HOW TO CHANGE A BASIN WASTE - Plumbing Tips - Basics

Подписаться 356 тыс.

Просмотров 1,2 млн

50% 1

This video covers how to easily change a basin waste. YES we know it moved a bit at the end. Was rectified but not in the video! We cover turning off the water, removing the old basin waste, sealing the new one with putty or silicone and then successfully tightening up the waste and trap to create a water tight seal. We then show you how to install the pipework and how to install the overflow. This method works for the pop up waste although we have done a video just for that.
🚀 LEARN PLUMBING ONLINE IN MY STRUCTURED COURSE (50% Before March): www.learnplumbi...
🛠 AMAZON TOOL STORE: www.amazon.co.u...
🥾 10% Off my workboots + workwear Use Plumberparts10: www.bigboots.c...
👓 10% Off Safestyle Sunglasses Use PLUMBER10: safestyle.com....
Learn Plumbing Online is perfect for future apprentices, homeowners who want to understand and tackle more plumbing jobs in the home, handymen who keep turning down the odd plumbing job and more. With practical follow along video lessons and discussion board you can boost your knowledge in my amazing trade. Sign up now: wwwlearnplumbin...
**VISIT OUR SPONSORS**
www.traderadiat... | www.stuart-tur...

Опубликовано:

2 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 679

@plumberparts 5 месяцев назад

STILL UPLOADING TODAY SO PLEASE SUBSCRIBE! 🚀 *_LEARN PLUMBING ONLINE IN MY STRUCTURED COURSE:_* www.learnplumbingonline.com *_DON'T MISS THIS VIDEO:_* ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-K1E3SLD7Tn8.html 🛠 *_AMAZON TOOL STORE:_* www.amazon.co.uk/shop/plumberparts 🥾 *_10% Off my workboots + workwear Use Plumberparts10:_* www.bigboots.co.uk/discount/plumberparts10?ref=plumberparts10 👓 *_10% Off Safestyle Sunglasses Use PLUMBER10:_* safestyle.com.au/?ref=PLUMBER10

@Viewer765 Месяц назад

What brand mixer tap are best for

@PBz420 4 года назад

Thanks buddy... waste failed one Sunday morning .. I had 1h30mins to repair it before I was off... never done this in my life before....followed this video... Perfect Results - absolutely save my life! Much much appreciated & now subscribed

@EddieOrz-ONJ-Archive 8 месяцев назад

Had to leave a message to THANK YOU !! (even though your video is years old) - I started a DIY job this weekend (Jan 2024) to replace a dripping sink tap washer. Tap was totally seized up, so decided to replace the tap. Isolation valves wouldn't shut off, so decided to replace those and redo some pipework. Waste trap looked a mess so that came next, only to find the underside of the sink was uneven so silicone had been used to seal the old waste. Replaced everything including a new "waste to sink" washer - BUT IT LEAKED around the waste - found you video, rushed out and bought Plumbers Mait - BINGO - Job done. THANKS.

@Idlepug Год назад

Thanks for this great informative and easy to follow tutorial! Found when having to dismantle the pipework under WHB due to slow draining sink that the waste had sheared off under the old clicker, flapping around trying to find a plumber then thought "let's see what RU-vid has to say". All bits available in the local Screwfix, all sorted, works a treat now. Cheers!

@plumberparts Год назад

Well done Pug!!! Love pugs.

@barrymohamed6993 5 лет назад

Really terrific tutorial for a frustrated DIY'er. Bought a new tap and basin waste, Simples i thought. That was until I discovered a minor leak emanating from the first seal under the plastic locking nut. After several attempts I decided to leave it alone until tomorrow. Checked out your video and now I have renewed optimism for tomorrow. Going to get me some Plumbers Mate ASAP. Cheers.

@RobertAndrewSmyth Год назад

Thank you for this video. Have been successfully able to change my bathroom sink pop up by following your guide. Much appreciated.

@joeroganjosh9333 7 лет назад

Brilliant tutorial. My plumbing supply shop insisted I would not need any "putty" to seal the thread. So I took their word. Bad decision! And keeping it cool in the fridge is great advice. Thanks, I may have to stop hating DIY plumbing.

@robertbeal Год назад

After a silicone mess with our sink (not me), then trying a basin mate before finally using putty - wow. I'm probably more excited than I should be but what a clean, leak free finish it makes! A proper finish. I ran to show and tell my wife but the enthusiasm wasn't shared. So have come here to share my thanks. Great vids, I'm no plumber but I do find myself watching all your stuff and buying from your store (always good to have tools just in case!)

@kalelkar Год назад

So you'd say always go for Plumbers Mate over Basin Mate?

@martynherman 2 года назад

Thanks very much for showing me how to change the pop up waste . Job done . Great video !

@chrisgrimsley1338 2 года назад

Brilliant 👏 Saved loads of time and the tip to use Plumbers mait was fantastic. New sink waste fitted with no leaks. Thank you very much!

@billyboybliss 3 года назад

You are very generous sharing your trade secrets. Sometimes home owners have to fix it themselves, as plumbers are in scarce supply around here.

@pauldunkley760 4 месяца назад

Really great, clear and simple to follow along video. Really appreciated it. Helped me out.

@Oldblokefromtipton 2 года назад

Great help, always seek your advice before trying minor tasks. Keep holding tight.

@plumberparts 2 года назад

Cheers!

@michaelmorgan7724 4 года назад

Used this approach on three basins, has worked a treat. Thanks

@ainet1611 5 лет назад

Thank you so much. You video is so clear and you explain everything so well. I couldn’t understand why the nut underneath was swinging around. - the screw driver trick! Brilliant.

@plumberparts 5 лет назад

No worries Aine!

@coleyboy83 8 лет назад

i always use plumbers mate. i also put it up top as well as under and bin the standard foam washer. I keep the plastic one underneath however. old school ways never die

@plumberparts 8 лет назад

YEAH! ;0)

@coleyboy83 8 лет назад

+plumberparts your my age 3pp. 32-33. we should no better lol

@peterbindon6486 Год назад

I’ve never replaced a basin waste before and hadn’t even heard of Plumber’s Mait 😂. Thanks for such an easy to follow video - full of handy tips 👍

@michaelangelasmith2047 Год назад

Thank you! Thank you! Thank you! Your advice on using plumber’s Mait was brilliant 👍🏾👍🏾 it worked a treat and immediately no leaks. Much appreciated 🙏🏾👍🏾

@SloggieBear 4 года назад

This helped me out a bunch! My first time using Plumber's Mait. Thanks for the help!

@heatherwilson4520 3 месяца назад

Fantastic video, I’ve live with a peeling non working pop up plug. Thought I’d need a new sink. Female 59 no experience watched the video and changed the old plug for a brand spanking new on. Many thanks 🎉

@normancarson7231 3 года назад

Helpful video. Not overly complicated.

@franrumbelow5294 3 года назад

Thanks for this, just managed to fit a whole new basin in our new house where the previous owner left completely non functioning taps! Used a combo of your videos, all really helpful and clear. Plumbers mait is my new favourite!

@mickyork41 4 года назад

Thanks for this video. So helpful. Bought a black unslotted waste for a little basin vanity unit. Made a plummer’s mait sausage exactly like you said, worked a treat first time just using the two washers supplied and my sausage. Superb. I watched another vid suggesting a load of PTFE would do the job too, and was tempted to use both, but I stuck to your method in the hope it would hold tight. And it does!

@Anon-ke4qb 3 года назад

FLUIDMASTER REPLACEMENT SILCONE FLUSH SEAL FOR CABLE DUAL FLUSH VALVE (25438)

@warwickbowen2755 2 года назад

Top man. You always do great entertaining and informative videos which are still concise enough to watch all the way through.

@mariaaldred3058 6 лет назад

Thanks so much. I went and got plumber putty works like you said. My taps are in and working.

@stuartdagnall186 3 года назад

As a novice diy plumber I followed your guide easily, but I found using too much Plumbers mait just squeezed up and blocked the overflow holes in the waste unit. I had to remove it, clean it out (messy) and re fit with less mait. Apart from that, all was great. Ps. The previous chap had fit it with possibly a full tube of sealant and it took 90% of the time to remove the old one and clean it up. Cheers Mait!

@kevinhancock4064 2 года назад

Could have removed the excess in 9verfkow from inside matey but good point

@vickismith8283 Год назад

Thanks great video. Previous plumber had used silicone!!! Plan to fail not fail to plan. Bit of a job scraping and cleaning the silicone off. Plumbers Mate seemed simple to use - hope it is as watertight.

@tonycousins7218 4 года назад

Great vid and thank you, rang up a plumber told him my sink was leaking and just needed the drain re-sealing .. quoted me £100 watched this and did it myself OAP with no plumbing skills .. easy

@kevinhancock4064 2 года назад

Blimey robbing bastard

@alizcool1 Год назад

Is that unfair? £10-15 for a good quality part. An hour's work. Using his own tools and time. Do the math. He needs to make his wage

@DanielDainty Год назад

Yeah, not an unfair price for an hour's experienced labour, especially because it would be his fault if your house became damaged or flooded after the work. Enjoy your free repair! 😅

@SteOver9000 Год назад

@@alizcool1yeah but some of us make a wage without ripping people off

@Paul-xk5os 11 месяцев назад

@@alizcool1he could buy all new tools and still get paid £70 for the hours work, not a fair price at all.

@N0MrGreen 3 месяца назад

Plumbers mait... Omg... Game changer. Thanks so much! Oh wait I forgot to smell it!

@degsycrosthwaite9416 4 года назад

Really helped, difference between doing it and it working or leaking, cheers.

@MrDot9 5 месяцев назад

I love those captive wastes , I always use them.

@sajcanax4767 Год назад

thank you. saved myself some money

@ryancoombs772 2 года назад

Tried to install a slotted waste with silicone and failed.. found this video and already had plumbers mait in the garage that I had forgotten about, worked first time, thanks for the video!

@ashleyevans1255 Год назад

Didnt know Ian Poulter did plumbing on the side 👍. Great vid .

@goldenrainbowwonderland4986 7 лет назад

Excellent video with humor included; a big help!

@plumberparts 7 лет назад

No worries mate, glad to help!

@carlleonard724 2 года назад

thank you for explaining this and having a great video. easy once you know

@mattgriggs6564 8 лет назад

Was eating some chocolate cake as James took the trap off 😂!!!! Awesome video mate

@plumberparts 8 лет назад

Sorry mate!

@adambayliss8768 Год назад

Brilliant, thanks …..sorted!!

@kevinhoward1516 4 года назад

I couldn't get the white plastic washers that are needed to prevent the plumbers mate tearing. The solution was to cut one to size from a plastic milk bottle. Worked a treat.

@davidkneale7455 3 года назад

Gloss paint ,putty and a handmade lead washer in my day! 😆

@hieveryone999 8 лет назад

DONT POOR TRAP DOWN THE BASIN. We've all been there

@plumberparts 8 лет назад

Ha! You're not wrong!

@traymil 3 года назад

More than once 🙄

@angelkotilainen 3 года назад

Lool i love that.

@conrote1 2 года назад

🤣🤣🤣

@jadbhodia1928 2 года назад

Super helpful as always!!

@lemonleon 8 лет назад

Did the overflow slots not move last minute?

@plumberparts 8 лет назад

+lemonleon yeah we moved it back but wasn't in the edit.

@GTtiOC 7 лет назад

How do you realign the slotted waste to the overflow ?

@pumpkinhead456 3 года назад

Just in case someone comes to this later, there's no real need to ensure they are aligned - the water collects in the throat of the basin and flows in to the slot anyway. If you think about it, it's a sealed chamber with only 1 way out!

@michellemonteath1775 4 года назад

Thank you for such a great video! So easy to understand! I have learnt a new skill whilst being in lockdown. I’m so chuffed I did it and didn’t have to ask hubby 😁

@Sovaccent 2 года назад

Excellent video, cheers mate!

@davidberneard 3 года назад

Much thanks for another great video, I had hoped to complete the job last night, but got stuck in something very simple, namely that the "new 32mm basin waste click slotted" unit I purchases has a diameter of 40mm, which is not a mistake, but a standard in the industry? which I get a good explanation for. While the ceramic hole in the washbasin is 32mm. I even managed to confuse the staff in Screwfix with this observation. :-)

@paullefur6213 2 года назад

Thanks! Plumbers Mait Tip now has me a leak free basin trap, tried the Dudley kit from ScrewFix but the washer was so deep would not allow the trap connection, a nice sausage of PM on the thread between the washer and nut screwed up splurged out and sealed all good.

@kh-wg9bt 4 года назад

Subscribed informative and entertaining. Trying to do more DIY guys like you are invaluable

@drlodge 6 лет назад

Brilliant thanks! have just put in a new basin and the waste leaks! Got a waste leak kit to pick up and have plumbers putty also so now I know what I'm doing :-)

@plumberparts 6 лет назад

Top stuff!

@munetonb 7 лет назад

thanks very much for the tips how change the basin waste you are very good

@garybarnes9029 4 года назад

Good tip regarding the plumbers mait(in the fridge). May not need it if your waste comes with two silicone washers though.

@Cassiopea456 5 лет назад

WOW what an amazing accent!!!❤😍

@plumberparts 5 лет назад

haha...thanks?

@Cumbriahandyman 8 лет назад

Thank you so much for the bonus in that video. Much appreciated.

@plumberparts 8 лет назад

Ha!

@benjaminlukehanna7791 Год назад

Thanks! Easy to follow and do yourself! I thought i might have to get someone in as the plug was stuck down. Subscribed in case I need this channel again in the future. But what am I supposed to do with all this leftover 'Plumbers Mait' now ? 😂

@siobhansimpson8688 3 года назад

Thank you! Feeling very pleased with myself that I've just successfully fitted a new plug on my own. My first ever plumbing task (aside from bleeding a radiator, but that doesn't count, I've been able to do that since I was about 10). Did take two of us with a grip each to get the old one out, think they had used a combination of plumbers mait and silicone!

@plumberparts 8 лет назад

Hope you guys enjoy!

@sephirothsoul999 8 лет назад

Had to 'hold tight' to my stomach ;)

@CurvedSlightly 8 лет назад

You not seen the squat/shallow traps?

@matthewthomas6960 4 года назад

Excellent video! Thanks very much! I'm sold on the Plumber's Mait too - on my sink it seemed to be leak-free first time (unlike when the original fitter used silicone :-P)

@martinjohnson4264 4 года назад

Thanks, off to get some Plumbers Mait 😀 Btw, with the trap being slightly lower why didn’t you just move the shelf down a notch, the cabinet had pre drilled holes?

@billycheung8836 7 лет назад

Thank you Plumberparts, you have saved my bacon :) My pop up sink plug in my bathroom has corroded to a point where you can virtually took the top half off and I have been deferred replacing a new one myself as I was quite scared of doing plumbing jobs until I saw your video and bought a new pop up sink plug from Amazon which is very similar to the one you demonstrated in your video. I followed your advice of using Plumber Mait and it works like magic. I now got a new pop up sink plug that doesn't leak :). Well done and many thanks for your useful video. But still not quite understand why did you have to insert a screwdriver into the plug during your replacement?! the plug still turned while you are tightening the plastic nut at the bottom anyway.

@plumberparts 7 лет назад

Just to stop it turning on tightening up. Cheers for the comments dude! SUBSCRIBE! ➡️👉 ru-vid.com 👈⬅️ IF YOU HAVEN'T ALREADY! 😎

@billycheung8836 7 лет назад

Hey Buddy, thanks for your feedback! By the way, have you got a video showing how to chemically clean a sealed central heating system? Thanks!

@TheKemics 3 года назад

having just scraped out some old silicone from a basin, I entirely understand your hatred of it! Great video, saved my bacon today! Thank you so much

@earthlyone 3 года назад

Thank you so much for this video. My bathroom sink has been taking 20 minutes to empty, your video gave me the insight I needed to fix it. I got the debris out of the 1”1/4 - 32mm Polypipe, realigned the seals in the ‘Polypipe to outside’ pipe & heightened the plug part of my push plug giving more of a gap as the plug hole. As a young woman, I have no idea how the ‘DIY disaster guy’ who I bought the house from put up with it or why he was unable to fix it! Thanks again, it’s great to learn from an actual professional.

@charlottereeds2900 4 года назад

Ah cushty video thanks. And the washer tip 👌🏻

@johnfrench8714 3 года назад

You explained how you line up the slots for the overflow, which was when you had the flip plug inline with the overlfow hole, but as you did up the nut it turned the waste about 45 degrees?

@ukxboy360 3 года назад

oh come on. He probably corrected it when he cut the video.

@jennifermedia6288 4 года назад

Love these. You are great. Love them. Wish I could do all these things. I need more tools and in not doing it for a living just a rental I need to do jobs myself,.

@illuminate06 3 года назад

So you don't need plumbers mate around the top side of the basin waste, just the bottom, right?

@devincarter7434 3 года назад

Instead of that plumbers mait can you use that thin white tape that plumbers use for the thread?

@adrianlee3635 3 года назад

I saw you took out the slude waste from underneath the basin pipe and threw it into the toilet bowl, Wouldn't it choke the drainage piping of the sitting toilet bowl? And also when you put the basin metal stopper, you aligned the hole for the over flow properly at first but towards the end I see it move away as you turn the screw nut below the sink after the plumber putty was used, then will the over flow work of its not aligned?

@tonyross2947 7 лет назад

LOVE your videos mate; going to be attempting my first plumbing job here (at home) tomorrow, so your tips are great. However, I noticed in this one, that in the final "tightening" part of the job, you'd spun the waste around (i.e. the flip-top stopper, which was aligned so that when it was open, it was "pointing" to the back of the sink, was finally pointing to the side of the sink). Doesn't that mean that the overflow wouldn't be aligned/working properly? Sorry mate.

@plumberparts 7 лет назад

All sorted after edit! SUBSCRIBE! ➡️👉 ru-vid.com 👈⬅️if you haven't already!

@nikolayberry-smith6409 3 года назад

You need to fix my basin ;) Rawr

@waqarashraf4934 3 месяца назад

Hello.. looks good.. a question though, when you were fitting the waste, it changed position by 180 degrees on your final tightening, so the overflow slots were not in the right place.. Did you fix it after? had my sink fitted 6 years ago, and only now noticed that mine is also the wrong way and overflow is full of gunk.. only remedy is to re fit the existing waste so it lines up

@peterhadfield8332 7 лет назад

Replaced my pop up waste a few weeks ago, been dripping ever since, well until I saw this video, fixed now, no drip = happy wife = happy me. #legend

@plumberparts 7 лет назад

Cheers Peter! Glad to help you in your marriage! SUBSCRIBE! ➡️👉 ru-vid.com 👈⬅️ IF YOU HAVEN'T ALREADY! 😎

@arthuritchybollix5064 3 года назад

What are the washers called cheers

@mjxdrones7123 2 года назад

Great video iv to do 23 of these pop up waste in a hotel ,first time doing this could you tell me the name of the plastic seal you used underneath as I would like to use these with the plumbers mate aswell ,cheers

@hrhbucket4268 3 года назад

You could probably make one of those washers from and old 4 pint plastic milk bottom in an emergency (if you did not have one). You might need to double it up as the plastic is quite thin.

@victormillward 6 лет назад

Brilliant, thank you

@kevinair7648 3 года назад

In a novice .do you have to put silicone on a twist bath pop up waste please cheers council kev

@brendansherlock6442 11 месяцев назад

Just finished, going shopping for a new sink tomorrow 😂. I overtightened it and it broke the ceramic around the drain. For anyone attempting this, I only did one extra wrench rotation after finding limit by hand, heard a hairline fracture so loosened it but too late. My advice, when tightening it, and you reach the limit by hand, go a quarter turn by wrench and leave it at that. Why do all DIY vidz leave out these critical things, ah well, live n learn eh

@lenafan492 6 лет назад

What is the name and size of the large washer you used with the plumber's mate? Thanks

@jayr7577 4 года назад

Did you ever find out what was the name and size of the washer? Also, was that some silicone on the washer before it was pressed on to the plumbers mait?

@lenafan492 4 года назад

@@jayr7577 I think it's called a close coupling or doughnut washer, but I'm not 100% certain

@nicam49 3 года назад

They're very common at plumbers supplies places, everyone knows what they are, but they don't have a name as such. Just measure the inside diameter in inches (probably an inch and a quarter 1¼") and ask at the counter. Tip: try Plumb Centers in the UK, they know their stuff.

@lindaellison7356 Год назад

Hi how would I hold the top of the pop up waste if there is no holes to put screwdriver

@jamesallison9690 3 месяца назад

Hi. Great video but I have an issue whereby I can't seem to get the pipe connected to the underside of the basin waste (I think it was previously bodged when it was connected to the old waste). What do I need to connect a threaded 40mm diameter basin waste on underside of sink to the push-in/compression seal 32mm diametee pipe I have? (If I could post photos I would!). Many thanks

@chitkianchan1317 2 года назад

I can't dislodge the basin stopper from the ceramic wash basin even after removing the nut. It just seems stuck or glued together.

@Nickbaldeagle02 8 лет назад

I use the rubber seal off a inch and a half McAlpine fitting and a lil bit of silicone. Never leaks.

@plumberparts 8 лет назад

Nice!

@S8250503 Год назад

Just about to do this job and found the dreaded silicone sealed "professional" job.

@mikeh9627 7 лет назад

This is a great tutorial video, however, you seem to miss the lineup of the holes with the basin-waste overflow holes.. If you notice at 7:42 the flip top plug is basically pointing to the 12 and 6 positions on a clock, 9:56 after you tighten it down the flip top now is screwey looking pointing between about 2 and 8..; that screwdriver didn't hold it in place too well.

@plumberparts 7 лет назад

It's just in the edit Mike and draining fine dude! As long as you've learned to do it like that in the video that's all that matters!

@antoasap8644 4 года назад

Enjoyed it pal tell me are p traps or bottle traps best for wash basins which is best.

@cje7010 6 лет назад

High i noticed on the chrome waste in the basin ,with the overflow at 12 o'clock,when inserted ,when you had finished the job the waste was more like at 20 to 2 ..will this affect the over flow rate ?..,,by the way ,thanks for all your help on different types of plumbing,great videos and clear instructions ..HOLD TIGHT !!!!

@michaelwebb1018 4 года назад

I'm fitting a new sink unit in our cloakroom and got a U-bend fitting for the waste. As the diameter of the threaded basin waste was 40mm I got a 40mm U-bend but it's too big to screw on. Similarly the old waste pipe out through the wall is also 40mm with a threaded end (may be part of the old system) but the nut on the U-bend is again too big to fit. Should I try a 32mm U-bend or bottle trap? MIKE

@richardlyons1199 8 лет назад

Haha I love plumbers mate! lasts forever too. evil stuff if warm love the fridge trick. also I was thinking how is he not retching at that, as I always do.. and then you mentioned it lol great video mate as always

@plumberparts 8 лет назад

Mate it was butters!

@karansaraf87 4 года назад

What is the name of that white plastic washer you used? Buying new basins and wastes and they don't come with the wastes I'm looking at.

@TheCarpentersDaughterUK 3 года назад

Thanks so much! I think I watched this years ago, but finally needed to do it on our narrowboat this afternoon after finding the sink was leaking with a siliconed drain. And you're right... the time consuming part was removing the silicone and cleaning it up. The rest was done in minutes!

@plumberparts 3 года назад

Hi Vikkie! No worries. Glad it helped. Totally random, but would you be interested in a collab? Doing some with a few other YT's in the DIY/construction trades. Let me know. If you're too busy with the narrowboat, no worries! All the best, James.

@TheCarpentersDaughterUK 3 года назад

Aww, thanks@@plumberparts - that would make my day! I've found with what I have experienced so far with plumbing, it's been empowering. I'm not sure what you had in mind, but I plan to follow more of your videos regarding updating the radiators on our boat, etc.

@stephenspry4318 6 лет назад

Hi can i ask if its worth putting a small amount of plumbers mait between the basin and rubber washer at the top and between the washer and waste itself making two extra seals ? Also what was that large transparent plastic ring helping to seal it at the bottom called. Cheers steve

@karlkellner9521 6 лет назад

Stephen Spry www.screwfix.com/p/arctic-products-poly-basin-waste-washers-1-5-pack/9904j

@Solidsnake0208 5 лет назад

Hi mate, love your videos. Just want to ask can you shorten a basin waste if it’s too long? I’ve got a tiled wall with an exposed trap and the sink can’t move, so only option is to buy a shorter waste or cut one down.

@Steel4083 6 месяцев назад

Emphasised about having the overflow lined up and then proceeded to over tighten the fixture, causing the overflow to be misaligned considerably.

@SimonGibbons-d9s Месяц назад

What's the washers called you used underneath

@tom-66 Год назад

I noticed the waste rotate during the last step. Does that mean the sink will now overflow?

@christopherchander2754 Год назад

Yes, the waste rotated and the slots are misaligned. Yes, the putty was squeezed through the slots and they are now sealed off. Have seen this many times. Unsure what is the correct way to install a slotted waste.

@christopherchander2754 Год назад

Sorry, yes, the sink will overflow. May as well just block off the overflow inlet.

@nuwanamilasiri699 3 года назад

Hi,may I know what is name of tool 🔧 remove the pop-up waste ?

@chrishall5178 Год назад

Perfect to follow, youtube does not get better than this to show how to get the job done. Easy info on what to watch out for and simple tricks. Yes plumbers mait every time. Avoid silicone nightmare at all costs.

@adrielogunjebe4890 10 месяцев назад

im in uni and this just happened to my sink. this video saved me

@hitmanh593 4 года назад

Great video, but what do you do when you come across a plug that hasn’t had plumbers mate on it previously, I.e silicone? How do you remove the silicone to get the old plug out?

@user-nw6mj1bb4x 2 года назад

I am a female in Australia and applied your technic and worked like a dream🙏 thank you for this how to video💜

@nomadlong85 3 года назад

Great video, i am looking for advice on how to unscrew a siliconed up pushup plug. Any tips as its not bloomin moving, and im a fit 30 something bloke! :-/

@plumberparts 6 лет назад

SO GLAD to still be helping all you guys out! Please ask questions below. Still ploading videos so please subscribe and follow me on Instagram here: www.plumberparts.co.uk/social.php?social=Instagram FANKS! ❤️