Тёмный

How to change a front shock strut on VW PASSAT 5 (B5) [TUTORIAL AUTODOC] 

Подписаться
Просмотров 30 тыс.
% 297

How to change a front shock strut on VW PASSAT 5 (B5) 1.9 Estate 10.2000 - 08.2005 [TUTORIAL AUTODOC]
Shock strut on AUDI A4 B5 (8D5) (11.1994 - 09.2001) / SKODA Superb I Saloon (3U4) (12.2001 - 03.2008) / AUDI A4 B6/B7 Convertible (8H7, 8HE) (04.2002 - 03.2009) / AUDI A4 B6 Avant (8E5) (04.2001 - 12.2004) / AUDI A6 C5 Avant (4B5) (12.1997 - 01.2005) cars should be replaced, as a rule, according to one and the same procedure.
However, there can be slight differences due to specific features of the vehicle design.
🔝 Top brands that produce shock strut: BILSTEIN; SACHS; MONROE; RIDEX; STARK.
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AutoDoc App - interstitials.onelink.me/1036709825?pid=RU-vid
🛒 On our website you will find a wide range of auto parts you are interested in: www.autodoc.co.uk/?RU-vid&
Springs: www.autodoc.co.uk/car-parts/coil-springs-10213?RU-vid&
Springs for VW PASSAT 5: www.autodoc.co.uk/car-parts/coil-springs-10213/vw/passat/passat-variant-3b6?RU-vid&
Shock absorber: www.autodoc.co.uk/car-parts/shock-absorber-10221?RU-vid&
Shock absorber for VW PASSAT 5: www.autodoc.co.uk/car-parts/shock-absorber-10221/vw/passat/passat-variant-3b6?RU-vid&
Strut mount: www.autodoc.co.uk/car-parts/strut-mount-and-bearing-10471?RU-vid&
Strut mount for VW PASSAT 5: www.autodoc.co.uk/car-parts/strut-mount-and-bearing-10471/vw/passat/passat-variant-3b6?RU-vid&
LIQUI MOLY Chain Spray: www.autodoc.co.uk/liqui-moly/9678170?RU-vid&
WD-40 Grease Spray: www.autodoc.co.uk/wd-40/13563346?RU-vid&
LIQUI MOLY Fast Cleaner: www.autodoc.co.uk/liqui-moly/13481014?RU-vid&
All video and pdf tutorials on VW PASSAT 5 parts replacement: download and watch at AUTODOC CLUB - club.autodoc.co.uk/manuals/vw/passat?child_model=passat-variant-3b5
🔔 Subscribe to AUTODOC's channel and don't miss new videos on car parts replacement ➜ ru-vid.com
Was this video helpful? Give it a thumbs-up and share it with your friends!
Have a look at other videos on our channel:
► VW car repair tutorial - ru-vid.com/group/PLWep5LzT0sxk10n9fThNMID2tdfVRg-yC
► VW PASSAT B5 car repair tutorial - ru-vid.com/group/PLWep5LzT0sxk0uZ3ifxA1jpsPFIWWZ6Wh
► How to replace front brake caliper on VW PASSAT 5 (B5) - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-qhoSOpgQzfI.html
► How to replace front springs / front coil springs on VW PASSAT 5 (B5) - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-PQ6tSMMoyMY.html
Mobile shop: m.autodoc.co.uk
📢 AUTODOC on social media:
Facebook: autodoc.co.uk
Twitter: autodoc_berlin
RU-vid: ru-vid.com
Instagram: autodoc_autoparts
Snapchat: www.snapchat.com/add/autodoc.uk
#autodoc #autodoctutorial
Disclaimer:
This video is intended for informational purposes only and does not guarantee achievement of a specific result.
It is recommended that you entrust the installation to highly skilled technicians to ensure the best result.
This video is intended for informational purposes only and does not guarantee achievement of a specific result. It is recommended that you entrust the installation to highly skilled technicians to ensure the best result. This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements that are a result of incorrect use or misinterpretation of the provided information. The user is personally liable for incorrect use of repair equipment, tools, or car parts, in particular when this use poses the risk of injury. AUTODOC strongly recommends taking appropriate safety precautions when carrying out any repair or replacement. Keep in mind that low-quality auto parts may not provide the appropriate level of road safety.
© 2019 AUTODOC GmbH All rights reserved

Авто/Мото

Опубликовано:

 

28 ноя 2019

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 33   
@petes4472
@petes4472 Год назад
Brilliant work...my garage charged for 2 hours to change the spring....you did the full job in 10minutes. Your mechanics are great.
@autodocuk
@autodocuk Год назад
Thanks for your positive comment! Stay with us!
@jamesedmondson7243
@jamesedmondson7243 2 года назад
Thank you for this video. I was helpful . Very informative and educational.
@autodocuk
@autodocuk 2 года назад
We are glad that our video was useful for you.
@jameswatkins29
@jameswatkins29 3 года назад
Great video, but the music is terrible and distracting.
@pgx452
@pgx452 Год назад
Volume down
@alexey9900
@alexey9900 4 года назад
Good 👍👍👍
@kingGar27
@kingGar27 6 месяцев назад
Good video and I'm a huge fan and customer of Auto Doc. I would advise against lubricating wheel stud threads though (14:15), but it's certainly worth cleaning all threads before reassembly to ensure torque figures are accurate. In fact, a lubricated thread should have a lower tightening torque - usually 10%-30% lower. So, chances are that those wheel nuts are overtightened at 120nm (with lubrication). Also, be careful applying copper grease too liberally to nuts and bolts after assembly. While it seems logical, do remember that grease attracts dirt. Best to use a pressure washer to keep wheel arches clean.
@autodocuk
@autodocuk 6 месяцев назад
We are sure that your comment will be useful to many of our viewers.
@Amer-yl4gb
@Amer-yl4gb 2 года назад
You dont need to remove the upper control arm mounting plate!!! There are 2 plastic cover under AC lines... you unscrew 2 nuts from the top and struts come out.
@autodocuk
@autodocuk 2 года назад
You are right, some moments in the video were missed, but our channel is not educational but is only for informational purposes. We strongly recommend that all replacements be made exclusively by a specialized service. AUTODOC
@bigfish7493
@bigfish7493 2 года назад
Thanks, torque settings would be helpful, save time. The bellows over the exposed strut, is that part anchored with a zip-tie or? The tech obviously knew the way through this procedure however any suggestions for checking the upper and lower control arms while they are relaxed? I'm putting "new" in regardless...your presentation is appreciated...thanks again....my last job for Spring removal etc was 1978. Time flies.
@autodocuk
@autodocuk 2 года назад
You are right, some moments in the video were missed, but our channel is not educational but is only for informational purposes. We strongly recommend that all replacements, especially those related to the brake and running systems, be carried out exclusively at a specialized service.
@Senaalud
@Senaalud 3 месяца назад
Hello, what is the name of the part that is betwen the spring and the strut mont (orange one), great work👌
@autodocuk
@autodocuk 3 месяца назад
This is a shock absorber's bump stop.
@Foerris
@Foerris 4 года назад
At 36-37. How do you know you install the upper strut mount in the correct angle? According to the Hayne's Book about my 2001 passat, it says the angle should be about 11 degrees - but they don't tell/show how I easily can make sure the angle is right.
@autodocuk
@autodocuk 4 года назад
Thank you for your comment. Unfortunately, it is quite difficult to make this kind of adjustment in garage conditions. Therefore, we recommend t contact the service center after replacing that to adjust the position of the wheels and the position of the upper support. Best Regards, Autodoc team
@arthurfouquet5051
@arthurfouquet5051 2 года назад
Don't remove it!
@joeterlisner7686
@joeterlisner7686 3 года назад
There are different torque specs in the subtitles than in actual video. I used the higher one and sheared a stud off my new strut before I even got there.
@autodocuk
@autodocuk 3 года назад
All our videos are for informational purposes only. You can familiarize yourself with all the moments of tightening directly in the technical documentation for your car or use the help of the auto maintenance service. AUTODOC
@arthurfouquet5051
@arthurfouquet5051 2 года назад
I did it without removing the top upper control arm mounting plate, pretty sure it was from one of your videos that I did it. Did you change your way?
@autodocuk
@autodocuk 2 года назад
Thank you for sharing your experience, it will be very useful information for us and our viewers, we will definitely take this into account in our new videos. AUTODOC
@bigfish7493
@bigfish7493 2 года назад
As others have commented... The music!! I'd rather listen to Bach, or silence.
@dzenan9331
@dzenan9331 6 месяцев назад
Is it same like the older B5 3B (1996-2000)
@autodocuk
@autodocuk 6 месяцев назад
It is not possible to answer your question unambiguously, you can find out this information in the technical documentation for repairing your car.
@jorgemoncayo8588
@jorgemoncayo8588 3 года назад
2006 vw
@spikedropakabongogaming2
@spikedropakabongogaming2 2 года назад
im fixing that car
@diegt4716
@diegt4716 8 месяцев назад
How many balkan guys in here?😅
@Senaalud
@Senaalud 3 месяца назад
Evo me,usput znas li kako se zove ovaj dio sto ima zeljezo i gumu na sebi sto dodje izmedju opruge i ove gore narandzaste gume, to mi je otislo a ne znam kako se zove a samo mogu naci ovaj odbojnik sto je na videu narandzasti
@ProctorSilex
@ProctorSilex 3 года назад
4:50 BS! The lower strut bolt is oriented the other direction on mine. Factory or some idiot mechanic?
@ProctorSilex
@ProctorSilex 3 года назад
I had to remove the subframe bolt holding the front control arm. The control arm could then move up just enough to barely clear the rear control arm and work out the bolt.
@brianmcmillan2272
@brianmcmillan2272 2 года назад
Yeah that’s correct. It leaves the factory with the bolts fitted in the other direction.
@poulthomsen5042
@poulthomsen5042 5 месяцев назад
Any chance of making the music and narrator even more annoying? 😉