How To Build Boat Trailer Steps 

I do not have access to a welder so I purchased an Easy Step out of Tyler,Texas ... Delivered in 24 hours !!! Thanks for the video ... wish I had seen it a couple years ago

Your friend does nice quality work. I like his step designs. Perfect for a boater single handed launching and retrieving when no dock is present at a launch ramp.

This is perfect timing I just bought a “new” to me boat yesterday and was thinking about a set of steps to get in. I just hope mine comes out that good he does nice work

what a joy watching a real craftsman at work...awesome!!!

Master Craftsman. Always a pleasure to watch them work. Thanks for sharing!!

Really nice set of steps there. They're a great idea. While we haven't fitted steps , we did fit steel mesh to the floor of the trailer so we can walk out on it in the water. It puts a barrier between us and saltwater crocs. Cheers and hope you had a great Easter up there !

I tried building me some awhile back. Them 20 penny nails i used made a mess outta my boat didn't think about putting them on the trailer. Awesome.

Great show thank you. I hope you and your family have a blessed Easter.

Competition is a good thing ! Excellent workmanship in a niche market. Best of luck !

Hey my friend just stopped by to say happy Easter smile and laugh often.

Cool. Really like seeing things come together on a project.

Happy Easter Fellas! Really cool meeting you both at the Catfish Conference.

Great video, those steps are great and I just may have to get some. Thanks for another great DIY and keep them coming.

Happy Easter and Stay safe and healthy buddy! That is perfect timing! My new boat and trailer are going to be so happy with these new steps! Bad thing is we can't even take her out to break in the motors on her yet. TA DAY we hunker down so TA MORROW we can fish!

Man those are exactly what I need!!! I will be contacting him. Happy Easter, he has Risen !!!

He done a good job on them! I'm an old school welder,arc welder and cutting torch guy, then side grinder. wish I had a plasma cutter and wire welder. Good video

Those steps are pretty neat Keith. I've seen some like them before. I would love to have a set for my boat. My old knees ain't what they used to be.

Awesome build yet again! Nice to see some local boys spreading some wisdom on RU-vid! ( great outdoors is 15 min. From my house). Happy Easter!

Middle of the pandemic and not a hair out of place. Another cool video!!

Great video, with some awesome information 👍. You’re a very good fabricator as well . Stay safe and healthy my friend 🤴

That IS cool. Thanks for sharing and stay safe. Happy Easter!

Those are awesome! Will look real good with my t-shirt! Oh, and the cutting board.you are going to send me!

Been waiting for the announcement on that giveaway! Hey another awesome video server love your work, you are absolutely killing it right now!

Excellent video, I have the same problem getting in my Tahoe, differently need to call about those steps. Thanks for spreading the word.

That's an awesome idea!!! Build one for each side and you have a landing guide when pull up on the trailer!!! Plus, by having one on each side, it allows you to get off or onto the boat from either side!! Stay safe, my friend... This "Coronie" mess will be over before you know it!!!😂

Wow! Your buddy is awesome bud. My hats off to him 👌👍👊😎. Congratulations to the winner of my fly vise 😂. Thanks for sharing brother 👊🎣😎

Very cool diy. Congratulations to Joe. Great video my friend.

What a awesome upgrade time and money well spent. Happy Easter to all.,...

Yall have made an awesome help video here. Thanks

Thank you for your intro to this design. You’re good.

Incredible craftsmanship!!

Thank you. I watched it twice. I’m gonna build on on my trailer.

Never saw steps like this before. Man they are nice!

Congrats to Joe S. Awesome build! Cool looking steps.

Congratulations Joe S.! and... Very nice steps!

Thank you I purchased 60,000 in machinery to make my cheap steps! Well worth it!!!!!

Awesome video! I will be contacting them to order one. Thanks!

Is there anything you cant do. Your a genius. A bloody genius. Great video.

Awesome! Happy Easter!

Love it! Steps are super expensive! I like the fact that he is local too! I will call today.

Another great video. May have to try a set of those.

Man them some Bad Azz steps.That dude Can Build. Can you get the brand name of the fluke with the Mohawk lol. Great video Keith thanks for sharing.

I’d much rather buy these than some big box stores over priced crap! Keep up the good work!

Great idea ,great design ,my new boat install and tough to get in from the front

Those steps are freaking awesome! And this is coming from a guy who owns a POS Shoreland'r' Trailer. Man I hate that thing. LOL Happy Fishing Buddy and Happy Easter!

Great steps. If I wasn't so old and stove up, I would build a set.

I need these! I’ve had 6 ankle surgeries on my right ankle. I’m calling The great outdoors

Your buddy is currently only handling local orders. You got me all excited!😛

I'm building a trailer for a boat that I'm building here in a few months and I think I'll have to build me some steps like this! thanks for the video!

Super awesome , I need some for my ranger !!

Good stuff. Price is cheaper than an ER visit if ya slip getting in at the ramp. Also for some reason video stopped missing s way on my end. Got the “Something went wrong message”

Great steps 👍👏👏

They are Awesome!

Great video

Those steps are really nice.

Looks great

It looks like the tongue swung starboard, if it were mine I might have made it for port. Maybe there was a reason. This was awesome, I've never seen this but now I need it lol. I appreciate you. Thank you for sharing your skills knowledge and experience

That is a great build!!!

I should get started on a set of these Ta DAY! since I watched the video ta DAY!!

Love my steps from trick step. They are a little spendy but worth it imo😉🥃🇺🇸. Looks like those would work just as well👍😉🥃🇺🇸

Man...those steps look better than the steps you buy from Trick Step... Thanks for the video...I will be ordering some maybe by fall. I have a 2005 18ft G3 HP180 Aluminum Bass Boat with a completely removable tongue from the trailer that slides out of the trailer reciever...(not swing away) Would there be any problem shipping long distance to me here in Mobile Alabama? Much love from Mobile Alabama

May Have To Make A Set For My Boat!!👍Gettin' Old Sucks!😁

!CONGRATS to the winner

I have to do this for a friend but I'm nervous, I just finished welding school and want to do it good. This would be my very first job. He said he just wants something simple, again I'm new to this all but I want to do a good job. His boat is a little bigger too. It doesn't have to be like multiple steps he said, just like 1 where he can pop up easier.

Good idea 💡

My next project is to build some sort of crab trap roller hauler. I don't like rubbing the rope against the side of my rubber rub guards the rope cuts into it if the trap is heavy enough so I have to bend over and pull to keep it off the side. Also a roller helps shed some of the water out of the lines as it comes aboard. I was thinking about chopping apart a bicycle front wheel and using part of the rim as a rope rub guard and the hub as a roller attached to 2 pieces of angle iron(90°L's) for mounts. It wouldn't cost me anything but would look ugly as F. Might just buy a small bow roller and use 2 90°pieces of aluminum to mount it, that way I can mount it out far enough I don't need a rope rub guard. Any thoughts on a diy version pot puller?

I build them too.they are a pain in the butt and every trailer is different

Those are awesome!!!! If you’re only need 1set be better off just buying some from him!!!!!

What part of N.C. are you from? I’m in Shelby, and I recently discovered your channel. Love it! When I saw Great outdoors in Cherryville, I was wondering if you were that close to me? Keep the DIY coming, I love some of the ideas!

Nice set of steps!! Where can I get one for a Bass Tracker Pro 175?

I live in florida and mostly saltwater fish. I need these steps for when I go out solo

Thank you

Looks amazing. Just don’t know how it would hold up to salt water.

That they're random generator pick the wrong name lol but congratulations Joe S. Happy Easter

Those steps look great , been looking for a set on my Tracker Grizzly 2072 how much would something like this cos5

Did a search, can't find, I need these steps for my boat, the sooner the better. Need a website or number to order some.

HAPPY EASTER !!!!!!!!

Are you using the same torch to weld that you cut with?

HAPPY EASTER, stay safe and healthy.......

Now that is what I need!!!

I subscribed immediately upon reviewing the latest vids you’ve made. Thank ya Lord!

I got a 14ft suncoast it’s a 1978. I’m interested for sure.!

Nice video man do you know if he ship them to Vermont I’m planning to buy some for my boat this week.

There you go again. Giving me ideas............

Nice steps how much would the finished item weigh say 4 to 5 steps as Australian boats different to your bass boats I have a Tabbs tinny { aluminium} 4.6m ill try and attach a pic.

Help. I need you to do a DIY video for us please. I have a kayak and want some rod holders (like Scotty) to screw down. I am not talking about the pvc rod holders that people have made for transporting rods. rather I mean the rod holders that u put rod in when u are actually fishing. I have looked on RU-vid and there are no videos showing how to make these. I just bought a fishing kayak and it has pre drilled holes made for store bought devises. But they are expensive and don’t line up anyway. Thanks so much. I love your videos.

I have a tracker pro 170 - could I get a quote on what a step for that would cost? It's a really common model boat and trailer.

Done

Just wondering the cost. An what info he would need on the Pro Tracker 195 team TXW

I contacted Great outdoors in Cherryville NC about boat steps and they acted like they didn’t know what I was talking about . I want to get some steps built for a 96 Sprint Bass boat . Do you have a contact name ??

Any idea on costs? Just a range is fine. I am not holding anybody to numbers as it’s highly variable.

This video gave me a bad case of band saw envy the way it cuts through steel, makes my cheap Harbor Freight one look like a Lego construction.

Is your friend David still making trailer step? If so I have a Pioneer sportfish 197 center console on Magic tilt trailer I would like to know what it would cost for step and how to received them. I'm in New Orleans La. I didn't sent no pictures you can look it up on the internet, top of my boat to the tongue is about 40 inches.

How do I get in contact to price out some steps for my boat?

I really need these for my tracker grizzly 1860.

Where did you get the non slip surface material from?

That's a real good idea for folks too old to climb in like a normal person. Oh, didn't I hear you say you were getting some too?😂😂😜

Does he have a way to get measurements on a Tracker 175 Tournament Edition without me having to come up?

I have a deck boat I just got it would be neat to have steps

done!