HOW TO BUILD THE PARTHENON MODEL WITH PAPER I DIY PAPER PARTHENON | DIY PROJECTS WITH PAPER 

thanks a lot

Glad it was helpful!

Great job!

wowwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww i dont give a shit

You are most welcome

no problem. have fun ❤️

Cool, thanks❤️🙂

You're welcome 😊

Thank you so much! Jeswine. Have a good day ❤️😊

i need help , im doing this for a project too, but how did you cut the holes without a hole puncher? I dont have a hole puncher either 😭

@@user-qr1zw1xq3m I just put paper on the little poles to glue them to the paper that how I did it without any holes

Y’all there’s hole punchers at the dollar tree!

thank you❤️😀

Thank you my friend 😊

No problem 😊

I believe so. I used a regular drinking straw and regular puncher so it should be the one ❤️

@@happycraftstv Thank you

My pleasure 😊

I'm glad you like it

abt 2 to 3 sheets

Glad I could help!

Thanks 😆

Thank you so much 🙂

Thanks 😊

I used drawing paper. however you can use any paper you like such as color paper, construction paper or even A4 paper

You're so welcome!

Hi I appreciate your efforts very much

It's soo good

But can you please explain the dimensions once

@@ANUSHKAGUPTA-xq4wn the measurements are in both inches and centimeters. If you use centimeters just ignore the inches and vice versa.

You should start with 1cm because if you start with 0, the gap between them counts as 1 cm already

So basically if you start with 0 and end in 5 cm, that's 6 cm already

@@lollipopstana4039 I already finish this project and send it to my teacher and i got a high score tho XD but thanks for info i

Thanks so much 😊

online or in any craft store www.amazon.com/Craftinova-Advanced-Handle-Classroom-Greeting/dp/B08CMZVR5X/ref=sr_1_1_sspa?crid=VUON9GA7C161&keywords=one+hole+puncher&qid=1669497082&sprefix=one+hole+puncher%2Caps%2C120&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExVEhSUjlBMDI0VEwmZW5jcnlwdGVkSWQ9QTA1MDMxMDgzNk5QUlRaVkJGOUQ2JmVuY3J5cHRlZEFkSWQ9QTAzNTk4NDEzM043TERHUFNVUTQ0JndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==

Glad you enjoyed it!

any regular paper. I prefer off white color

@@happycraftstv thank you for the advice

@@happycraftstv do you think card stock paper works?

I don’t do cardboard sorry

just regular paper. I got a drawing paper off-white color

papel, solo papel normal, pajitas, cinta adhesiva doble y un poco de pegamento

just paper and drinking straws, double sided tape. I used drawing paper, off white color. If you don't have it just use regular copier paper.

just regular paper

Welcome 😊

@@happycraftstv it was very hard to do with the straws

You need to use double tape so when you wrap the paper around the straw it will be easier.

paper and straws

I think it’s mentioned there

I used drawing paper

I only have the video ❤️

You can do it! it took me about an hour ❤️

@@happycraftstv yo thanks, my miss told mine was the best one… thankssss

@@happycraftstv yo and can u make a video on making burj khalifa (the tallest building ) plzz

Just regular paper and drinking straws ❤️

it’s borderless

@@happycraftstv thank you!

Which part?

When you did the straw paper rolls, mine may have been a bit too short in height, and in 1:26 my measures are never equal, even when I use all the measurements you’ve put in the video. I hope that can be helped with!

@@deezpotatoes4119 the straw should be 2 1/2 inch long or 6.2 cm and the paper height should be 2 inches or 5 cm. You can’t go wrong with those measurements 😊. When I were using the one hole puncher I just tried to make sure to push it to the end so that all the holes can be in line. Hope it helps ❤

@@happycraftstv Very well, thank you!

@@deezpotatoes4119 what did you put in the straw paper rolls?

It’s not necessarily 2 cm. First you take 1/2 then 1/3 of that 1/2. Just follow the video instruction. Have fun crafting ❤️😊

I will try to make it slower for future videos. For this one, if you think the video is too fast for you, just adjust the video speed by clicking on the screen you are watching, select the 🔆 button at the bottom of the screen (next to the cc button), then select the Playback speed. From the drop out menu you can slower the speed you want like 0.5 or 0.75.

I used light yellow card stock paper. but you can use regular color paper too❤️😊

i agree

Same

🎉