I am a fan of hydro2foam myself. I use the same sprayer. But my application is a bit different. The way i do it, pre-wash the car with carpro lift 1:9 on the same sprayer>rinse> fill the sprayer with hydro2foam 1:9 then foam the whole car,give it a contact wash>rinse.. never had any streaking or anything. The reason for my method is i wash it on the car wash station where i cannot use the water freely(for one panel at a time). Coating still works as expected.
Hey @luigidicarp9521, thanks for sharing your experience with us! We are glad that the product works perfectly! Keep your car looking great all the time with CARPRO
The on-panel dilution will be different if using a pump foamer compared to the foam cannon, because the foam cannon will dilute the solution an additional 10:1. That means the PIR with the pump foamer is about 10%, while with the foam cannon it's about 1%. Is that correct?
Hey @TheBreakfastLover, yeap. The IK Pro 2 Pump foamer only uses what water it has inside when you dilute it, while the foam cannon has additional water coming from the water pipe. You can tweak the dilution in the bottle to the consistency that works best for you.
Hi @ugura6585 , since the ratio is 1:9, you add 100ml of HydrO2 Foam to 900ml of water for a total of 1 liter. If you want it to be slightly diluted then 100ml to 1L of water will be 1:10 ratio. Hope this helps
Hi louiswang648, of course, here's the link linktr.ee/marketing.carpromy to all our platforms including our online store. You can also tap the link in our RU-vid Bio for direct link to our online stores
Hi @nazranmuhammad4373 Yes you can, HydrO2 Foam can be used on both coated or uncoated cars. You can try HydrO2 Foam as a standalone when you wash your car next time! It is a Wash and Sealant 2 in 1
Hi @360procarwash3, yes you can! HydrO2 Foam is a wash and coat 2 in 1 step. It'll leave your car with an impressive depth of gloss, protection for months, and a glow that you'll admire and be back for more!
Hi sebastienderidder5418, the dilution ration is the same. Just that the volume is different. For the IK Foam Pro it's a total of 1000ml (100ml : 900ml), while the foam canon is 500ml (50ml : 450ml). Hope this relieves any questions you had
The car should anyways be fairly clean before contact washing it. So a pre-wash with CarPro Lift is the first step to make sure alot of dirt is gone and the contact wash is much safer.
It is important that you take out most dirt before doing contact wash(pre rinse/pre wash). Even though it is a soap, it is also a kind of sealant, so your car is better off clean before applying this.