I stuck the magnets on the rotor according to the instructions in the first part, like this: 6 rows of magnets N/S, N/S, N/S. However, the result was not satisfactory. On the main coil we obtained a voltage of 38V and a frequency of 72Hz, and on the secondary coil we obtained 4V. Inserting the two coils, I finally obtained a voltage of 38.4V.
Following a message received from Mr. Nelute5, I decided to try another option in the third part of my project, as Mr. Nelute5. I will fill half of the rotor with N-polarity magnets and the other half with S-polarity magnets. I hope this change will lead to better results.
If you are interested in this topic, please subscribe and give a like. Thank you!
1 сен 2023
