In this video, I’ll show you how to build a beautiful entry table with storage.
This style is based off of a $13,000 design Lynde Galloway. I loved the design but I made it a little smaller to fit a standard size entryway. In total I spent about $300 building this table, so I technically saved sooo much money, right?
I hope you enjoy building this entry table with me!
Grab the plans here:
www.builtbybec.com/post/entry...
Follow Built by Bec on
Instagram / builtbybecdesigns
Tools and materials
*affiliate links below
Tools
- Drill urlgeni.us/amzn/ln9Hp
- Circular saw/table saw urlgeni.us/amzn/yyIHq
- Pocket hole jig urlgeni.us/amzn/nLCM2
- Jigsaw urlgeni.us/amzn/APX_b
- Taper jig (optional)
Materials
- 1 x 24" x 6' edge glued pine project panel (3) or 8' x 4' x 3/4" sheet of plywood (1)
- 1 x18" x 6' edge glued pine project panel (1)
- 2 x 2 x 4' pine (4)
- Wood glue urlgeni.us/amzn/8kIb8
- Figure 8 fasteners urlgeni.us/amzn/mhNyI
- Rustoleum Universal Satin Paint & Primer in one urlgeni.us/amzn/iKnJR
- Rustoleum Milk Paint in Eclipse urlgeni.us/amzn/XnKSt
- 1/4" x 2' x 4' plywood sheet
- 1 1/4" pocket screws (50) urlgeni.us/amzn/iD1lx
- Inset door hinges (4) urlgeni.us/amzn/mKM3C
- Drawer slides 10" (4)
- 1 1/4" screws (2)
- Hardware of choice
Chapters
00:00 Introduction
00:27 Making tapered legs
03:13 Making the curves
04:53 Installing the top with figure 8's
05:18 Installing the doors
05:44 Building the drawers
09:00 Painting
10:50 Installing the hardware
28 июн 2024