How to Build An In-Ear Monitoring System - WITH a Presonus Studiolive 32r (NOT a Behringer X32)

Подписаться 14 тыс.

Просмотров 30 тыс.

50% 1

WIN FREE GEAR!!!
sweetwater.sjv.io/y2mAxv
BEST DEALS ON GEAR!!
sweetwater.sjv.io/Py6EqX
I went up to #sweetwater and picked up our new In-Ear Monitoring System using the PRESONUS STUIO LIVE 32R and want to show you How to Build An In-Ear Monitoring System.
Everybody uses the Behringer x32 but I decided to try something different.
Check it out
#stevekinney #inearmonitors #presonus #monitoring #PresonusStudioLive
👉 LIVE RACK GEAR:
Roto-Molded Shockmount Rolling 12U Rack Case sweetwater.sjv.io/nL20Y6
Presonus Studiolive 32r sweetwater.sjv.io/6egrmK
Tascam US-1608 Interface sweetwater.sjv.io/21WxZz
Sennheiser EW-500 G4-Neumann KK205 sweetwater.sjv.io/3edDgK
Sennheiser XSW IEM Wireless In-Ear Monitor System sweetwater.sjv.io/R56v79
Shure PSM300 Wireless System sweetwater.sjv.io/da71YM
RF Venue Combine 4 Antenna Combiner sweetwater.sjv.io/MmN67J
Pearl Mimic Pro Drum Module sweetwater.sjv.io/m52WYe
Westone Audio Pro X20 Earphones sweetwater.sjv.io/LXZb7j
Shure Beta57 Vocal Mic sweetwater.sjv.io/Qy6mkP
Rack Drawers sweetwater.sjv.io/rQ265Q
Timestamps:
0:00 Our Surprise Visit
2:44 What are rigs like this built for?
4:15 What we wanted in a rig...
5:04 What's in our right & What you'll need..
7:01 Honorable Mentions...
8:47 The Signal Flow..
10:06 Farewell.. kind of..
SUPPORT THE CHANNEL
👉 My UA PLUGIN PRESETS thestevekinney.com/
☕️ Buy me a coffee- bit.ly/3yXUxjp
🔔 SUBSCRIBE - / thesteve. .
WORK WITH ME {Music Production, Mixing, Mastering and One on one mentoring}
stevekinney.one43@gmail.com
IG & FB @thestevekinney
www.thestevekinney.com
#stevekinney #UniversalAudio #LUNA
USE MY LINK TO GET $50 OFF LANDR STUDIO HERE bit.ly/3kURJkl & GET:
🔸Vocalign Project 5
🔸Unlimited Distribution, keep 100% of royalties
🔸36 WAV Masters/YR
🔸MixBox SE
🔸Arturia Rev PLATE-140 & more!
----- ALSO WATCH -----
🔸 LUNA Basic Series- Part 1
• Universal Audio Luna B...
🔸 UAD Console deep dive | Apollo solo
• UAD Console deep dive ...
🔸 I Produce Songs With EZDrummer
• I Produce Songs With E...
🔸 Hybrid Mixing with Luna & Logic
• Hybrid Mixing with Lun...
🔸 UAD DSP LIMIT EXCEEDED
• UAD DSP LIMIT EXCEEDED...
🔸 Building a FULL SONG start to finish in UNIVERSAL AUDIO LUNA with the APOLLO SOLO pt 1
• Building a FULL SONG s...
-----
👉 MY GEAR LISTED BELOW 👈
👉 DESKTOP DEVICES:
Universal Audio Apollo Twin X DUO Thunderbolt 3 sweetwater.sjv.io/q42bMj
UNIVERSAL AUDIO APOLLO SOLO sweetwater.sjv.io/xkN4MA
Solid State Logic UF8 sweetwater.sjv.io/Qy6mDM
Solid State Logic UF1 Advanced DAW Controller sweetwater.sjv.io/jrOobv
Presonus FaderPort Production Controller sweetwater.sjv.io/k0oB6n
👉 MY 500 SERIES GEAR:
Solid State Logic VHD+ sweetwater.sjv.io/nL2056
Purple Audio Action Fet sweetwater.sjv.io/6egrYK
Ironage Audioworks QP5 www.ironageaudioworks.com/
XQP 2531 www.xqpaudio.net/
XQP 535A www.xqpaudio.net/
👉 MICROPHONES
Warm Audio WA-47 Large-Diaphragm Tube Condenser Microphone sweetwater.sjv.io/vNZRJd
Aston Spirit sweetwater.sjv.io/4PWQv9
Shure SM7B Cardioid Dynamic Microphone sweetwater.sjv.io/da71MM
AKG P420 Studio Condenser sweetwater.sjv.io/y2mdXV
Shure SM57 sweetwater.sjv.io/Y9yQMJ
Shure Beta 52A sweetwater.sjv.io/KjZnMn
Aston Halo Portable Microphone Reflection Filter sweetwater.sjv.io/m52WPe
👉 HEADPHONES
DT770 Pro 250ohms sweetwater.sjv.io/ZQy97q
Sennheiser HD280PRO sweetwater.sjv.io/JzmE7R
HD9 PRESONUS sweetwater.sjv.io/Vm6q7A
AKG Pro Audio K240 sweetwater.sjv.io/eKAVYr
👉 SOUNDPROOFING- Auralex
ProMAX v2 Portable Panels bit.ly/334kZvJ
ProPanels bit.ly/3DFI2tx
StudioFoam Wedgies bit.ly/3oE4Jd7
ProPOD Acoustic Decouplers bit.ly/3pLeJ3B
Studio6 Bass Trap bit.ly/31QlPvm
👉 CAMERA & FILM
SONY A7C amzn.to/3DACuAB
Wireless Lav MIC sweetwater.sjv.io/XYXD7o
👉 LIVE RACK GEAR:
Roto-Molded Shockmount Rolling 12U Rack Case sweetwater.sjv.io/nL20Y6
Presonus Studiolive 32r sweetwater.sjv.io/6egrmK
Tascam US-1608 Interface sweetwater.sjv.io/21WxZz
Sennheiser EW-500 G4-Neumann KK205 sweetwater.sjv.io/3edDgK
Sennheiser XSW IEM Wireless In-Ear Monitor System sweetwater.sjv.io/R56v79
Shure PSM300 Wireless System sweetwater.sjv.io/da71YM
RF Venue Combine 4 Antenna Combiner sweetwater.sjv.io/MmN67J
Pearl Mimic Pro Drum Module sweetwater.sjv.io/m52WYe
Westone Audio Pro X20 Earphones sweetwater.sjv.io/LXZb7j
Shure Beta57 Vocal Mic sweetwater.sjv.io/Qy6mkP
Rack Drawers sweetwater.sjv.io/rQ265Q
👉 DEVICE STORAGE
OWC Express 4m2 bit.ly/30rlgrm
OWC THUNDERBOLT 3 DOCK bit.ly/3DitdOe

Опубликовано:

3 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 108

@SOLDbyYOU Месяц назад

Four minutes in to the 10 minute video and we STILL haven’t gotten anything but a goddam commercial for sweetwater

@TheSteveKinney Месяц назад

You need to chill out. haha geeeeze. Enjoy the ride.

@SOLDbyYOU Месяц назад

@@TheSteveKinney thx but I don’t have time for videos that don’t deliver

@pamelak.4794 Год назад

O M G What an amazing trip that must’ve been for you & Kat! Sweetwater ; Whaaaaat? I am surprised you didn’t set up a tent right there in the lobby! I know without a doubt, you were in your Glory ! Congrats on another super informative video. Also, the picture/video quality is amazing!

@TheSteveKinney Год назад

MAN THIS RIG IS KILLER- I can't wait to share more on it.

@katrina_burgoyne Год назад

Well done Steve!

@christianbaxter_yt Год назад

Look forward to hearing about why you chose personus vs x32, been a fan since first SL series because of capture and I love the simplicity of their interface vs x32.

@TheSteveKinney Год назад

@@christianbaxter_yt ya - I’ve been really trying to wrap my brain around capture. Love it. Works awesome!

@katrina_burgoyne Год назад

I love the Microphone you picked... WOW!

@barnpostmedia Год назад

It's hard to go wrong with Neumann.

@RussellBobel Год назад

Looks like I got my travel planned for next year! Awesome vid, appreciate the info. I've always wanted to stop by sweetwater HQ.

@TheSteveKinney Год назад

It’s well worth it! Pedal wall is nuts!

@kaleboverby426 10 месяцев назад

I built an almost identical rig to this! Thanks for the guide! The band, the sound guys love everything! I decided to go with a Roland TD-27 but I use it with Superior Drummer 3 through Ableton

@TheSteveKinney 10 месяцев назад

SD3 sounds like life. great stuff! cheers!

@aplica6006 Год назад

Wonderful! Cheer from Sweden! =)

@timdaniel7745 Год назад

Hey brotha….this is just great I’ve been lookin for a RU-vid video about this for a band I work with and it’s really hard to find a good, clearly explained video and I am glad to finally see this video great job hope to see more amazin videos from you cheers brotha…..✌️

@TheSteveKinney Год назад

Thanks dude! Anything specific you couldn’t find on the live rigs? I’m still working on someone of my follow ups.

@timdaniel7745 Год назад

Well nothing specific…well I wanted to do know about the multitrack recording of a live performance and the live mix with the digital PC well I have seen people use it but never known how to do it well, it will be pretty Good to see a multitrack live recording….🤔

@scottproaudio 23 дня назад

Great video Steve! Best wishes to you Kat and Poppy.

@TheSteveKinney 23 дня назад

Thanks mate!! Cheers!

@mickellyrodrigues2191 9 месяцев назад

Finally..... this is such a bloody good mixer so much better then the behringer

@TheSteveKinney 9 месяцев назад

It’s great! Behringers got its perks, but this one has more for sure!

@cpt.kimintuitiondemon Год назад

Very interested to hear all about the presonus for this purpose!

@jmac6832 Год назад

As a professional rack builder and past experience with Seismic Audio, I hope that you have better luck than everyone else has. I would have gone with a CBI Ear Splitter. Better build quality at a good price and never had an issue with them.

@TheSteveKinney Год назад

I'm going to have to take some time to look into them, thanks for sharing mate!

@barnpostmedia Год назад

I just told a few of the guys at Sweetwater that I am planning a trip to visit the greatest music retailer in the world. I can't believe you two beat me to it.

@TheSteveKinney Год назад

Dude. Da fuq. If you going. I want in haha My brotha Daniel is there! And it’s a great time!

@barnpostmedia Год назад

I will let you know when I am headed up there. You are more than welcome to come along. We can take over Fort Wayne 😈

@MariusDanielsen 9 месяцев назад

Could you do a video on how to do a good monitor mix? With effects and EQ, compressor etc. I own the same Presonus 32R, but I haven´t been able to start really mixing the monitor mix other than panning and volume.

@TheSteveKinney 9 месяцев назад

hmmm... that's a tricky one because it's so subjective.. I could probably do a general breakdown on routing etc. there IS a special technique for monitoring vocals for each singer that is not commonly known.. has to do with what essentially amounts to phase cancelation from your small inner ear bones vibrating while singing. I've got a lot of random videos to follow up with... TON of work haha. If you'd wanna fast track something like this, I'd be happy to do a 1:1 session an answer specific questions, and even screen share the mixer software to show you what I've done etc.

@XIIMonkeysMusicGroup Год назад

Sounds like a Sweetwater ad!

@TheSteveKinney Год назад

🤷‍♂️ sweetwater is awesome. But. I actually bought all the gear in the video 😂 so. Nope. Didn’t make the video or sweetwater or presonus. Genuinely made this for all.

@simpleObserver100 8 месяцев назад

Thanks for the vid. I am researching IEM rigs.and am thinking about the studio live 32r. Waiting for the vid that you havent made yet video explaing why you chose it...

@TheSteveKinney 8 месяцев назад

That video is plaguing me. Haha I never at all intended to take so long to follow up, but client work, major releases etc - I’ve been pretty side tracked. It’s actually on my list of things to film this week.

@simpleObserver100 8 месяцев назад

@TheSteveKinney no worries, man! I'm looking forward to it!

@maxaguilar6523 29 дней назад

Question…for the multi tracks you can use the same mixer to send it? Why the reason to use a separate interface?..the rack looks amazing pretty sure you cover any place you play!

@TheSteveKinney 27 дней назад

I chose to use a separate interface as a redundancy. I could have easily used the USB functionality of the mixer itself for sure. But I also plan on recording every show, and I just didn’t want it doing too much. We have a tracks computer that triggers everything from ableton. And then we have the computer that controls the mixer & records into presonus capture.

@danlosd 3 месяца назад

Those seismic splitters are hardwired transformerless inputs wich means if you are using phatom power that voltage goes directly to the other mixer. Are you using condenser mics? And have you had a problem with voltage leaking to the other console? I know this can fry the input of a mixer

@TheSteveKinney 3 месяца назад

I don’t use phantom with it. For that very reason.

@jwillydrums9982 Год назад

For my band we usually play at festivals and this would benefit for sure but, would it be to stressful to ask engineers there at those festivals to redo their stuff when they have other bands going on and off? That is the only thing I'm questioning because of course they would have to unplug the things they had.

@MegaUltimateHD 10 месяцев назад

The best way to go about it would be to be as self contained as possible. For example: we run our own stage boxes and looms, We run our own vocal mics and we have a 24ch xlr snake with every channel clearly labelled on their end of the snake

@spoonracer1111 5 месяцев назад

Not stressful to engineers at all with a splitter snake, with a splitter snake your completely self contained and all they have to worry about is the foh mix

@daniellarkin9945 Год назад

I enjoyed this video and planning on a similar build and I wanted to know what's that "thing" with the bristles just below the 24R? I assume it's to keep the dust out???

@TheSteveKinney Год назад

32r 🥸 ha but who’s counting channels. and ya - it’s just a 1U rack passthrough. A lot of peoples rigs are just gross as shit with their pass throughs just being a mess and rather than having an odd empty spot in the rack or a weird panel with a hole drilled out, I opted for this. Keeps it clean, and helps with the dust but allows access if I need it. Cannot stress enough how important smart cable management is. It’s worth spending a few days on it. I’ve still gotta make my follow up video on why I prefer the presonus over beringer.

@daniellarkin9945 Год назад

@@TheSteveKinney I'm really looking forward to that one! I just got my case and buying the 24R today! Thanks Steve!

@mooses21 Год назад

This video is about building a live rig with a split for IEMs. Your solution for IEMs was to use the wireless IEMs you already had.

@TheSteveKinney Год назад

I had 1 wireless unit already. The rest had to be picked up. And this entire unit is truly for IEM. The split is what’s used to go to FOH. The mixer is whats used to build the IEM mixes for each person..

@salsanvazquez 7 месяцев назад

are you able to close the enclosure with everything plugged into the 32r?

@TheSteveKinney 7 месяцев назад

Yup. Tons of clearance on the back, and good clearance on the front. None of the cables that I’m using are getting pressed up against the front cover. It’s close, but they aren’t getting smooshed. If I used higher end cables that had L connections, I’d have about 2-3 inches of clearance.

@HarryAdee 3 месяца назад

Most music store in our country won't let you try or even touch any instrument😂. How to know what you would buy?

@brett-westgrove-country-music 9 месяцев назад

Awesome rig! Love nerding out on these setups - so many variations. One thing I notice and question: why are so many people running a digital mixer AND an audio interface, when the mixer should work as both (I’m assuming your mixer has the same basics abilities as a Behringer x32r)? I know you already owned yours, but it’s seemingly extraneous… For example: my X32r runs 18-20 stage inputs from my split, and another 6-8 channels of click/cues/tracks via usb straight from Ableton into the X32 (so it feeds internally, no extra patch cables needed) and on to iems and externally to FOH - so it doesn’t use up any extra hardware inputs on the X32 for tracks, and those sources never touch the splitter (plus it can record 32 channels of raw audio multitracked to SD card - which is not super relevant, but still with no extra interface - which I think just goes to show that the horsepower, capabilities, and flexibility these devices have is not well known Anyway, for the sake of weight, space, maximizing the number of available inputs, and quite a few fewer cables I’d say definitely look into the Presonus’s abilities! I’d be very surprised if it wasn’t capable of all of that (aside from the SD card multitracking, which requires an expansion card on the behringer)! 🤘🏻 PS: Still liking that shock case? Been thinking of switching to something similar - wondered how it hold up! Anyway, Thanks again for sharing

@TheSteveKinney 9 месяцев назад

Thanks mate! As a matter of fact - the interface is kind of on the redundant side cause you’re right - this mixer can get direct feeds from a session. But truthfully, I like the idea of redundancy. Sometimes software is stupid. So I have two laptops if I need it. One to control the presonus and / or record the show. Don’t want it doing anything else. And then the other sends audio via interface. Additionally, the one that’s recording is mainly a convenience and not always used. Side note - the road case is awesome. Holding up nicely. If I could tell the manufacturer- I’d say, make the handle out of something else, it’s strong but makes me nervous for years of use. But at the same time. It’s only ever used for seconds at a time. Haha 😆 I just know how this stuff gets abused.

@brett-westgrove-country-music 9 месяцев назад

@@TheSteveKinney nice, that’s very fair! I have redundancy in the form of two computers, but they both do the same things (one is just a backup in case the other fails) - different approach. Also, tbf, I did have to upgrade to a more powerful MBP this year but that’s mainly because the one computer also does ProPresenter video and lighting. It’s a lot but the M1 Pro is a beast! I have a generation older SKB 8U (power conditioner, split + aux XLR panel, x32r, router, USB hubs and video output, DMX device, and sennheiser wireless mic) and a SKB 4U stacked on top (drawer (packs, battery charge station, iems), iem receivers) but they are not shock mount =\ Plastic roto cases take up some shock but not like yours does!! But the handles are molded in to the rack(in fact, they are large and hollow and even helped with cable routing!) - they are beefy! Can’t believe they went with the handle style you’re complaining about… I went to the link you posted to look and I could definitely see those breaking with heavy use. Too bad - go back SKB!!

@brett-westgrove-country-music 9 месяцев назад

@@TheSteveKinney PS, just noticed you’re in Nashville. Let’s grab a coffee and chat!

@TheSteveKinney 9 месяцев назад

@@brett-westgrove-country-music hit me up on Instagram. @thestevekinney

@davebrownentertainment7191 Месяц назад

A year later, how do you feel about your 32r? I had the 24r and 32sc, wasn't super thrilled with them. Have a Midas MR18 (nicer version of the XR18), and love it. Need more channels now, so I'm looking at options.

@TheSteveKinney Месяц назад

I love the board. I only have 1 problem with it. What was your gripe when the presonus boards?

@davebrownentertainment7191 Месяц назад

@@TheSteveKinney The AVB networking was unreliable (would sometimes take several reboots before the 2 mixers communicated properly, then they were fine, whish is stressful when you have a recording client on their way over), The user interface was confusing, more complicated than it needed to be. On the MR18, with Mixing Station, everything is so simple, easy to find and navigate to. The MR18/XR18 mixers have more effects (51 I think?). I dunno, I may still end up getting a 32r, for the form factor (32 channels, boom), but not looking forward to setting up monitor mixes. Lol. Oh, and I'll need adapters for the aux outs (1/4 inch, vs XLR on the Midas/Behringer). What was your problem with the 32r?

@TheSteveKinney Месяц назад

@@davebrownentertainment7191 see, I actually much prefer the user interface on the software. And I like that the iPad app is the exact same as the desktop app. For me, I had no issues there. My only, and truly only gripe is that AVB is essentially a dead protocol. Very few devices interface with it. If they through a firmware update to make it Dante it would be damn near perfect. I prefer that it has modeled eq and compression across every channel, I prefer the way it can flex route on 16 busses PLUS a main left right output. The software has been nothing but reliable for me. Granted, I haven’t used the avb to slave to another board, so that may still be a thing. But - ultimately, I just felt the Midas and behringer to be a bit limiting for the money.

@brianhainey9452 Год назад

Hey Steve! Where is the explanation video for why you selected the 32R? I too, chose to use the Presonus 32R as my main mobile mixer. And I'm super interested in hearing why you WISELY chose the 32R over the X32. Can you send me that link where I can watch that video? ??

@TheSteveKinney Год назад

I still have to finish making it, it sounds crazy - but a bunch of client work kind of took over right after I made this videos and haven’t had a chance to follow up.

@brianhainey9452 Год назад

@@TheSteveKinney No Worries! Being busy trumps everything:)! Youve got some awesome videos, and you've got people awaiting your next gig vid!!!

@kenpoels 5 месяцев назад

Are you still planning on making a video about why you went for the studioiolive 32R and not the berhinger X32?

@TheSteveKinney 5 месяцев назад

1000%.. I’ve had a ton of life changes over the last few months. Moved out of my apartment, live in Australia for 2 months, closing on a house. I should be free to make a follow up video in the next month now that I’m moving back in.

@kenpoels 5 месяцев назад

Im looking forward to the video! I wish you the best with everything that is going on in your life! Ty for the response!

@jodiminopoulos5206 Год назад

Hi Steve, 1st off my husband and I love your rig. So much so that we replicated almost exactly, we needed 7 IEM so it little bit more full. We haven't used it in jamming session yet because we literally just finished plugging it in and testing it out. 2nd we are hearing a lot of white noise, regardless of where we plug in, straight into the Presonus, straight into the IEM transmitter or into the IEM receiver. Did you have this problem also. Any suggestions on how to fix.

@TheSteveKinney Год назад

Hmmmmm. Without being there and following the cabling - it would be hard to totally put my finger on. But it’s likely either: 1. Wireless interference - if you don’t have a paddle antenna - it very well could be that. 2. It could be that signal levels inside the console are too low and now you’re turning up pack volumes super high to compensate. 3. Cables - if you are using unbalanced TS vs TRS ... albeit this one is a little more of a stretch, but it’s still a possibility. I don’t get darn near any sort of white noise, unless I’m getting wireless interference. If you have the XSW’s, Do you know how to search for open channels?

@jodiminopoulos5206 Год назад

@@TheSteveKinney thanks for the suggestions Steve. Saddly couldn't afford xsw. Went with phenyx pro iem and microphones. Both wireless units have channel frequency adjustments, so maybe just need to play with around a bit more. Early days. We really appreciated your video. Look forward to hearing how you're experience with the presonus is going and any tips and tricks. Cheerio from Australia down under.

@TheSteveKinney Год назад

@@jodiminopoulos5206 oh right on mate! Australia, my people! Cheers! Ya - I’ve really enjoyed the presonus. I’ll have to find some time to make my video on it. It’s a great unit. Far superior than anything else out there, short of spending “inquire for pricing” money. Ha ha

@AnthonyWatsonMWArts Месяц назад

Love your rig. I'm going to do something similar now. What antenna did you connect to the RF Venue Conbine 4?

@TheSteveKinney Месяц назад

The system I bought came with the paddle antenna. If you go to my website, it should list all of this gear exactly as I got it. And also the description should have the links to the exact stuff.

@TheSteveKinney Месяц назад

If you’re going with seismic audio for the snake split, the only thing I wish I did differently was to get a snake splitter that could handle phantom power. Talk to them directly and they can get you the best one.

@AnthonyWatsonMWArts Месяц назад

@@TheSteveKinney Thanks for mentioning that. I just assumed (always a bad idea) that the phantom power would "carry forward." Appreciate your help.

@TheSteveKinney Месяц назад

@@AnthonyWatsonMWArts there is ways around it. The reason I have the one I do is because i got it on a great deal from a buddy who used it in his rig. You can get the triton audio inline phantom power plugins. You put it between the mic and the mic cable. And then bam. It’s safe. Or you can get a specific one from seismic that is made for this sort of thing.

@OfficialDSFN Год назад

Daniel was my guy too! Sadly, he’s not there anymore :/

@mirandazohran 2 месяца назад

Hey Steve, how would you rate the Allen & Heath CQ-20B or the CQ-18T for this very same purpose :)

@TheSteveKinney 2 месяца назад

Allen and heath is great stuff. I don’t think they are comparable though. This is a 32 channel rack mixer with 32 preamps, with 20 physical outputs. The Allen and heath has 16 pres and looks like about 10outputs, depending on how the routing in the system works. Now. Sure, for that size, the pres and everything is gonna work great, so if that size channel count will work, then it’s gonna do a great job. However, the channel count is extremely limiting if you’re trying to do playback tracks, live instruments etc with different stereo IEM mixes for everyone in the band. Not saying it wouldn’t work, or that it’s bad. Just that it’s a smaller package. If I had the option, I’d be rocking this one.

@mirandazohran 2 месяца назад

@@TheSteveKinney Absolutely , you are right , whats your view of soundcraft options? Big amateur right?

@TheSteveKinney 2 месяца назад

@@mirandazohran truthfully, Most of these live sound mixers sound pretty nice, unless you’re going with the really cheap options. No way around the cheap components in the tiny mixers. But the bigger mixers are usually decent.

@alannoruspur5315 23 дня назад

What did you do with the antenna from the Sennheiser EW-500 (the microphone receiver)? The way I understand it, it's not possible to connect that to a combiner such as the RF Venue Combine 4 which you use with the IEM transmitter. This is confusing me :/

@TheSteveKinney 23 дня назад

That antenna is certainly different. It’s a receiver. The mic itself is a transmitter. Whereas the IEM packs are the receivers. The only think I did use was the power supply from the combiner just for simplicity in the rack. That particular unit has an AMAZING built in antenna. It can scan for open channels super easily; never once ran into any sort of trouble with it yet. The iem’s themselves, the xsw’s - they sound great and work awesome with the combiner. Don’t have any issues there. I just wish I got a better unit so scanning for open channels was easier… that’s a manual process so if your short on time.. that would be a pain. I haven’t run into an issue with not having an open channel, but still, lol manually looking is a bit tedious. Hopefully this helps ya out!

@alannoruspur5315 22 дня назад

@@TheSteveKinney Thanks for the reply! That's a bit strange. I could not find any information about an internal antenna in the microphone receiver. According to the manufacturer's website, the Sennheiser EW-100/300/500 Microphone Receiver is a True Diversity system that uses two antennas on the back and should not be connected to a combiner. I believe you when you say that it's working for you, however technically speaking, I don't understand how it could work in case you aren't using any of the two small antennas that came with the unit and have the receiver connected to a combiner (which you aren't supposed to do, even just to power it up). Please don't get me wrong, I'm not trying to tell you what you are supposed to do. I just wish it would be possible to build a rack with both IEM transmitters and instrument receivers but the only way that's possible is if you use external antennas which are spaced apart. Otherwise you run the risk of intermodulation and instability of both systems.

@TheSteveKinney 22 дня назад

@@alannoruspur5315 I’m not sure if I was clear, so I apologize - I’m only connecting the microphones receiver to the combiners power supply rather than using the power brick it came with. That’s all. I’m definitely not using the antenna from the combiner because that wouldn’t work. I’m using the two built in antennas that attach to the back of the rack unit. And it works flawlessly. When setting up, the first thing I do is power everything up and let the mic unit scan for open frequencies. Then I move on to the other wireless units. Not once have I had issues. But yeah / the only thing using the paddle antenna is the wireless in ears. Again, mic is using its built in antennas.

@alannoruspur5315 21 день назад

@@TheSteveKinney Oh, I see! That answers all of my questions! Thank you so much for your time and detailed explanation! :)

@lhenn_ 11 месяцев назад

Hey, we, too, are currently thinking about rebuilding our IEM rig and selling the X32 for a Presonus 32r as we want completely independent inputs (preamp/gain) for FOH and IEM. We would use ch1-16 of the 32r for IEM and 17-32 for FOH. Question: What about phantom power using the Seismic splitter snake? Isn't there the risk of sending phantom power twice to a device or backfeeding an input, that has 48V deactivated?

@TheSteveKinney 11 месяцев назад

Yes - this particular split snake is not good for using phantom power. The great thing - is that the way I designed the build - nothing here requires phantom power. But if so - there are a few tools by triton audio that can fix the problem. And also / a different split snake can work great / might be simpler.

@brett-westgrove-country-music 9 месяцев назад

The phantom thing seems pretty overblown and maybe a relic of times before 48v was standardized on the preamp end…? Two sources of 48v DC through a y-cable is still 48v DC on the other end. The only difference is the mic could theoretically pull double the amperage (half from each pre) should it need it or is broken (in which case it’s already broken). I’d say most (all) modern pre’s are standardized to 48v and can surely even handle a few volts variation. I’d bet this idea comes from days gone by where some preamps used lower than 48v for phantom and back feeding 48v from the other side of the split would over-volt the circuit…? Anyway, I run both Seismic and my hand-built passive splits in everything from clubs (with clueless FOH guys) to massive festivals, and have 3-5 phantom mics on stage - I guarantee they and my x32r have seen “double phantom” on many occasions. Also to note, a lot of fancy, custom-built fly rigs use passive splits, too, and it seems to work great for them as well! Anyway, just my take and experience - and maybe can save a budget bad a few bucks, or keep some from being afraid of splitting condensers! Unless your rigs are on two entirely different power systems that could cause noise issues isolation is probably not necessary. It certainly won’t ever hurt but it’s much more expensive and not actually as pure of a split! Hope it helps - let me know if I’ve overlooked anything! 🤘🏻🎸

@TheSteveKinney 9 месяцев назад

@@brett-westgrove-country-music somewhere in the comment section, seismic audio resounded directly to this. I’m inclined to agree with you from experience with these snakes. But just wanna be fair and safe with recommendation. Love the comment, thanks for sharing - super helpful insight!

@brett-westgrove-country-music 9 месяцев назад

@@TheSteveKinney yeah, definitely don’t want someone kissed at you for follow å recommendation but then doing something they don’t understand and burning the festival down 😂

@nicolmicah Год назад

Steve, you didn't explain why you went with the Presonus

@TheSteveKinney Год назад

I know - I really need to make the follow up video.. There are some great bits on why but just so you don’t have to wait, to summarize. Modeled eq’s and compressors across every channel vs behringers 8 busses More flexible routing, and assignable Headohone outputs Better pres, easier to understand software The iPad app is the same as the desktop app, so you’re not missing features at all Smaller device footprint, all I/o is included on the device vs behringer needing the additional device to get the full I/o The soundchecking software is sooo great (presonus capture) - vs behringers nothing That’s largely the reasons

@jcalmade 3 месяца назад

Can you fly with this?

@TheSteveKinney 3 месяца назад

I’m sure you could, but it would expensive as all heck cause of the weight. Would be cheaper to ship.

@jakejaket Год назад

Video for presonus coming soon??

@TheSteveKinney Год назад

Yeah mate! Things are going slow. The label I do work for is killing me at the moment. Just ripping my time. So videos have been slow.

@jakejaket Год назад

@@TheSteveKinney able to give a few sentences on why you went presonus?

@TheSteveKinney Год назад

@@jakejaket For one: To get the same I/o out of the behringer rack unit, you need an additional device. Presonus is 2U rack space. Behringer would then be 6U and two devices. So it makes more logistical sense. The next biggest reason is that the headphone output can be assigned to follow the mix of any of the outputs. Where as the behringer is only on the main left and right. This whole rig will be next to the drummer, which means that his personalized in ear monitor mix can then be patched to the headphone out. Long story short, very flexible for routing. THEN. The real kicker. On the behringer unit, it has modeled plugins, but you can only use 8 models, for the whole board via the sub mixes. On the presonus, you can have modeled eq’s and compression on EACH channel. For all 32 channels. Plus subgroups. In addition, each channel has its own limiter as well. So overall, it’s a far superior mixing console. Only thing that behringer has is the fact that most venues buy it since it’s the bare minimum for a FOH system.

@blueskky9996 Год назад

Very nice build. I hope your apartment is on the 1st floor.

@TheSteveKinney Год назад

Ha ha😅 good call. Indeed it is.

@jmac6832 Год назад

Cell phones and wi-fi aren't in the same frequency spectrum as wireless ears and mics so they will NEVER be an issue for you.

@TheSteveKinney Год назад

Sorry, but literally. Always and anytime a phone is near any of the wireless stuff - there is whipping. You are right that they aren’t in the same freq, but from experience, it’s non stop.

@jmac6832 Год назад

@@TheSteveKinney Just make sure that your wireless isn't in these ranges: 698-806 MHz (700 MHz Band) 806-849/851-896 MHz (800 MHz Band) 1850-1910/1930-1990 MHz (PCS Band) 1710-1755/2110-2155 MHz (AWS Band)

@alexbaumy Год назад

In the title do you mean "X32?"...as there is no such thing as a Beringer 32R..

@TheSteveKinney Год назад

This is not a behringer. This is a presonus 32r and it’s way better than the behringer for a bunch of reason. And I feel shitty cause I just haven’t had the chance to make the follow up video. I have great experience with both. This is what I’d get every time.

@alexbaumy Год назад

I know...change your title to say (NOT a behringer "X32"

@TheSteveKinney Год назад

@@alexbaumy OHHHH gotcha!! I don’t actually make any of the titles - so I didn’t even notice that. Good catch! I just do the nerdy filming and editing. LOL All the backend stuff is handled by my wife. I’ll fix right now! Thanks mate!