No video :(

How To Burn Screens Using Vinyl Quick Tips #2

Подписаться 78 тыс.

Просмотров 59 тыс.

50% 1

In this video I did an Experiment after having issues while trying to Print an order and it actually worked. Links below for supplies & equipment that I use to print t-shirts.
Shop for Equipment: shrsl.com/27cgo
Print Squad Group: www.Facebook.com/Groups/PrintSquad
Order Print Squad T-shirts: www.TshirtChickTv.com
My Screen Press: goo.gl/uGZhdW
Screen Printing Press: amzn.to/2DaJVTH
Free Website & Free Credit Card Processing Below: squareup.com/i...
My Heat Press: amzn.to/2tCYRFn
The 15 inch Cutter I started out with: amzn.to/2sG6TsJ
24inch cutter I currently use: amzn.to/2sk0LHd
T-Square It: goo.gl/Kk4JXH
Logo It Tool: amzn.to/2szzWDd
Glitter Vinyl Rolls: amzn.to/2rFWLmK
10 Colors/Sheets Glitter Vinyl: goo.gl/aC4AuC
6 Colors/Sheets Glitter Vinyl: goo.gl/GJ9iPP
Ebay Vinyl I Use: goo.gl/ntvnza
T-Square It: goo.gl/Kk4JXH
Teflon Cover Sheets: goo.gl/mA7dNL
Heat Press: goo.gl/Bgdjmi
Teflon Pillow: goo.gl/SIiFU8
Squeegees I use: goo.gl/DNbPGg
Screens that I use: goo.gl/gG8cSl
Heat Transfer Vinyl 12x15 in. Vinyl Sheets: goo.gl/rRMeGp
Adhesive Vinyl 40 pack of Vinyl Sheets: goo.gl/I7BcAI
Oracal 12inx10ft Adhesive vinyl roll: goo.gl/TKQ2tG
Heat Press: goo.gl/aQe7NR
Vinyl Cutter: amzn.to/2mtJ3PT
X60 Wipes: amzn.to/2Dnolcq
Press Wash: goo.gl/41CJqj
Camie 480: amzn.to/2D70CAo
Gloves: amzn.to/2mkqGwB
Ink Spatula: amzn.to/2D4jX4k
Music in this video by NCS Check them out below:
/ nocopyrightsounds

Опубликовано:

27 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 187

@AnthonyMonaghan 4 года назад

Print your image onto regular paper. Grab some cotton wool balls. Dip them in baby oil. Rub the oil into the paper and hang the paper to dry. The oil makes the paper translucent leaving the image intact. We used this method back at school when we couldn't afford to get transparencies printed. Works perfectly the only restriction is size of course.

@TshirtChick 4 года назад

That sounds really messy. I wouldn't want to put oil on my screens because it will cause issues with the emulsion adhering to the screens.

@AnthonyMonaghan 4 года назад

@@TshirtChick not in the slightest bit messy. You just need a cotton wool ball with literally a dab off baby oil . The paper absorbs the oil and then hang it with a clothes peg to dry. I've done this with my kids....it's kiddie proof messy! Test it out on a plane piece of printer paper. The transparent paper is dry when you use it against the screen and it doesn't effect the emulsion.

@joelnickerson6739 2 года назад

Now that's an awesome idea. I haven't started printing yet but it's nice to see screen printers finding things that work and thinking outside the box.

@jeanaatkins8083 2 года назад

Finally, I've had this idea to do this, but didn't know if it would work. Thank you. I'm just getting started doing this. Subscribed.

@TshirtChick 2 года назад

YW! Thank you for watching!

@idamaeb.5333 6 лет назад

That was awesome of course. You know how to improvise for sure. Love it

@bridgetgainous5487 6 лет назад

Awesome! Don’t forget to show us how to use the vinyl the other way ( as a stencil) as well. Keep teaching us!👍🏾

@pastmaster32 4 года назад

I learn more from you each time I watch your videos! Great job!

@lovenotwar7195 5 лет назад

Amazing, simply amazing✊🏿👍🏿 The Creative juice makes us go to places we didn’t realize we could go. Great work and Thank you for sharing rhis.

@TshirtChick 5 лет назад

Thank you for watching!

@snowydaze Год назад

wow wow I am excited to try this!

@thadon3451 2 года назад

We learn something new everyday thx for this video

@TshirtChick 2 года назад

Thank you for watching!

@JWPhotosanddesigns 6 лет назад

You go Sin. That was awesome. I also saw some vids here on yt with people using vinyl as stencils of the screen.

@TshirtChick 6 лет назад

I have a video where I did it that way it's one of my first T-shirt videos that I posted.

@spamlover123 6 лет назад

Bless you TshirtChick! Thank you for sharing your knowledge! Good job on that experiment!

@chrisnwendyduncan 4 года назад

I just came across this video. 3 days ago I had to use vinyl (because I use inkscape and dont know how to fully use it). I just applied the vinyl (mirrored) directly to my screen. Came out beautiful. Didn't think to adhere it to the film first.

@TshirtChick 4 года назад

This video was the 1st time I did it that way myself Lol!! Thanks for watching

@tpcustomz5414 6 лет назад

This is awesome. I keep looking at these videos trying to see what I need to get into screen printing. I don't have the space right now but this is something that I really need to get busy with. Thanks for all of you videos.

@TshirtChick 6 лет назад

I am in the process of making a video with everything you need to get started screen printing. I hope to have it up soon.

@TheEndeavoringFamily 3 года назад

Thanks! So many people did it the other way, but, this was exactly what I was looking for.

@TshirtChick 3 года назад

Thanks for watching!

@weaksauce3155 4 года назад

This is a great idea! Thank you for making this video. I am going to try this and see if it works for me.

@TshirtChick 4 года назад

Best of luck!

@Elevationprint 6 лет назад

Nice work. You can also apply the vinyl to the screen directly

@TshirtChick 6 лет назад

I know I said it in the video. I also have a video on here from back in the day where I showed how I did it.

@Elevationprint 6 лет назад

Sorry.. I got excited. I just heard you say it ;)

@ladyinred2156 6 лет назад

Elevation Print & Sign true that’s what I’m doing some times but it take a lot of time to take the tape of. What I’m doing now is I put the vinyl on the shirt it’s much easier.

@olddanb1 4 года назад

Impressed. You really know your stuff.

@TshirtChick 4 года назад

Thanks for watching!

@roshawnda97 4 года назад

Impeccable work Sin!!❤❤

@TshirtChick 4 года назад

Thank you Roshawnda!

@sweetscienceboxinggym5646 4 года назад

She is cool! Entrepreneur in action!!

@TshirtChick 4 года назад

Thanks for watching!

@thestudioofhopecorporation3356 6 лет назад

You can also use vegetable oil on plain copy paper to make the paper transparent and hold the image to the screen, it works when you really need it done quick.

@TshirtChick 6 лет назад

That sounds really messy and I don't think it's good for vegetable oil to come in contact with you screens.

@EverythingByNesha 6 лет назад

It actually works well. I also burn using vinyl directly on screen. It takes some time time getting each piece off but I never have an issue with it not having good contact. You do what you have to with limited resources.

@lizziec7794 Год назад

You are amazing! Thank you!😊

@cheryllynetteruth 6 лет назад

LOVE the Juneteenth shirt!

@patrickkelley9057 4 года назад

Love your videos. Thanks for sharing your knowledge. You are a huge help and inspiration.

@TshirtChick 4 года назад

I appreciate that!

@darryllparker9298 5 лет назад

Funny hearing you say Shreveport I have family down there

@TshirtChick 5 лет назад

Small world LOL!

@darryllparker9298 5 лет назад

@@TshirtChick but it's been years since I visited

@1LoDeezydotcom 3 года назад

This idea came up in my head yesterday. Had to see if anybody else was hip lol

@TshirtChick 2 года назад

LOL! Thank you for watching!

@artyfarty87 4 года назад

That's pretty creative Sis xoxo

@TshirtChick 4 года назад

Thank you! 🤗

@DJVYNNIE 5 лет назад

I just want to say I love your videos, keep it up. What is the best vinyl paper you can recommend for a starter. Thank you

@TshirtChick 5 лет назад

My Favorite vinyl is Stahls vinyl but I have some videos about other cheaper vinyl that I use sometimes. Check out the secret vinyl store video for links below that video of where to buy vinyl.

@meljay4190 3 года назад

i use htv all the time to burn screens , its works fine until u get into smaller lines , i take it streight from the cutter to the screen and stick it right to the screen

@RhyBeats 6 лет назад

whaaa.... Now I need to get my vinyl cutter to work. Great job!

@JanineMKartist 2 года назад

Cool idea!

@TshirtChick 2 года назад

Thanks!

@bjackback 6 лет назад

That was great, Sin. Keep teaching!

@pinda0020 6 лет назад

I was thinking about doing something similar but with htv , mine have clear backing so it might work the same.

@Factory928AC 5 лет назад

pinda0020 did you ever try this? I’m thinking on trying this method you said instead of the film she put the sticker on

@valeriejefferson1118 5 лет назад

Love your videos. I have a hard time weeding some of my final the letters. They don’t always come off of the venal or it tears. Is there a particular brand i Should be using? I end up going through too much material/

@TshirtChick 4 года назад

It sounds like your cut settings may be off for the material you are using you may need to adjust it

@lukamossman7416 3 года назад

You’re a fucking genius. I been googling if this was possible and no one made a video, until I found you. It seemed like such a hassle to buy transparent paper and use my printer when I can just cut a stencil with my cricut, but I wasn’t sure if it was possible. Thanks for this video.

@TshirtChick 3 года назад

YW.

@Kitkatbarz119 6 лет назад

This is nifty! Very creative! Can you easily reuse the vinyl transparency again?

@TshirtChick 6 лет назад

I didn't try to remove it but I think it will be easy as long as you use the smooth side and not the side that the printer would print on.

@bfyre1 2 года назад

@@TshirtChick YES IT COMES OFF

@bsscreenprinting 5 лет назад

what kind of emulsion do you use

@markgomez1387 6 лет назад

It works really well I kind that a few times myself

@TshirtChick 6 лет назад

Thank you for watching!

@JimmyLani 6 лет назад

Miss this. I have tried this.

@juliusvichinsky 5 лет назад

Thanks for the great information. Well done!

@geemoney0313 5 лет назад

Love your videos. What kind of printer and paper you use to print for your screens.

@TshirtChick 5 лет назад

I use Transparency film.

@geemoney0313 5 лет назад

TshirtChick thank you. Do you have any advice on what printer to invest in.

@beencouragedemptynestertsh1768 5 лет назад

Excellent Lesson!

@TheHouse-pv7lv 3 года назад

Love your videos!

@TshirtChick 3 года назад

Thank you!

@dzeus_tb 2 года назад

God bless. Thankyou for the knowledge

@TshirtChick 2 года назад

Thank you for watching!

@jamesmuguku772 5 лет назад

TRY PUTTING COOKING OIL ON THE REGULAR PAPER PRINT AND SAVE SOME VINYL....STAY BLESSED FROM NAIROBI,KENYA.

@TshirtChick 5 лет назад

Thank you for watching!

@deewill6663 4 года назад

This is a good video. I am thinking about Print Screening some Polymailer bags. I have only the Speedball ink for print screening a simple Frame & Base from speedball and the plastic polymailers - No Flash, but heat gun & have a heat press. Do you think that it will work? Can you do a video on this to see if it will work? Thanks

@TshirtChick 4 года назад

I have a playlist with videos of how to cure without a conveyor dryer on my youtube page. Hopefully that will answer your questions. Thanks for watching!

@domingocartagena6810 2 года назад

That was awesome!

@TshirtChick 2 года назад

Thanks for watching!

@orgyofdeath 3 года назад

This was great thanks!

@TshirtChick 3 года назад

Thank you for watching!

@bradleyand444 4 года назад

Your videos are so helpful. How was the quality of the print? This can save me a lot of money the film positives are costly in the start. God bless

@TshirtChick 4 года назад

Using vinyl does not affect the quality of print it only limits the detail that can be printed because you can't print really detailed designs using vinyl.

@markgomez1387 6 лет назад

And thank you for all your videos that you do love them

@michaelthorne209 3 года назад

good job

@TshirtChick 3 года назад

Thanks

@ricardohernandezmarcelos1817 4 года назад

print it on regular paper , then ad to the paper wd-40 or baby oil and your paper will become a transparencie. cheap and efective

@TshirtChick 4 года назад

The Transparency film are already pretty cheap and using those oils seem like it would be a big mess to clean up.

@ilyzaspencer284 2 года назад

Would I have to put the vinyl on transparency paper for this to work? Could I put it directly on glass or directly on the screen instead?

@TshirtChick 2 года назад

That would work I just didn't want the job of peeling it off the glass when done.

@cruzer74 5 лет назад

Niceeee. That was a good to know thanks. I just started using screen printing. I have been trying decided on a printer that I can start using. I have been using an epson workforce printer and it's not been working well for me. What is a good printer that I can get that is good, maybe like the top 3 printers? Thanks.

@TshirtChick 5 лет назад

IDK what the best printer is I think that really depends on what people prefer. I have a video called What Printers do I use that shows all the printers I have in my shop and tells what I use them for. Hope this helps.

@ghettolove8766 2 года назад

Heyyy....didn't see where you listed your screen burner from.

@TshirtChick 2 года назад

I got it from Ebay. I looked for it but they may not sell it anymore cause I couldn't find it.

@alanwaggett2010 5 лет назад

you can also use sticky vinyl direct to your screen

@TshirtChick 5 лет назад

I have videos on that subject.

@lil04281122 5 лет назад

Love the shirt!

@ladyred2771 6 лет назад

Awesome tip and video!!! 👏👏👏👏👏👏

@benhummer185 3 года назад

it would be cheaper to take lavsan film, which is used for packaging flowers

@TshirtChick 3 года назад

Thanks for the info but, I don't do flowers so I don't have any of that film so it would cost me more to buy something extra. In this video I'm using what I have on hand because I was in a pinch and didn't have time to go looking for an alternate so I didn't have to spend any extra money on items I don't have at my shop.

@benhummer185 3 года назад

@@TshirtChick it's ok for, if you can reuse that your film again 👍 sorry for my perfect english😂

@ladyinred2156 6 лет назад

Thank you so much . I order my screen and paint but not yet my imulsion etc but soon I Will.I have already my cutter. Im gonna try this.Thank you I can learn so much from you. Btw love watching your vids💐 ps,how long you let it burn?

@TshirtChick 6 лет назад

Thank you for watching! The burn time will depend on what you are using to expose your screens I just used my regular exposure time no need to change the amount of time because of the vinyl.

@graphicwarehousellcpassion3194 6 лет назад

Nice....Troubleshooting is half the battle

@gwenpruitt736 5 лет назад

which printer brand do you use no than you have abandoned Epson?

@TshirtChick 5 лет назад

I have a video of all of my printers ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-eoIMgdmKyPM.html I did just buy an epson printer as much as I don't like them to use for sublimation

@MasterScreenPrints 4 года назад

I have a question, my table top burner 2 light bulb stop working. Any idea how tio fix it?

@TshirtChick 4 года назад

I don't know how to repair things I would have to find some local to fix it for me or just get a new one if mine stopped working.

@MasterScreenPrints 4 года назад

@@TshirtChick ok, thanks.

@bfyre1 2 года назад

SO BASICALLY I CAN USE HTV VINYL (THE CLEAR PART) AND USE IT AS TRANSPARENCY PAPER ????

@TshirtChick 2 года назад

Probably but the sign vinyl is waaaaayyyyy cheaper.

@bfyre1 2 года назад

@@TshirtChick BTW I tried it worked like a charm. It can be used as an alternativenif someone ran out of transparency paper and had htv vinyl laying around. Keep it up, you doing your thing.

@jrpainters912 2 года назад

You can print with paper, just put baby oil in the back of the paper . You don’t need a transparency film.

@TshirtChick 2 года назад

Baby oil seems really messy. Transparency film is very cheap and can be used multiple times in case you need to remake the screen later

@getyaenzupcustomcrafts1097 6 лет назад

That was awesome sin

@nightshifthoops 6 лет назад

How long do you let it burn for on your exposure unit

@robintalbot8019 5 лет назад

Nice job !!!! What is your transfer paper? I always have problem with that step 😉

@TshirtChick 5 лет назад

Are you talking about the vinyl I used in the video? If so it's Orcal. For transfer paper I use Laser One Opaque it's for laser printers. Thanks for watching!

@robintalbot8019 5 лет назад

TshirtChick thanks! I made a mistake. I was talking about transfer tape 🤦🏻‍♂️😉. Witch one do you use? Is it a low tack?

@TshirtChick 5 лет назад

It's a medium tack here's the link ebay.to/343NVjx

@nilajastates4807 6 лет назад

Oh that was Great another way you can burn I got to get me a silkscreen Machine now and get rid of this yudu thank you so much Sin

@TshirtChick 6 лет назад

You're Welcome! When you start screen printing Don't get Rid of the Yudu Right away you can use it as an exposure unit until you are ready to purchase a bigger exposure unit.

@melissareynolds3488 Год назад

I was actually just sitting here trying to remedy me not having to get yet another printer... I have a laser & sublimation printer and that doesn't work well on the transparency.... I was thinking vinyl or possible using HTV and just leaving it on the carrier sheet without even needing to use transp film.... hmmm

@TshirtChick Год назад

That will work

@melissareynolds3488 Год назад

@@TshirtChick Yes. I actually googled and someone had done it that way. It worked great!

@djkirkdigglerusn5476 6 лет назад

hey queen you can use the vinyl on your screen instead of emulsion its quicker just reverse what you did in this video. there videos on how to screen print with vinyl and no emulsion on youtube :)

@TshirtChick 6 лет назад

I also did a video using Vinyl as the stencil it was one of the first videos I posted about screen printing on my channel. Thank you for watching!

@ramsys9906 3 года назад

you don't need to go that far like using vynal. All you need to do is print it on paper (but make sure it's thin) then what you should do is apply veg oil on the screen that u have made, then put that printed paper on the oiled screen and trust me ur paper becomes transparent because of oil and then you can expose it to light. Booom you got your screen.

@TshirtChick 3 года назад

Vegetable oil will be super messy and I would hate to mess up my screens by putting oil on them. You have to degrease the screens or the emulsion will not stick to it so vegetable oil will cause issues with that.

@TheGrantboy26 4 года назад

thanks

@TshirtChick 4 года назад

You're Welcome! Thank you for watching!

@TheGrantboy26 4 года назад

@@TshirtChick your videos help alot I'm new to the t shirt businesses

@cherylbrown9634 6 лет назад

Please don't put me out the group... lol. Great vid.

@SCUUBDO 6 лет назад

Out!! Out!! Out!! Out!! LOL

@paulcastillo8148 10 месяцев назад

how long did you did it take to expose??

@TshirtChick 10 месяцев назад

This is an old video and I don't have time to go back to watch but I used a Yudu back in the day and it took 10 mins to expose.. I used a cheaper exposure unit after upgrading from the Yudu and it took 5 mins. The Anatol exposure unit that I currently use takes 8 seconds. Hope this helps. Thank you for watching

@doceamz7972 3 года назад

your dope!!!!!!! one love you hearddddd

@TshirtChick 3 года назад

Thanks for watching!

@danialm8122 4 года назад

thanks. GOOD VIDEO!

@TshirtChick 4 года назад

Thank you for watching!

@charissedwards6803 3 года назад

Where do I buy screens

@TshirtChick 3 года назад

It's best to buy them locally so you don't have to worry about shipping but any screen printing supply company should sell them.

@jasonenz4522 6 лет назад

could you just use the vinyl right after you weed? the light should harden the emulsion through the white paper. my epson 1400 is leaving ink on the corners of all my films...some way more then others. i have to snip off all the corners of every film, and some, a whole edge. i have yet to find a solution.

@TshirtChick 6 лет назад

IDK I never thought of that LOL!! It could work but the backing is a little thicker than regular paper. I'll have to try it. I'm gonna start using my other printer the HP T120. I think this printer is just old and it's time to give up on printing film with it. I have had it before I even got in this building so it's 10 years or more old. I don't have any issues printing plain paper for some strange reason.

@lesliebarrett6611 6 лет назад

What type of ink do you use on the transparency film?

@TshirtChick 6 лет назад

I have always usee the remanufactured ink instead of the HP brand inks.

@FIGHT101TV 5 лет назад

Where can i buy the film you use?

@TshirtChick 5 лет назад

Here is the link amzn.to/31IiJod

@royalarch5custom 3 года назад

wow

@TshirtChick 3 года назад

Thanks for watching

@mervhernandez5265 5 лет назад

What machine are you using to burn the image?

@TshirtChick 5 лет назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-pnHVXzRkTd0.html

@ejjimenez3753 5 лет назад

hi I Be traing to screen print but no body want to help me about software for names or others please you my only hope

@TshirtChick 5 лет назад

I learned everything from watching here on youtube and no one was posting detailed videos like the way I do so you can do it if you use youtube and search for what you need on here. I use photoshop, I have videos on my playlist just search for it here.

@bapestar3862 3 года назад

ayyyy youre from louisiana?

@TshirtChick 3 года назад

Yes!

@inkadinkllc6265 5 лет назад

I tried this as well and using waterbase ink, the vinyl will come off the screen if you are wanting to use vinyl on the screens instead of emulsion. Also make sure your printer is on photo glossy

@TshirtChick 5 лет назад

I have used waterbased inks in the past back when I first started screen printing while using vinyl as the stencil and had no issues IDK what happened in your situation. I have some older videos that I posted where I'm using it like some of the older cringe worthy videos LOL!

@tabscrafty1423 5 лет назад

How long do you burn your screens for?

@TshirtChick 5 лет назад

With my set-up about 5 mins. Your time may be different depending on the type of emulsion you use, the exposure unit you use, etc

@sesasfarmer8277 6 лет назад

where can we get a vinyl cutter machine?

@TshirtChick 6 лет назад

Budget Vinyl Cutter: amzn.to/2xdySF1 Cameo: amzn.to/2pb7ZNT New Version of Cutter I own: amzn.to/2Otd5jD My First Vinyl Cutter: amzn.to/2xaXMFq

@snoochscustoms7830 6 лет назад

How long was your Exposure time

@TshirtChick 6 лет назад

It's just the regular time about 5 mins or what ever the normal time you would use when using emulsion for what ever set-up you are using.

@snoochscustoms7830 6 лет назад

TshirtChick thankyou I enjoy your videos I subscribe already

@TheAfaithfulone 3 года назад

Hello how can I contact you?

@TshirtChick 3 года назад

You can go to my website or on iG

@eaglesclients7390 6 лет назад

How do i become a member of the group?

@TshirtChick 6 лет назад

There is a link below this video to the group page you can request to join and answer the questions and you will be a member.

@hamellsk8 6 лет назад

Cool 😎👍

@TshirtChick 5 лет назад

Thanks for watching!

@shaggy85021 3 года назад

I think htv vinyl would be easier....no transfer needed....

@TshirtChick 3 года назад

Have you tried that before?

@shaggy85021 3 года назад

@@TshirtChick no but it is transparent. I'm pretty sure it would work. But I really have no clue

@shaggy85021 3 года назад

@@TshirtChick update. so I tried the htv to burn a screen, Worked just fine

@PAPAZTV Год назад

👏👏👏👏🏆🙂

@jacksonbrandon5813 4 года назад

Zozo

@TshirtChick 4 года назад

Hey Jackson!

@toshtwentythree195 6 лет назад

If you are in the market for a new printer,,, Epsom ECO TANKS....They will save you a fortune in ink...

@TshirtChick 6 лет назад

I started out using Epson because that's what a lot of people recommended but i will never buy another Epson printer. I'm looking for a CIS for my HP T120 that's what I've decided to use.