How to Bypass/delete oil sensor and hook up kill switch on Predator 212... 

Very informative video. I would normally find such videos boring but this one was so well edited it held my attention.

Thanks for the info I'm doing mine exactly the same. We've built this minibike from the frame and this is the last thing to do. My sons gonna be happy in a few minutes 😁

MAJOR help, my kill switch wire came out of the sensor and now the kill switch won’t work so this helped me fix it back right. Thanks!

Definitely better to take it out for off-roading purposes. Unless ur able to keep the rpm’s up while on steep hills it’ll shut off

You may want to leave that sealed epoxy module in place. With these oil sensor or oil minder sensors with these ignition cutout features, you run the risk of remnance voltage arcing during shutdown and starting. This arcing could damage the built in CDI or TCI system in the coil. When you shut the engine off using the switch as well with the module attached, what the module does it fades the spark out as the engine shuts down leaving no chance of remnance or residual voltage in the ignition system. It also prevents arcing along the switch as you shut the motor down. A lot of these switches are just on and off without resistors and capacitors soldered to them. The module takes care of all the arcing. This is also known as a transition module.

So simple you’re very useful

thanks, much needed info out here on the webs

Good video

Hey friend thanks for the video!!! Now I have a question, how to hook up a light did u know ?

Thanks

How can you connect your head light on a mini bike on the predator 212

So what if I'm using the predator in a off road golf cart and still using the key to start it . Can I still do this same thing you did to by pass the sensor and still be Abel to start the engine with the key and not have to pull start it

Did you have any issues with the wire you snipped on the block? I just am worried it’ll leak or that wire will fall into the block

Will it start like it is at the end of the video?

So will the bike blow up and my leg would get injury or is totally okey riding without sensor

I had to do it to an old Volkswagen Caddy 1.9

after i did this exact thing im getting no spark, and it isn’t the ignition coil because it was working just fine.. you know how to fix this?

I have a brand new chipper shredder from Harbor Freight that won't start, I'm going to bypass this oil sensor and try a different spark plug. Im so pissed.

my editing is the best

The good old days of positive wire , negative wire and ground wire!?

I try this and it wouldn't work for me