How to change front brake discs and front brake pads on VW PASSAT B5+ TUTORIAL | AUTODOC

autodoc.co.uk

Подписаться 389 тыс.

Просмотров 105 тыс.

50% 1

How to change Front brake discs / Front brake rotors / Front Disc Brakes / Front brake pads on VW PASSAT B5+ TUTORIAL | AUTODOC
Top brands that produce brake discs and brake pads: BOSCH, STARK, SACHS, SKF, VAN WEZEL, VALEO, LuK, MAPCO, A.B.S., ATE.
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AutoDoc App - interstitials.onelink.me/1036...
On our website you will find a wide range of auto parts you are interested in: goo.gl/1eB20I
Brake discs: goo.gl/i5wCwD
Brake discs for VW: goo.gl/iAS8im
Brake discs for VW PASSAT Variant: goo.gl/3QiFbf
Brake pads: goo.gl/ULUP6m
Brake pads for VW: goo.gl/QOFr7t
Brake pads for VW PASSAT Variant: goo.gl/eIu14K
VW Car parts: goo.gl/kZLaQQ
► How to replace fuel filter on VW PASSAT B5+ - • How to change fuel fil...
► How to replace a rear brake caliper on VW PASSAT B5+ - • How to change a rear b...
► How to replace a tie rod end on VW PASSAT B5+ - • How to change tie rod ...
📢 AutoDoc in social media:
Facebook: / autodoc.co.uk
Twitter: / autodoc_berlin
RU-vid: / autodocuk
Instagram: / autodoc_autoparts
#autodoc #autodoctutorial
Disclaimer:
This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements, that are a result of incorrect use or misinterpretation of the provided information. This video is for informational purposes only and does not guarantee achievement of a specific result. The user is personally liable for incorrect use of repair equipment, tools or car parts, in particular, when this use poses the risk of injury. AUTODOC strongly recommends being careful and adhering to the safety rules when doing any repair or replacement. Keep in mind that using low quality auto parts does not guarantee the proper level of road safety.
⚡ AUTODOC CLUB - club.autodoc.co.uk
Add your car to the AUTODOC CLUB garage and get personal recommendations on repair intervals - club.autodoc.co.uk/?to=/user/...
❱❱ Install the AUTODOC CLUB App - club.onelink.me/d2X8?pid=yout...

Авто/Мото

Опубликовано:

6 июн 2016

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 62

@autodocuk 6 лет назад

00:45 - Use a simple screwdriver to take brake caliper spring out 02:13 - Use an end bit №7 03:19 - Using a special tool press in the brake caliper piston 03:57 - Use a socket №17 On our website you will find a wide range of auto parts you are interested in: goo.gl/eGfRjf Brake Disc: goo.gl/qyiouv Brake Disc for VW: goo.gl/R7gZxg Brake Disc for VW PASSAT Variant: goo.gl/H5x4KL Brake Pad Set: goo.gl/CcqNQp Brake Pad Set for VW: goo.gl/mMhAzV Brake Pad Set for VW PASSAT Variant: goo.gl/FHFL6K VW Car parts: goo.gl/QE8CYA ► How to replace fuel filter on VW PASSAT B5+ - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-BlihalCBZlk.html ► How to replace a rear brake caliper on VW PASSAT B5+ - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-fg9ytDKg0Z8.html ► How to replace a tie rod end on VW PASSAT B5+ - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-anbSSWrMWI4.html

@ArtoKV 5 лет назад

03:57 - Yes, really use a socket №17, 18 mm might spoil your bolts. And these bolts are kept tight... What is B5+ I don't know. Our Variant 1998 I think must be B5, has no caliper springs and needs no end bit №7 but a 13 mm socket.

@bradengraeme1011 3 года назад

I like how y’all just get right into it not talk for an hour and a half

@lorenzoparedes2306 3 года назад

It's wonderful when the mechanic gets right down to business. No talking, no introductory graphics and loud rap music.

@autodocuk 3 года назад

Thank you for sharing your opinion! AUTODOC

@anthonymcgrath1948 7 лет назад

Thanks so much for making these tutorials, so far I've replaced front and back discs and pads, track rod ends, front stabiliser links and rear bump stops, and the car sailed through the MoT, cheers, and keep up the good work.

@autodocuk 7 лет назад

Thank you for the feedback! We are glad that our tutorial was helpful for you. Stay tuned and follow our latest updates. Best regards, Autodoc.

@autodocuk 7 лет назад

Leave us a comment saying what videos you'd like to see on our channel.

@yongyutsrisook5048 7 лет назад

autodoc.co.uk

@stratnuts 7 лет назад

GREAT thanks. you make it look so easy. JB

@autodocuk 7 лет назад

Thank you for the feedback! We are glad that our tutorial was useful for you. Best regards, Autodoc.

@davewilson5463 4 года назад

Great video 👍👍

@jimmurphy5739 3 года назад

Good vid. Thx! I get to do this today, less the hoist and nice lighting. But as a consolation, and I know I risk making many of your followers jealous in the extreme, I get to do this in the snow at minus 8°C! Ha! And you thought Canada was just warm dry fields of wheat blowing in the summer sun and vast virgin forests filled with poplar-nibbling beavers! Ha! Gotta run now and shovel the car out so I can get to the wheels. (All kidding aside, Thanks again!)

@autodocuk 3 года назад

We are glad that this video was useful to you!

@oscargarcia3646 6 лет назад

Excellent tutorial. Explain step by step

@autodocuk 6 лет назад

Thank you for the feedback! We hope that our tutorial was helpful for you. Stay tuned and follow our latest updates. Best regards, Autodoc.

@rc.attucks 7 лет назад

Excellent video!!

@autodocuk 7 лет назад

Thank you for the feedback! We are glad that our tutorial was helpful for you. Stay tuned and follow our latest updates. Best regards, Autodoc.

@advanced268 6 лет назад

I thank you for help me I hope you show more good luck

@autodocuk 6 лет назад

Thank you for the feedback! We hope that our tutorial was helpful for you. Stay tuned and follow our latest updates. Best regards, Autodoc.

@jjon95 4 года назад

Huge help! The only tip I have for other performing this job is that a 7mm hex key (Allen Key) is the same as the No7 used in this video.

@autodocuk 4 года назад

Thank you for your comment! This information will be very useful for our viewers. Best Regards, Autodoc Team

@jjon95 4 года назад

@@autodocuk No problem, keep up that great VW/Audi B5+ tutorials!

@mohamedshaaban7234 7 лет назад

Nice Job, can you help me with the way of changing Spark plugs ( not coils)

@autodocuk 7 лет назад

Thank you for the feedback! We are currently working on creating a wider range of tutorials including those that you mentioned. Please, follow our updates on the videos. Best regards, Autodoc.

@Jorge-vr4wj 7 лет назад

Do I have pop the good open and take the cap off of the brake fluid container that's underneath the hood? It didn't see him doing that in the video. On American cars, I have had to do that in the past. Idk if it's different for German vehicles. Thank you!

@autodocuk 7 лет назад

Thank you for the feedback! Most modern cars are equipped with a valve in the reservoir of the brake fluid reservoir, however, we do not recommend you to replace the brake system yourself, because your safety depends on it, you should contact a certified service station.Best regards, Autodoc.

@raoulduke7553 5 лет назад

Does he mean 7mm Allen key when he says “end bit #7” ?

@autodocuk 5 лет назад

Thank you for your feedback! Correct, a 7mm hex head is need for caliper guide pids. Best regards, Autodoc!

@gslevegsleve 7 лет назад

Very nice job

@autodocuk 7 лет назад

Thank you for the feedback! We are glad that our tutorial was useful for you. Best regards, Autodoc

@miloudbahari8605 7 лет назад

dizelpompe

@miloudbahari8605 7 лет назад

autoonderdelen

@diamari91 5 лет назад

I need to get the male connector part of the brake pad wear sensors for an 03 vw passat fwd v6 model! Pls haaaallllppp!!

@autodocuk 5 лет назад

Thank you for your feedback ! Everything depends on brake system design of your car. If your car uses such part, then to replace this unit, you need to disconnect the electrical connector. Best regards, Autodoc.

@n9wox 4 года назад

My 2000 Passat came with wear sensors, and I don't use them anymore. I think I had to connect the two wear sensor wires together to keep the sensor from turning on the dash.

@trekworldracing9787 5 лет назад

Why make extra work by splitting the pad carrier from the caliper. Just remove the two caliper bolts and remove the caliper as a whole. Pads still come out just as easy

@autodocuk 5 лет назад

Thank you for your feedback! Unfortunately, each car requires particular replacement and everything depends on a technical condition of car parts units. Our videos are informative as to the replacement sequence, and it's always up to you how to replace a car part. Best regards, Autodoc.

@advanced268 6 лет назад

I like it

@autodocuk 6 лет назад

Thank you for the feedback! We hope that our tutorial was helpful for you. Stay tuned and follow our latest updates. Best regards, Autodoc.

@casaborg 6 лет назад

Why you dont lube the caliper pins, It is not necesary on german cars? Thanks

@autodocuk 6 лет назад

"Thank you for the feedback! Our videos are provided for information purposes only and show general principles of vehicle maintenance. To save time, we do not show torque, cleansing and lubrication of parts, and other stages of replacement and servicing.Best regards, Autodoc. "

@advanced268 6 лет назад

How to replace ignation coil with spark plug same this car Best regards

@autodocuk 6 лет назад

Thank you for the feedback! We are currently working on creating a wider range of tutorials including the one you mentioned. Stay tuned and follow our latest updates. Best regards, Autodoc.

@honestguy7764 4 года назад

no copper grease on the pads?no cleaning the discs?

@autodocuk 4 года назад

Thank you for your comment! We will take this into account in our new videos. Best Regards, Autodoc team.

@adamkorekach9936 Год назад

When you say “Use number 7 End Bit,” does that mean a 7mm bit?

@autodocuk Год назад

Yes, No. 7 corresponds to 7 mm.

@4chankrozb 4 года назад

with this video I will do it alone. No need to pay at local workshop.

@autodocuk 4 года назад

Thank you for your positive feedback! We're trying our best to make our videos as comprehensible as possible. Best Regards, Autodoc Team

@nekokyuketsuki3778 7 лет назад

does the brake lines still need to be bled?

@autodocuk 7 лет назад

During the brake system maintenance, in some cases the technology involves bleeding, but we strongly recommend to do this in a specialized car service center. Best regards, Autodoc.

@ArtoKV 5 лет назад

Not if you don't for example change the hose too.

@TopSecretVid 4 года назад

I have this car and pad carrier bracket bolt is NOT 17mm....it should actually be 18mm

@moonsun1108 3 года назад

It is 18mm in this video.

@EvoLAtiR 5 лет назад

This tutorial didn't show the importance to clean the new disks with brake cleaner, the importance to lubricate the guide pins, the importance to use threadlocker on the bolts and the correct torque to tighten up. In my opinion this tutorial is very incomplete.

@autodocuk 5 лет назад

Thank you for your feedback! Some moments of the replacement procedure have been skipped in order to make the tutorial easier to watch for our viewers. We appreciate your remarks and we will most certainly pay attention to them in the days ahead. Best regards, Autodoc!

@firststreetoddities4427 4 года назад

Why in the fuck does the brake pad need a sensor?

@autodocuk 4 года назад

Thank you for your comment. For pads, a wear sensor is used, which signals the replacement of pads when they are worn. Best Regards, Autodoc team.

@firststreetoddities4427 4 года назад

@@autodocuk Can it cause the ABS light to come on in the brake light to Flash if one For more is bad?

@robwells5753 3 года назад

Skip the into man just make a vid plz

@autodocuk 3 года назад

Thank you for your feedback! We appreciate your attention to the details. Our experts will look into it. Stay tuned for more videos in the days ahead. Best regards, Autodoc team!