Dear ChrisFix, Thank you very much for your video. I have a question about a front wheel bearing. My car is Honda CR-V 1997. The Honda Service says that front suspension parts, including the knuckle, upper and lower arms, sway bars, etc., should be replaced, except the front wheel bearing. I wonder why they didn't mention replacing the front wheel bearing. Is it because it is in good condition? I bought a new knuckle. When replacing it, can I use an old front wheel bearing to put into a front knuckle?
Hi, I have to do this job to my friend's car but I also have to remove both front CV shafts to have new outer boots fitted. Do you have a tutorial on this process? Seems with removal of the tower I will be able to undo the nut (36mm?) and just slide out the shafts.
Thank you for the feedback! We are currently working on creating a wider range of tutorials including the one you mentioned. Stay tuned and follow our latest updates. Best regards, Autodoc.
During the assembly it is recommended to lubricate the bolting with the graphite grease. This will facilitate the further maintenance and repair. The bolts will not rust and take a strong liking. Best regards, Autodoc.
How would you perform this repair without removing the battery? I have been struggling to remove the 2 screws the guy is tightening at 10:55 holding the battery plate in and have no access to the bolt holding the upper control arm in place. How can I do this without removing the battery?
