No video :(

How to change front suspension arm on VW PASSAT 5 (B5) [AUTODOC]

autodoc.co.uk

Подписаться 397 тыс.

Просмотров 24 тыс.

50% 1

How to change front suspension arm / front control arm on VW PASSAT 5 (B5) 1.9 Estate 10.2000 - 08.2005 [TUTORIAL AUTODOC]
Suspension arm on AUDI A4 B5 (8D5) (11.1994 - 09.2001) / SKODA Superb I Saloon (3U4) (12.2001 - 03.2008) / AUDI A4 B6/B7 Convertible (8H7, 8HE) (04.2002 - 03.2009) / AUDI A4 B6 Avant (8E5) (04.2001 - 12.2004) / AUDI A6 C5 Avant (4B5) (12.1997 - 01.2005) cars should be replaced, as a rule, according to one and the same procedure.
However, there can be slight differences due to specific features of the vehicle design.
🔝 Top brands that produce suspension arm: RIDEX; STARK; FEBI BILSTEIN; LEMFÖRDER; MOOG
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AutoDoc App - interstitials....
🛒 On our website you will find a wide range of auto parts you are interested in: www.autodoc.co...
Suspension arm: www.autodoc.co...
Suspension arm for VW PASSAT 5: www.autodoc.co...
LIQUI MOLY Chain Spray: www.autodoc.co...
WD-40 Grease Spray: www.autodoc.co...
LIQUI MOLY Fast Cleaner: www.autodoc.co...
All video and pdf tutorials on VW PASSAT 5 parts replacement: download and watch at AUTODOC CLUB - club.autodoc.c...
🔔 Subscribe to AUTODOC's channel and don't miss new videos on car parts replacement ➜ www.youtube.co...
🛠️The tools you need to replace front suspension arm:
- wire brush
- WD-40 spray
- brake cleaner
- copper grease
- combination spanner No.16
- combination spanner No.18
- drive socket No.13
- drive socket No.15
- drive socket No.16
- drive socket No.18
- wheel impact socket №17
- ratchet wrench
- torque wrench
- pin punch
- hammer
- crow bar
- hydraulic transmission jack
- fender cover
- wheel chock
Was this video helpful? Give it a thumbs-up and share it with your friends!
Have a look at other videos on our channel:
► VW car repair tutorial - • VW car repair tutorial...
► VW PASSAT B5+ car repair tutorial - • VW PASSAT B5 car repai...
► How to replace front brake discs and front brake pads on VW PASSAT B5+ - • How to change front br...
► How to replace rear shock absorbers on VW PASSAT B5+ - • How to change rear sho...
Mobile shop: m.autodoc.co.uk
📢 AUTODOC on social media:
Facebook: / autodoc.co.uk
Twitter: / autodoc_berlin
RU-vid: / autodocuk
Instagram: / autodoc_autoparts
Snapchat: / autodoc.uk
#autodoc #autodoctutorial
Disclaimer:
This video is intended for informational purposes only and does not guarantee achievement of a specific result.
It is recommended that you entrust the installation to highly skilled technicians to ensure the best result.
This video is intended for informational purposes only and does not guarantee achievement of a specific result. It is recommended that you entrust the installation to highly skilled technicians to ensure the best result. This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements that are a result of incorrect use or misinterpretation of the provided information. The user is personally liable for incorrect use of repair equipment, tools, or car parts, in particular when this use poses the risk of injury. AUTODOC strongly recommends taking appropriate safety precautions when carrying out any repair or replacement. Keep in mind that low-quality auto parts may not provide the appropriate level of road safety.
© 2019 AUTODOC GmbH All rights reserved

Опубликовано:

28 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 41

@autodocuk 3 года назад

Hi everyone, unfortunately incorrect tightening torques were given in some parts of the video: At 7:01, the correct tightening torque is 50 N⋅m At 7:42, the correct tightening torque is 22 N⋅m At 10:03, the correct tightening torque is 40-50 N⋅m At 9:51, the correct tightening torque is 90 N⋅m

@StuffOffYouStuff 2 года назад

awesome production. thanks to all involved.

@autodocuk 2 года назад

Thanks for your positive comment! Stay with us!

@BlueCrow7 3 года назад

As an added bonus, it would be super helpful if the parts being removed/replaced were named as a subtitle or even better, a microfiche layout. It's good to see how it all connects and the sequence.

@phoenixabram1981 3 года назад

instablaster

@ianp5403 9 месяцев назад

What is the correct height setting for the arm? If the bush is tightened at the wrong rotational position it will not work well and wear out.

@autodocuk 9 месяцев назад

It is not possible to answer your question; you can find this information in the technical documentation for repairing your car.

@adamcrook7603 3 года назад

Great videos, clear & concise instructions 👍🏻

@autodocuk 3 года назад

Thanks for your positive comment! Stay with us!

@evh3811 3 года назад

Why did you only replace the one control are instead of both?

@colingreer853 2 года назад

great video, however, good luck with removing the long pinch bolt on the top control arms that easily!

@autodocuk 2 года назад

Thank you for sharing your opinion! AUTODOC

@damian31vag 4 года назад

dobra robota :) fajny film

@richiec9077 4 года назад

Also you don't need to remove the top mount from the shocker to change the arms

@ProctorSilex 3 года назад

I hope so. Thanks

@melcruz672 3 года назад

I have to do this so you saying i don't have to remove strut

@richiec9077 3 года назад

@@melcruz672 you have to remove the strut with the top mount still attached but you don't need to separate the top mount from the strut(shock absorber) if you're only changing the upper control arms

@richiec9077 3 года назад

The newer Audi group cars are better designed most of them allow you to remove the upper control arms with out removing the shocker it's all about the space and access available on certain models remeber and tighten the upper arms in a raised position taking into account the weight of the car when on the ground you can potentially destroy the new bushes before time

@richiec9077 3 года назад

The worst bit of the job is removing the long pinch bolt from the hub carrier assembly , you usually need heat and a good course of action

@ciprianionutapetroaie7314 Год назад

Hi, the front suspension arms of the Volkswagen Passat have a code on them, how do you know which is left and which is right, thank you, I'm waiting for an answer

@autodocuk Год назад

Please contact our Customer support team and we will definitely try to help you.

@patrickjrgensen738 3 года назад

Good video

@alexey9900 4 года назад

Good 👍👍👍

@jamesfrommalta8681 4 года назад

How do you know when needs to replace?

@autodocuk 3 года назад

Thank you for your comment! There are a number of symptoms of the wear of the suspension arm: - the car moves to the side when the steering wheel is straight; - steering is indistinct or, conversely, very sensitive; - the car starts to scour, and you have to "catch" it. This is especially felt even in a small rut; - while driving over bumps, a knock or the grinding sound is heard; - the squeak is appeared when turning wheels - the uneven wear of the tire tread; - The wheel responses to steering with delays; - when braking, the car pulls to the right or left. If you feel at least one of the symptoms, we recommend you immediately to visit the proffesional car workshop for a complete diagnosis and replacement of the worn out unit. Stay tuned with us! Best regards, Autodoc team!

@jakeeames725 3 года назад

The clamping bolt is so rusted is stuck and I can’t remove it

@autodocuk 3 года назад

Thank you for your comment! Unfortunately, we do not have such a video, but we can recommend a playlist for Mercedes-Benz S W140: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-6wXQVrz1cD8.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-xwC9_HZvIoU.html Stay tuned with us and follow our new tutorials coming every week. Best Regards, Autodoc team

@dimitartashev2724 3 года назад

Калници в тоя цвят имаш ли коланга?

@autodocuk 3 года назад

The body parts sold primer Please contact our Customer support service, where we will definitely try to help you with the selection of a wing for your car. Best Regards, Autodoc team

@brianmcmillan2272 4 года назад

Sorry guys but you’re making this look an easy job and it is one you get that top pinch bolt released ,but it never comes out easily on a car this age. It’s usually rusted solidly and requires some serious work to release it unless you have the special too to drift it out. And that bottom shock absorber bolt is traditionally fitted by VW the opposite way round and doesn’t pull completely out as it hits the other arm. Sorry but this is over simplification of a job that many might now tackle and find ,they cannot do.

@autodocuk 4 года назад

Thank you for your comment! Unfortunately, on each machine, the complexity of the replacement is individual, it all depends on the technical condition of the parts. Our videos are only informative in the sequence of replacement and to save time, we weaken some nodes earlier. Best Regards, Autodoc team.

@brianmcmillan2272 4 года назад

autodoc.co.uk What a poor response

@BatoosTech 3 года назад

I can help you remove the pinch bolt in 5 minutes. But you need a new pinch bolt after removing the old one. Get a drill theat can work only with hammering no rotation. Now get a star shaped drill bit theat is smaller then the bolt. I think I don't need to tell you the rest. Have a nice day.

@BatoosTech 3 года назад

@@brianmcmillan2272 comment up

@richiec9077 4 года назад

Haha that's fucking hilarious there's no way the pinch bolt will come out like that haha good luck trying that one for yourself ,no amount of wd40 will help and that shitey wee punch will not do shit to the majority of these seized in pinch bolts, hahahahaha

@autodocuk 4 года назад

Thank you for your feedback! Some of the elements of this replacement procedure have been skipped in order to make this tutorial easier to watch for our viewers. Be sure to subscribe to our channel in order to watch more useful videos in the days ahead. Best regards, Autodoc team!