"

I decided not to because it would take a long time, and be a LOT of unnecessary wear and tear on the airbrush.

Man I tried so many things but they all looked terrible. Think, thin cardboard strips bent to those shapes and glued together....very fragile.

UPS stores now offer 3D printing services.

That would would be very flimsy. I honestly think as 3-d printers come down in price we will see more and more 3-2 terrain and models on the table tops.

Try chipboard instead. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-nCP6tGBmCNo.html

Very true; I don't get into rabbeting on the channel because my shtick is cheap and easy, for the layman. But you're right a rabbet is certainly the best way to go. That said, I'm not sure a rabbet would even be doable with this very very cheap foamboard I'm using. Probably need the non-dollar-store stuff...

Sure, model is free to download in the description.

Immortal_Painting Custom. I guess they are closest to Leviathan?

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-VWWu9Ny8cW8.html

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-foQj8PDNF9w.html

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-srpNOjjt-3k.html

Thank you, but how did you make the 2nd image for 3d-ish effect? did you Photoshop their arms off? and then do the same as the mini?

Natasha Kakastan Correct, many of the models on their websote have a 360 panorama. You can find a good angle with the whole arm in view and chop it off in Photoshop.

capranger099 See the link in the video description

Thank you sir, Sorry I missed it! Was looking for a thingiverse link and completely missed the google drive one. Thanks for uploading it, just getting the printer warmed up for it now :)

Hmmm, just tried, works for me. Try again? - www.amazon.com/shop/wylochscraftingvids

Correct

@@WylochsArmory Is there any particular reason? On other craft videos they say to remove the paper as it's fairly easy to do with Ready Board

@@adriannaranjo4397 it is far stronger when you leave the paper on. Also this project doesn't call for it...building walls, smooth = paper

@@WylochsArmory Just wasn't sure, thank you for taking the time to answer my question

@@adriannaranjo4397 sure, any time, don't hesitate!

Monoprice Maker Select

This could make some great Killteam terrain!

I just clicked, and it worked for me...what exactly happens when you click it?

Says file type unsupported

@@josephlawrence6873 Then your computer doesn't have 3D model previewing software on it. Or your browser is trying to preview it. Right click and "Save As" to your desktop?

Ok thank you

This is an old video. These days I play GDF only.

The literal name from the label on the store shelf is cross stitch mesh

It's been like two years!

just about o.O

I would rather save 99% of my money and more importantly get the enjoyment of the scratchbuilding process.

Thanks