How to rebuild rear brake caliper - VW Audi Skoda Seat - New piston and seals (COMPLETE GUIDE)

Подписаться 36 тыс.

Просмотров 3,6 млн

50% 1

This video is showing how you can handle with seized brake caliper, in this particular case we have brake caliper from AUDI A4 2.5 tdi, 38mm piston diameter. But many same calipers are in different cars like passat golf etc. Video is showing how to change old seals and brake piston. To be able to use it again for long time. ( COMPLETE GUIDE ) !
More "how to" videos related with brakes you can find here:
• How to rebuild front b...
• How to replace rear br...
• How to replace front b...
Cars guide DIY assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Cars guide DIY recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Cars guide DIY, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Cars guide DIY.

Авто/Мото

Опубликовано:

14 янв 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 555

@philb707 5 лет назад

Great video, in the process of doing this, couple questions. 1. Do you have a link to the exact seeger ring pliers? I bought some but they arent long enough 2. How did you know what position to put the ebrake arm back on in? 3. What is the grease in the small squeeze tube that you used?

@carsguidediy 5 лет назад

Hi, thanks for asking. 1. I'm using very similar to this one: Long Nose 50 mm Snap Ring light duty Internal Circlip Pliers 1.2mm Tips link: www.ebay.co.uk/itm/Long-Nose-50-mm-Snap-Ring-light-duty-Internal-Circlip-Pliers-1-2mm-Tips/310147049669?_trkparms=aid%3D222007%26algo%3DSIM.MBE%26ao%3D2%26asc%3D20140122125356%26meid%3Dd088e3cc8dc340c8bb478d24bd08e1c8%26pid%3D100005%26rk%3D3%26rkt%3D7%26mehot%3Dag%26sd%3D183517365085%26itm%3D310147049669&_trksid=p2047675.c100005.m1851 2. I always take a picture before I disassemble something, but anyway when you put back hand brake cable bracket it has got some kind of bumper at the end, bended part 90 deg ( ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-YHPX8lEHFKs.html#t=11m35s in video, on the left side) and ebrake arm have to touch this bumper or be as close as possible. 3. It's silicone grease for brake piston , safe for rubber elements, www.ebay.co.uk/itm/Silicone-PTFE-Lubricant-Grease-For-Brake-Pistons-Valves-Taps-Joints-Gaskets-6ml/162730609118?epid=1754588867&hash=item25e38009de:g:uUEAAOSwESdcbHzT

@CRiCU90 5 лет назад

@@carsguidediy You shoud use it on all ruber.

@pr0xZen 4 года назад

@@CRiCU90 Some applications here demand lubricant properties that PTFE can't really deliver.

@gottmituns3225 4 года назад

@@pr0xZen How can you tell ,why are you so sure❓❓❓👍🏻

@pr0xZen 4 года назад

@@gottmituns3225 Because PTFE starts to deteriorate at 260°C and it decomposes beyond 350°C 🙂 Several components in auto brake (caliper) assemblies get _much, _*_much_* warmer than that, especially during extended or heavy application. "Ordinary" brakes are entirely friction based. When you clamp the brakes to stop, the kinetic energy of literally ton(s) of mass traveling at (high) speed, within just a few seconds, is converted _almost entirely_ into heat. Like, *_a lot_* of heat. Super duper mega-a-lot 😊 Hence silicon lubricants Because they can "take the heat" (and don't really evaporate) ^^,

@stevecobratei8538 7 месяцев назад

It's great to see there are still people willing to rebuild calipers. Just one way different. Do not put grease in the O ring grooves. Grease the O ring are it's installed. Why? Because the grease under the O ring will make it tighter and wear out fast. O rings only need lube on the surface that moves. Great video 😅

@swampwader5558 2 года назад

A level of skill and attention to detail rarely seen in a commercial environment - I’d take a properly rebuilt OEM caliper over a cheapo reman 100% of the time. Well done. 👍

@alemar3135 4 года назад

Veoma pedantno,veoma precizno,veoma poučno i korisno za sve kojima ne smeta da malo zaprǉaju ruke.Hvala majstore 👍🏻🙏🏻

@vempriex 4 года назад

Explains why calipers are expensive with such small parts. Glad it can be a rebuilt and excellent video.

@FORDSKIN 5 лет назад

Great video! I was looking for this exact thing about 6 months ago and coulnd't find anything as well detailed as your video. You have a new subscriber.

@szabolorant2681 5 лет назад

You read my mind, I was also repairing my rear brake system last summer and looking for something like this:))

@loriracicot6069 4 года назад

Thank you. Its very much appreciated. As a heavy duty mechanic I enjoyed your work. Keep it up

@tigron.4376 3 года назад

Amazing job ! No Lyrics, just clean work. I thank you for this video !

@MrTheHillfolk 4 года назад

Thanks man!! i'm hanging out at the shop, going thru a whole mk4 Jetta. I got held up on what I was doing, and there is never nothing to do. So I need to repair a caliper anyways (it's on a lengthy list) and I have the kit, so here I am on a Saturday night. I guess there's no brakes being put on this party!! Folks, don't worry I have a day job. Thanks again.

@333oberon 3 года назад

One of the best videos showing the handbrake self-adjuster parts inside the brake piston. However, you did put the spring and bearing back to the brake piston in opposite direction compared to the position they were installed when you took them out.

@JynxCSL 5 лет назад

What a awesome video helped me out loads fully restored the rear calipers on my astra vxr

@tadekrafa4121 5 лет назад

W końcu jakiś porządny poradnik.

@user-nf8zz3ju8s Год назад

Great video, very detailed. Just finished this job and I would like to add one bit of information in case someone needs it. You MUST compress the handbrake mechanism before you install its circlip. If you don't you will never be able to properly seat it and the handbrake will not work. I used my brake calliper wind back tool with a suitable socket to hold it down while getting the circlip in place. You can check afterwards by manually operating the handbrake lever and seeing if the piston continues out which is the correct way.

@caioramos5198 2 месяца назад

so before putting the last clip back in place i need to put the piston inside the caliper, compress it, remove the piston and than install the circlip?

@user-nf8zz3ju8s 2 месяца назад

@@caioramos5198 Not the piston. The part where he puts the handbrake mechanism back into the calliper at 9:06. You need to compress it slightly on the metal surface surrounding the big thread or the circlip won't be seated even though it looks like it is. The way to check is to operate the handbrake lever at the end like he did at 12:53 and the piston should keep coming out of the bore. If it doesn't the circlip is not correctly seated and the handbrake will not work.

@rytisbalsevicius8632 Год назад

This man showed a quality work

@SujoyShivde 4 года назад

What a beautiful video. Thoroughly enjoyed

@DaBuzz92 5 лет назад

I have the same problem now with handbrake. Thx for video! Lets start restoration :)

@marcelgentea8000 27 дней назад

Este foarte detaliat 10 nota,puțini știu a face un tutorial.Din cît se vede astai profesia din vare faci banii

@ronnyhaldorsen2740 3 года назад

Excellent work. Really helpful, made the job a whole lot easier, thanks!

@daibennett9224 4 года назад

You make this look to easy man,for me I wouldn’t never attempt this,but you make it look easy,top job

@eazy2hate 2 года назад

Lmao why? It's not hard at all

@suj1945 5 лет назад

Excellent video. You are a competent worker.

@pr0xZen 4 года назад

Great video, thanks a bunch! Saved me from scrapping a caliper and buying a new one - local dealers are extremely expensive, and shipping here is so costly it's more to return the old "core" than the core deposit in return. I'm gonna need some of that mechanism though, road salt and rust got in there really good.

@pikherc4739 4 года назад

Precizno, pedantno i čista 10.Svaka čast za trud...

@danielfl.9347 5 лет назад

This was so relaxing

@mayronbolitari632 4 года назад

Piękna robota widać że dla siebie👍:)

@mohammedafzal2990 Год назад

Top class video best on RU-vid I have ever seen please load up more. Kind regards from uk.

@maegscale 5 лет назад

One of the best videos I have seem. Will be using this to help me to dismantle a caliper from a Peugeot 407 which is the same design.

@Gogo2409 4 года назад

And 307 is the same.

@JamesGadbury 2 месяца назад

Thank you so much. This video helped me massively! The main rubber boot piston seal was a bit of a fiddle, but got there! 😂

@samymalak8859 5 лет назад

Great video and explained everything exactly thank you so much keep up the good work

@johnfox1943 Месяц назад

This video saved me big time. Thank you for sharing your experience!!!

@mdma7762 5 лет назад

Great!!! I needed a DIY on how to rebuild caliper.

@carsguidediy 5 лет назад

Thanks!! ;)

@kennethturbolifedonald4807 5 лет назад

Well done mate great video 👌

@starstuff0614 2 года назад

Amazing video, very thorough thanks for sharing.

@dRGhosto 4 года назад

finally helpful video! first normal "car dude" on ytube.

@dirkvanbesien Год назад

Goede en leerzame video. Ik was vooral benieuwd naar het mechanisme van de handrem. Nochtans opletten voor mensen die niet volledig op de hoogte zijn van remtechniek. Remmen blijven zeer belangrijk en ik vrees voor de amateur technieker die fouten gaat maken. Voor hen is het misschien beter om een nieuwe te kopen of het werk uit te geven aan een ervaren technieker.

@mijtec 2 года назад

Just about to do this on my E34 5 series - thanks for sharing very useful !

@figjam5181 8 месяцев назад

Great instructional video. Congratulations. One comment I would like to make is I have never seen that type of contamination before on a brake caliper. It is like a gooey oily substance. Normally they are covered in dry brake dust.

@arshadmahmood7201 3 года назад

Love this video step by step guide well-done

@VierImageStudios 3 года назад

You're a life saver. Thank you.

@Eye-it-azz Год назад

You’re a God, I’ve looked everywhere on earth on how to rebuild my Kia Rio calipers, i was about to spend $120 on 2 new rear ones. Video says Volkswagen but the caliper is the same as a Kia Rio’s

@DL-kl7ec 2 месяца назад

I don't think they have the same mechanism. I disassembled an OE Mando caliper, but I found it's practically impossible to rebuild/reassemble the caliper parts back without some type of special tool. There are 2 springs you need to compress to put the circlip into the groove.

@oorangejuce 5 лет назад

Great video. Helped me!

@a.k.2023 5 лет назад

Nice job! With some grease works better than new! 👍👍👍

@goranromersombor5923 5 лет назад

Svaka čast.

@neogeo106 4 года назад

Thank you so much for the video!

@jeromegoux2172 Год назад

Congratulations for your tuto. Good work. I understand now how it works. And all this without speaking!!!

@TrenerCS2 Год назад

Thanks for this guide!

@ballsack4321 3 года назад

Thank you mate, most excellent video.

@darmovoz 4 года назад

Дружище ты мегакрут. 👍👍👍. Ты вдохновил меня. Пойду переберу суппорты.

@atowninytown859 3 года назад

I really appreciated this video. I'm going to attempt to rebuild my rear calipers on my 03 Olds Aurora, it has a similar piston style. At 1st I wasn't sure how to do it but because of your video I'm confident that I can do them now! However I was wondering why you didn't paint the caliper before doing rebuild? Anyway was still a great video!

@screwsnutsandbolts 5 лет назад

Great video 👍🏻

@PeterEndelt 5 лет назад

Nice work 👍

@lexyell 4 года назад

The music made me feel like I was having my caliper refurbished in Nando’s ! Lol

@andywt8460 3 года назад

These Lucas style rear calipers are fitted to a huge range of European cars & vans, they come in differing size & alloy or steel, and are very simple to repair, having said that I just fitted a cheap-O to my T4 Cali camper, after 2 attempts to get the adjuster to leave some pad-to-disc clearance causing the brake to drag and excessive pad wear I gave up, I’ll have another go when I have time as I want the original Lucas back on my 21 year old VW van.

@edwardm9227 3 года назад

Done mine 💞 thanks, FYI I found the seat Leon kit cheaper than the VW one?! Seat kit same and fitted fine,good luck to all ☺️

@jayveecee1 4 года назад

Thank you very much, awesome vid!

@greenmanlove1 Год назад

very helpful video thanks for posting

@swingmanic 4 года назад

Great video! 👍👍

@LordVestik 4 года назад

I like this alot this is very professional work, good job.

@peterhilbert6428 4 года назад

Thank you for taking the time to make this excellent video. Can you tell me if the internals are the same for a 2001 audi a6. I have read that for some older audis removing the seeger ring will cause the spring to explode outward if it is not compressed first.

@back2nature788 3 года назад

Fantastic job! I will try it! Now I know why the mechanic replaced the whole caliper instead of rebuilding it. He unscrewed two bolts and a banjo bolt and just bleeded it in the end.

@m.k.sm.k.s5157 5 лет назад

This is a fantastic job

@Nedialkata1 4 года назад

Thank you ,great video :)

@graemewoods8151 4 месяца назад

Good video. You do love that grease !! 😂

@pirvanmarin8083 2 года назад

Bravo lucrat foarte curat

@aka50centjimmy95 Год назад

Finally got it👍I am gonna do the same thing with my damn car.thanks a lot dude

@douglasalonso2440 2 года назад

Great explicación Es un tesoro este video Saludos de MECATRONIC 🇲🇽🤗

@marioflorr487 5 лет назад

Toata stima! Thanks!

@ranashahbaz5716 5 лет назад

Sir very good work and nice viedo

@melissa6793 3 года назад

Alot of goood work there. Makes me think wonder if I would rather buy a factory recon caliper for around £50-£70

@danielmiklas4893 5 лет назад

Amazing

@matthewbaxter7502 2 года назад

Very helpfull video thankyou for taking the time to post it.😊👍 Can you use red rubber grease for the whole process?

@nicolaeparaschiv6599 5 лет назад

multumesc excelent...

@cezarstefanseghjucan 4 года назад

La mulți ani, de ziua familiei!

@johnjordan4716 Месяц назад

excellent vid thanks

@BLACKPHOENIXRIZIN 2 месяца назад

Extraordinary, simply extraordinary!!!!🙂🖖✌

@mecanicadsm Год назад

Aprendo muito você parabens...

@duboiscorinne6203 Год назад

trés beau travail, très explicite , je m étonne que vous démontiez sans avoir nettoyé un peut l ensemble ,pour plus de visibilité !!sinon parfait ,jp

@huseyinozdil2503 4 года назад

thank you,it was a perfect expression.

@bagshotjoe1118 3 года назад

Brilliant vid. Off to do my BMW mini calipers now.. What music is this, stuck in my head now..!!

@adeelautosworkshop373 Год назад

Excellent working method

@darioza10 4 года назад

Gratuluję, bardzo dobrrra rroobbboottaaaa

@user-hq7hy4wr4i 2 года назад

Это называется профессиональное комплексное обслуживание суппорта!👍

@leorincon8674 3 года назад

Great video

@okanus2417 3 года назад

Great video.. thanks.. do you know how much the piston moves when you pull the lever? I mean the ratio of the movement between lever and piston...

@noellopez9021 5 лет назад

Yes 👍👍👍👍

@sdorce1 2 года назад

awesome video

@VijayaKumar-dl1wq 4 года назад

Great job

@claude6988 4 года назад

J'aurais du voir cette vidéo avant de démonter mon étrier, sur cette vidéo j'ai appris entre autre qu'il fallait mettre d'abord le soufflet sur le piston et ensuite dans la gorge de l'étrier. Merci Cars guide DIY

@gerrys6265 Год назад

Thank you so much...brilliant!

@EVOL315 5 месяцев назад

Adam piston tamir etmiyor insan ameliyat ediyor 😊 ne kadar özenli ve temiz çalışıyor 😊birde bizim ustalara bak toz lastigini tornavidanin keskin yeriyle yerine yerleştiriyor

@Rayfaedundee 3 года назад

Fantastic video and very detailed strip down and rebuild of a VW rear brake caliper. Only bit I didn’t understand was when you screwed in the piston after the rebuild then unscrew it to remove it to put the outer dust shield onto the piston. Was there a setting you have to do before fitting the outer dust cover to the piston. But great video.