How to Make Volcanic Lava Terrain 

A next level painting tip on the lava -- mix a little silver or bluish gun metal in with the black. Freshly hardened lava has a bit of a glassy sheen to it.

An alternative method I recommend for doing the lava colors, start with reds - darker to lighter- then do oranges and finish with yellows. The idea being building your lava look from bottom paint layer to top.

You might want to consider shifting how to do the handle part, insert it from the underside and use it to add more reinforcement for the structure as you continue. Less of a potential issue due to it being cardboard for the structure. Possibly adding crushed scrap paper or newspaper to make it slightly more sturdy when you apply the sculptamold because that does add water to the mix and a more sturdy base for it helps...might also want to try giving it a dusting from a primer before the sculptamold if you're in a wetter area, it would help prevent potential issues with mold on the interior that could ruin the entire piece.

SUPERB work! Same technique reminds me of when I would have to apply a wash to my skeletons decades ago or dry brush weapon and chainmail metal. That black paint around the outer edges makes ALL the difference /thumbs up!

If you wait about 10 minutes after applying sculptamold, you can go back with a little water and make it totally smooth just by using your fingers. I use it in all my dioramas.

Making us wait is so painful Wylocky Horror Picture Show; "I see you shiver with antici..........pation."

Great use of inexpensive materials and tools. The use of real rocks is my favorite since they are so cheap and easy to find!

That was ace. Really striking terrain, gives me a few ideas of how to theme some scatter stuff for my sneaky ash-waste Orks :D

Great stuff! FYI, The depth of the sculptamold doesn’t effect setting time as its a chemical reaction and not evaporation (although it does dry a little further if left) so you can pile it up no problems

I love yer lava tutorial I am using it for my Hellscapes for Orcus an my demonic fire elementals.

Quick tip about open lava pools like that, they usually don't smoke that much, so the infinite height for line of sight wouldn't necessarily be appliccable. The smoky kind of eruptions, like subglacial or phreatic eruptions usually don't have that much flowing lava.

Great video, instructions for the painting were excellent. I'll be trying this one out today for sure!

Hope your hiatus is everything you are needing. You and yours are in thoughts and prayers across the world. This is a fantastic build!! I'm so excited to try these. Slainte!

Wow!!! You just saved my volcano!!! After a week of making a volcano waterfall I couldn't figure out how to make the lava look real. Thank you so much for this video! Your scene looked AMAZING!

I LOVE lava terrain and you did a SUPERB job Big Guy!!!! Love the over all look of the table!!!!

Great stuff! Thanks for posting this. 🙏

I made these and they turned out amazing! Sculptamold is my new go to. Great video and good job . Thank you!

Really well done Wyloch. One of your better ones, seriously.

Wait.... mechs fighting giant bugs in a volcanic area? INTO THE BREACH FLASHBACKS

Gorgeous lava work, this is inspiring!

As an extra painting tip, the striated ridges on the surface of lava are the coolest part. To replicate that, you can drybrush the next shade darker onto each place in the gradient, so light drybrush of orange over yellow, light of red over the orange, and then, of course, the glossy black onto the red.

I do love those cinematic shots you do at the end :D - just makes it all look so much better

Great video. Very striking. Worth the wait.

Truly superb work! I've been trying (and struggling) to utilize blending to mimic bioluminescence for my next vid. Your close ups of the process really helped! Thanks for another awesome tutorial, Wyloch!

Super cool idea. Made me feel super inspired to make my own

Nice work maybe a little gloss Mod Podge to give the wet look on the Lava??

Great video. I love the way that wet blending came out. Looking forward to the next batrep

Major props. Your work is always educational and amazing. Doing the scatter terrain on my kelpie stable. As soon as I finish I will figure out how to send you some pictures. I would like your opinion on the whole set.

SebTheis would be proud of all those knights.

very nice! looks like a fun table!

That's sweet! Killer looking lava effect.

Here is a tip I discovered by accident. Test out Gorilla Glue White Pen. When you spread it out it foams up and drys hard with a oozing appearance. It actually acts like "expanding foam", just in miniature scale.

Awesome build, thanks for all you do to contribute to the hobby. I always look forward to your videos. 😁 As others have suggested you can try making your own, or if you don't want to, and want to support another Crafter in the RU-vid family, Luke's APS does produce some commercially and has shops that have his products located in the USA and I believe Australia, and for sure in the UK where he is based. I know you all are always trying to help one another out which is one of the things I really love about this community....it actually feels like a community of interconnected people. 😉 Thanks again for sharing with is and all your awesome ideas! You're awesome!

Nice work. Sculptamold is awesome for sure. Cheers, John...

So beautiful! Another craft to add to my Avernus to do list!

Amazing techniques definitely going to give it a go 😱

Hey Wylock great video! I actually just did a lava themed table about a week ago and hit the same problem you did with the colors. I solved it the same way too except the very center I painted a yellow/white mix and was super happy with the outcome.

Thank you for showing how to set blend!

It's so awesome!!!!!

that's awesome! I have noticed the "not really black" black spray paint thing before, but if you use krylons camo line with the ultra flat black it's a nice true black

Looks great!

Ok so let me try again lol. _"Here is my experience"_ : This stuff was REALLY easy to work with but what I found was the Sculptamold can puff a little as you're scooping it up, putting it in the cap and mixing it so I would advise wearing a mask just until you got it properly mixed. Rubber gloves are great too as you can still feel the texture. It's a bit like porridge. I can confirm that the 2 parts SM and 1 part water is SPOT ON! It was PERFECT consistency the first mixing but on the second mixing I got a bit over confident and went 4 parts SM and 2 parts water. As Wyloch said it does start to harden a bit after about 5 mins so stick to his recommended amount (small batches). I was using a wooden party spoon to spread it around initially but just ended up using my fingers (it was easier for me to sculpt) and it gave it a more bulbous texture. You may find edges which have a thorny edge as you lift your tool or fingers off the mold. You can easily pat it down lightly or even after about 10 - 15 minutes if you dab a little water on your finger. It smooths out REALLY well. I don't know what kind brushes were used in this video but I just bought some bog standard kiddy craft brushes. As I was painting the black acrylic onto the model I notices some tiny boulders would come off but I might have been painting too aggressively. I later dabbed a drop of water to each squeeze of the acrylic paint and mixed it and it made it go SOO much further. Tomorrow I shall ad the greys. Hope I don't mess it up /fingers crossed Here is a link to the progress so far: imgur.com/gallery/first-amaco-sculptamold-sculpt-1-mHlbg7K

I'd be interested to see what these look like with lava bubbles. Great work!

Awesome result - got to have a go at that blending👍🏻 thanks for another excellent vid - off to your chemical spill next!

Great tips how to wet blend. Thank you Sir! And I love those modules that I got from You! Really not typical hack'n slash, but you also have to think. I love those :-)

For the technique you used for the volcano, you might consider filling in much of that space with crumpled balls of paper. It gives you a nice gross texture. And instead of PVA and paper towel, you might want to try paper and hydrocal. Model railroaders call this "hard shell terrain", and it's easy, quick, light, and durable as a base to do your final surface texturing. Works for more lush terrain as well.

I really liked those - very nice!

Will be doing a volcanic board down the track. Really like the ideas here.

Great video! Going to use this for Star Wars legion terrain!

I just found this video & your channel today - subscriber now. keep up the good work :)

Epic - as always 😉👍

I did not do mine perfectly but I have completed seven different lava terrains!!! Thank you for this "How to"!!!!

Great Build!

Paiting skill increased big time!

Fantastic!

looks amazing

This is inspiring! Very nice :)

Perfect timing, I'm just about to do a lava board :)

Like the blending lava affect, some porous black rock and darkening around the lava flow as contrast may give a more realistic look. For game table these look great.

Epic!

awesome!

Thanks for the Lava lesson! I'm ready to try it out! And that lava plume! Wondering if I could use the paper mache method (newspaper + elmer's glue) for the lava domes as well in lieu of the sculptamold? Although I did like how sculptamold looks on your model. I might give it a try and see.

Great video! Ive always had a hard time crafting rocks as i tend be too uniform with my cuts. This is going to help me out immensely with my dioramas, any tips for making still water and waves?

BADASS

Excellent glow effect on the lava there! Have you considered applying it to a blacksmithing or industrial setting where it could work as molten metal?

12 people were just too lazy to cut out their own Volcano. great vid dude. Thank you for what you do

volcanic chimneys like these are usualy found in inside an active crater . sometimes near lava lakes BUT they are quite rare also they emit smoke , gas and sometimes small droplets of lava . . . . and very rarely lava overflows I know of ONLY a FEW cases of overflow and most of those happen on only one volcano

I advise using a dark brown drybrush between the red and the black

Amazing as always. You should check out the new FW chaos War Dogs, sooo good.

Great!

The table set up at the end looks awesome (made better by the appearance of a few Genestealers of course ;) ...I really must get my own 'stealers painted up at some point).

Can you do modular volcanic dungeon tiles. Please. Expand on the early ones. Maybe a tile that is half stone half lava. Or a field tile with a volcanic crag built into the tile

0:43 when you get into the dank weed

This with a slight tweak would work so well for khorne terrain, instead of painting the lava like lava use GW's Blood For The Blood God and hey presto blood flow rock formations

@wyloch’s Armory I would have suggested a clear coat around the lava to a. Give the blend a cool effect b. To also give a more glowing surface. Is there a reason you would suggest otherwise? (Very New to this)

You should try "Gaps and Cracks" foam

Hmmm am going to make a Hot Wheels dinosaur mountain for my grandson am thinking a lava field will be a nice touch. Great job thanks.

lol you didn't wanna wait 24 hours for the DMscotty slurry to dry so you waited 48 hours for the sculptamould to dry lol just givin ya hell man cool video

I make my own scultamold from equal parts plaster and papermache material from the local dollar store. Costs about AU$5 for a kilo of scultamold. Also, great build!

How did you make the ribbed pauldrons on the dark Imperial Knight? Thanks.

You can smooth out sculpt-a-mold by working it while it dries. See Luke Towan’s videos. He uses it a lot.

Great vid as usual. Is there another sub for sculptmold?

I just ordered that putty from Ebay just now. Although the texture in this video is PERFECT for my current woodworking project, can anyone give me tips on creating a carved stone texture rather than the randomized jagged ones in this video. The reason being is I would like to do a hybrid of the two. Something like King Thrain's throne in _The Hobbit_ films. Natural rock formations blending into straight cut geometries.

I wanne make a lava gaming board with a few stone pillars in it. What is a good thing to use to make the lava, hot glue is not so handy because the board is pretty big.

Next time you paint lava try starting with a dark red as your base. then go from a lighter red, to orange, to yellow

Why not use some newspaper or something to add bulk under your sculptamold?

his hands are always clean! how do you clean you workstation? this was a messy vid, haha

You should check out Chest of Colors website on how to do lava splashes. When I have some free time I'm going to try and perfect what they did myself for my gaming table as I enjoy volcanic areas to game on.

I messed up! I didn't glue gun the lava so when I painted on the yellow (no water) it picked up the black from the surface and went dark. I carried on but have to wait for that layer to dry now to act as a base for the next coat. DOH!!! :[

Мне порравилось видео поставил лайк Но для себя решил что пена полистирол и шпаклёвка и эпоксидный клей будет проще использовать

6:51, looks like baked mac n cheese! :D

Awesome as always. I am surprised you haven’t tried to scratch build knights. (Did that get you thinking?)

How much Sculptamold did you use for this scatter? Luke's APS was using it, but developed his own version due to the volume he required.

10:41 "OH CARP!" cut

What is the difference between drybrushing and overbrushing?

Nice video Wyloch's Armory :-)

@10:41 The strut was coming away from the base. Whoopsie!

OMG I hate YT! I wrote a massive detailed synopsis of my experience using this (ALL positive) and after refresh it's no here. I got a feeling it's because I mentioned I refused to buy it from Amazon lol

Should have used some fire elementals demons .