How to Build Icon A5 RC Plane with Foam Board 

I never have a successful seaplane until now, this Icon A5 is beautiful to see and also a good flyer. You can choose to take it off from ground or from water, I have the plans for landing gear too. It made out almost entirely with 6mm Depron foam and a few plywood parts. It has a clear canopy and a pilot figure from papercraft that you can build. The decal also available for download. The plans come with A4 and A0 size and A3 for the decal. It has some issue on the tail but I already add plywood reinforcement part on the plans.
SUBSCRIBE and Like to support this channel
#rcplane #depron #icona5
You can download the plans on the link below :
A4 Plans : paper-replika.com/RCplans/PR_...
A0 Plans : paper-replika.com/RCplans/PR_...
A3 Decal : paper-replika.com/RCplans/Ico...
Build instructions :
paper-replika.com/index.php/r...
DONATE via Paypal : Juliusperdana@yahoo.co.id
Join this channel to get access to perks:
/ @juliusperdana
Playlist :
00:00 Opening
00:50 Aircraft Design
01:41 Maiden flight on land with landing gear
03:00 Taxi test on water
04:42 Flying above a lake
08:23 First take off from water
09:51 Start build the fuselage
11:33 Canopy and battery hatch
13:59 Build pontoons
15:14 Stabilizers
17:00 Build wing
19:00 Installing motor
20:10 Continue building wing
22:00 Applying decals and landing gear
Specs :
1. Wingspan 1400 mm / 55.1 inches
2. Flying weight : 1000 gram/ 35.3 oz
3. Wing loading : 40.5 gram/dm2 - 13.3 oz/sq.ft.
4. Wing cube loading : 8.1
5. Wing Area : 24.69 dm2 / 383 sq.in.
6. CG : 5.5 cm / 2.1 inch from LE (leading edge)
Electronics
- DXW 3536 1200kv - alternative on Amazon : amzn.to/39JKqpY
- 40A ESC - buy on Amazon : amzn.to/3G6IUdD
- Battery Lipo 3S 2200mah : alternative on Amazon : amzn.to/3NxyE0b
- 4 x 9 gram servos (micro servo)
- 45mm, 2 x 55mm foam wheels
Materials :
1. 5mm Foamboard/ Depron/ Polyfoam
2. 3mm Plywood
3. hot glue, UHU glue, CA glue
4. packing tapes
Tools :
1. Hot glue gun
2. Heat gun
3. Covering iron

Хобби