How to change front wheel bearing on OPEL ASTRA H TUTORIAL | AUTODOC

autodoc.co.uk

Подписаться 389 тыс.

Просмотров 104 тыс.

50% 1

How to change Front wheel bearing / Front Wheel Bearing Kit / Front hub Bearing / Front wheel Hub Bearing on OPEL ASTRA H TUTORIAL | AUTODOC
Top brands that produce Wheel Bearing: BOSCH, STARK, SACHS, SKF, VAN WEZEL, VALEO, LuK, MAPCO, A.B.S., ATE.
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AutoDoc App - interstitials.onelink.me/1036...
On our website you will find a wide range of auto parts you are interested in: goo.gl/1JPxMz
Wheel Bearing: goo.gl/n9jZgv
Wheel Bearing for OPEL: goo.gl/9emOVn
Wheel Bearing for OPEL ASTRA H: goo.gl/M7iOS0
OPEL Car parts: goo.gl/QR8SeF
Mobile Shop: m.autodoc.co.uk
► How to replace rear brake discs on OPEL ASTRA H - • How to change rear bra...
► How to replace rear suspension coil springs on OPEL ASTRA H - • How to change Rear Spr...
► How to replace front wiper blades on OPEL ASTRA H - • How to change front wi...
📢 AutoDoc in social media:
Facebook: / autodoc.co.uk
Twitter: / autodoc_berlin
RU-vid: / autodocuk
Instagram: / autodoc_autoparts
#autodoc #autodoctutorial
Disclaimer:
This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements, that are a result of incorrect use or misinterpretation of the provided information. This video is for informational purposes only and does not guarantee achievement of a specific result. The user is personally liable for incorrect use of repair equipment, tools or car parts, in particular, when this use poses the risk of injury. AUTODOC strongly recommends being careful and adhering to the safety rules when doing any repair or replacement. Keep in mind that using low quality auto parts does not guarantee the proper level of road safety.
⚡ AUTODOC CLUB - club.autodoc.co.uk
Add your car to the AUTODOC CLUB garage and get personal recommendations on repair intervals - club.autodoc.co.uk/?to=/user/...
❱❱ Install the AUTODOC CLUB App - club.onelink.me/d2X8?pid=yout...

Авто/Мото

Опубликовано:

2 окт 2016

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 98

@chainlearn Год назад

Thank you Auto doc I just finished changing mine. I would like to point out to people who are wanting to replace theirs to have a 1/2 Torx socket set ready as most wheel bearing come with those rather than 18mm socket in this video.

@autodocuk Год назад

We are sure that your comment will be useful for many of our viewers.

@Strange_92 11 месяцев назад

Yeah, at least on mine they are E-Torx bolts. I don't think these car have many "normal" bolts

@andrewstirrat1628 7 месяцев назад

He make that look so easy, when i got to do mine,its gonna take 3/4 x as long

@dylanwalsh195 3 года назад

Do you have to use that special tool you use to get the rod off?

@robertbruce1696 6 месяцев назад

How lovely clean All the parts are and so easy to be removed not in real repairs SET UP

@susanemery6976 7 лет назад

Hitting the threaded end of the driveshaft with a steel hammer is a good way of damaging the thread. Best to leave the old nut at the end of the shaft to protect the thread or use a soft headed hammer.

@autodocuk 7 лет назад

You are absolutey right. A plastic hammer or a mediator between the nut anf the steel hammer. Best regards, Autodoc team.

@jcee4239 4 года назад

You beat me to it lol That was the first thing I noticed. You’re absolutely right! Leave the nut on at the end of the shaft and let the nut take the beating instead of the driveshaft threads. I’ve seen many of them get damaged because of this little mistake.

@zekshajduk8854 Год назад

Great video. Thanks. 😍👌🔥

@PhOnEJ4cKeR 6 лет назад

Great vid going to attempt this myself!

@autodocuk 6 лет назад

Thank you for the feedback! We are grateful that you appreciate our media! To see more interesting content stay tuned. Best Regards, Autodoc.

@nebepisk 5 лет назад

Really professional work. Thank you so much!

@autodocuk 5 лет назад

Thank you for your feedback! We are happy that our video appeared to be useful for you. If you have any questions, please, feel free to ask. Best regards, Autodoc.

@nebepisk 5 лет назад

autodoc.co.uk I changed my bearing just watching this video. But it took me 2 hours to finish tho :D thanks!

@lululhad7948 5 лет назад

This is not professional at all. Hitting the driveshaft, no torquedowns...

@HuDz1966 5 лет назад

Do you supply this kit for a Vauxhall Corsa 2011 1.7 CDTI (disk). Cheers.

@autodocuk 5 лет назад

Thank you for your feedback! You can contact us through our website , and we will select the car parts for your car. Best regards, Autodoc.

@007westy 5 месяцев назад

Do you need a code reader,with new wire,you plugged in,thanks

@nigelfeeley3594 5 лет назад

Great helpful video ,have ABS light on zafira B ,might give it a go now.

@autodocuk 5 лет назад

Thank you! Cool! If you have any questions, please, feel free to ask. Best regards, Autodoc.

@mist3ral 5 лет назад

Did you sort it mate? Ive got near side rear speed sensor issue and considering having a go myself.

@nigelfeeley3594 5 лет назад

@@mist3ral yes ,not to bad to fit, brought this, www.ebay.ie/itm/FRONT-WHEEL-BEARING-HUB-ABS-SENSOR-5-STUD-VAUXHALL-ZAFIRA-B-2005-ONWARDS-NEW/161081246961?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 , cheap but done the job,been on over a month now,no ABS light.

@madisonthorpe8442 7 лет назад

Keep it up bro

@autodocuk 7 лет назад

Thank you for the feedback! We hope that our tutorial was helpful for you.Stay tuned and follow our latest updates. Best regards, Autodoc.

4 года назад

Do you have the torque for each bolt? It would be very helpful.

@autodocuk 4 года назад

Thank you for your comment! Unfortunately, it is not possible to clarify the tightening torque, however, we will definitely add this information in our new videos. Stay tuned with us. Best Regards, Autodoc team

@jakewilliams7706 4 года назад

And all done without a torque wrench to torque the bolts down to spec

@kongtoy 5 лет назад

Would it be possible for you to show how to replace the timing belt on this vehicle please

@autodocuk 5 лет назад

Thank you for your feedback! Such works are rather difficult and time-consuming, we don't think that we are going to carry out them. We strongly recommend our customers that , for such replacements,they contact Car Specialized Service only. Best regards, Autodoc.

@budycelyn 7 лет назад

is this the same procedure for the zafira b ?

@autodocuk 7 лет назад

Thank you for the feedback! To answer your question we need to know the modifications of exactly your vehicle. Best Regards, Autodoc.

@simdrive9778 6 лет назад

Yes same process on my zafira b vxr,

@josephbaagi34 6 лет назад

hEY! WHERE DO U STAY? I WANT U TO HELP ME ON REPLACING FRONT WHEEL BEARING. I'M STAYING IN RUSTENBURG

@autodocuk 6 лет назад

Thank you for your feedback! Our shop is in Great Britain. please, turn to your Specialixed Car Service Centre. Best regards, Autodoc.

@Garyrsts2 4 года назад

Advice for people. Do not hammer the end of the driveshaft ffs. Could destroy the threads.

@paulr3237 2 года назад

Do they sell those coveralls or whatever that dude is wearing in the States? The last time I saw something like those was in that Willy Wonky movie. Great videos.

@dosgos 2 года назад

hahaha. Every mechanic in Europe wears those types of clothes.

@gavind6524 Год назад

Hi could you please list all the tools required for this job?

@autodocuk Год назад

You can watch a similar list here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--pdBiADP7ik.html&ab_channel=autodoc.co.uk AUTODOC

@MONIEDAUD 5 лет назад

Is this place in Poland??

@autodocuk 5 лет назад

Thank you for your feedback ! This place is in Germany, as well as our warehouse. Best regards, Autodoc.

@Sedonauk 7 лет назад

Great tutorial but I didn't see him put a split pin on the bearing nut before putting the cap on...

@autodocuk 7 лет назад

Thank you for the feedback! In this case, there is no need to put a split pin on the bearing nut. Best regards, Autodoc.

@eddieronayne3463 6 лет назад

Rubbish. There is. Also, you should never use impact to tighten - refer to SKF, one of the largest bearing makers in the world.

@lululhad7948 5 лет назад

Pretty sure these are self-locking nuts

@novakae1 5 лет назад

hi i have problem with brake disks, i replace them and after 3-4k km steering wheel start shaking and the problem is in the disks they got fucked up... can this problem come from wheel bearing ? i give 200$ for every 3-4k km for a new set of brakes wtf

@autodocuk 5 лет назад

Thank you for your feedback ! There can be plenty of reasons for it.. We recommend that you contact the Car Specialized Service for full diagnostics and to reveal the reasons for the malfunction. Best regards, Autodoc.

@Cam-dh4pb 4 года назад

Rotors are fucked warped

@MeaHeaR Год назад

Took him 13+ Minuuts Pro-Bubbly táké mé att Léást 6 Mónthś 😁😁😁😁😀

@paulhart1705 7 лет назад

Not a torque wrench in site?

@autodocuk 7 лет назад

Thank you for your feedback! To save your time some technical nuances has been missed in the video. In practical terms the torque wrench should be used. Best Regards, Autodoc.

@hmarold 6 лет назад

These videos are really misleading and dangerous, I'm shocked they haven't altered their procedure. No torque wrenches, parts jammed back in over rust and grit, a hammer used on the bare threads of the driveshaft (!!). Sloppy stuff and will get people into trouble. Hopefully no one is killed because they didn't tighten something up properly.

@hmarold 6 лет назад

autodoc.co.uk So show the use of a torque wrench! And a wire brush wouldn't kill you either. You have a responsibility to show best practice, not short cuts.

@stevenhumphries8595 2 года назад

Watched this video and thought, hey, I can do this. Two taps on the drive shaft and came lose. No chance. Hit the life out of mine (with nut on), tried a bar across with g clamps. Would not budge. Absolute nightmare. Gave up in the end. Crucial tool missing in this video. Wheel bearing hub removal tool. Should have shown this on video, then, not having one myself, I wouldn't have started the job. The rest helped though.

@autodocuk 2 года назад

Thank you for your comment. We are constantly working on improving our videos, we will definitely take this into account in the next videos. AUTODOC

@raducumucu1 Год назад

In reality no bolt comes off and you have to heat them or extract them. Also tge smaller one that holds the brake disc always breaks un half an must be extracted. And the wheel hub will never go off unless heated and hut hard with tge hammer

@autodocuk Год назад

Each step of replacement is quite unique when do a car repair, hence we cannot display all problems when replacing. Moreover it is not so easy to handle them yourself at home. To avoid this, we always recommend specialized car services.

@twig614sm 7 лет назад

wish mine came apart this easy I can not get the 32mm nut off no matter what I do

@autodocuk 7 лет назад

Thank you for the feedback! We are glad that our tutorial was helpful for you. Stay tuned and follow our latest updates. Best regards, Autodoc.

@daneaito7367 6 лет назад

Put back the break disk and press the break pedal with the engine on...Put some WD40 on it, heat it with a flame then try to nut off the 32mm....thats what i did and it worked

@ReconTHG 5 лет назад

Handbrake on, 1st gear, wheel chock at the front, centre cap off (I use large piece of sticky butyl), deep socket with breaker bar+jack handle (I have full sized jack with hollow handle of over 1m long). Removed CV nut with that method no problem. Just be careful not to stretch your back muscles :)

@thepremierlyricsking 7 лет назад

less mime and more talking. otherwise great job

@autodocuk 7 лет назад

Thank you for the feedback! We are glad that our tutorial was useful for you. Best regards, Autodoc.

@LambySRI Год назад

They do not just tap out like that. 😂 If onky. Try working in the uk 👌

@castrolgtx5064 7 лет назад

The music is head wreaking

@autodocuk 7 лет назад

Thank you for the feedback! The sound can be tuned off on the panel below the video. Best regards, Autodoc.

@AdammP 6 лет назад

Springer spaniel you just got your ass kicked, lol

@4321blastof Год назад

Fatening axle nut by pFatening axle nut by pneumatic wrench is very bad idea, same as hammering directy into axle. To disassembly axle, fasteing nut should be screwd few spins uside dow into axle then you can use hammer. Simple but this is the principle of mechanics. Never fasten screw and nuts by pneumatic wrench Never use hammer directy into threaded axle

@autodocuk Год назад

Thanks for the clarification, your comment will be useful for us and many of our viewers.

@johnnyhardcastle 5 лет назад

Totally unrealistic. You’ll find everything is ceased on and every step of this take hours.

@autodocuk 5 лет назад

Thank you for your feedback! Our videos are just informative, we just show the replacement process. When dismantling,the work complicacy is particular for each car, as car owners take care of the technical units of car in a different way. Best regards, Autodoc.

@johnnyhardcastle 5 лет назад

autodoc.co.uk This was me venting my frustration. This video and some others helped me get the job done

@jamesgolynski2289 4 года назад

@@johnnyhardcastle 😂😂😂

@matsstenberg8115 3 месяца назад

This guy is not a professional technician, he always uses an air driven nut driver when he assembles parts that usually need to be torqued. Sometimes it gets too loose and sometimes too tight. You could at least say that these nuts should be tightened with a certain torque.

@autodocuk 3 месяца назад

Our videos are only for informative purpose. All regulatory replacements and values can be found directly in the technical documentation for your particular model of car or use the help of a car service.

@philip.aocallaghan4602 8 месяцев назад

And the bearing falls out... 😂😂 I replace these a lot and never has the bearing ever come out easily. If you are showing the public tips on removing these, at least keep it real. and show them the reality of how difficult this can be. People tackle this type of repair not knowing what's ahead because of videos like this one.

@autodocuk 8 месяцев назад

We cannot show all the nuances and problems during replacement; this is all individual and it is not always possible to solve them at home. To avoid this, we always recommend that replacements must be carried out by specialized car services.

@philip.aocallaghan4602 8 месяцев назад

@@autodocuk Yes but you are showing members of the public how to do specific work on their cars, people who have never held a spanner before will attempt this in the hope it is as easy as shown..And that could be further from the truth. It is easy to show the difficulties of removing that wheel bearing. and it would be more beneficial than not showing .. so people can see first-hand what can lay ahead..

@Admin-pp8xi 5 лет назад

This is not showing how to replace the bearing. This is the complete hub. Change your video description.

@autodocuk 5 лет назад

Thank you for your feedback! It is a hub in the assembly with the bearing. Best regards, Autodoc.

@TommyGames97 5 лет назад

autodoc.co.uk you can’t buy a whole new hub from dealer complete with bearing this is very misleading and has been reported

@sekopiski 5 лет назад

@@TommyGames97 The hell are you on about? The bearing is built in to the hub, you can not replace it separately.

@TommyGames97 5 лет назад

@@sekopiski you can replace them you need a press but seems like you dont know

@sekopiski 5 лет назад

@@TommyGames97 Well then, give me a link to a bearing that fits into this hub.

@Deamonfury 5 лет назад

You liar an old bear wouldnt come off that easy

@autodocuk 5 лет назад

Thank you for your feedback! The complexity of the replacement depends primarily on how worn out the car parts are. Our videos contain only suggestions in replacement procedures, we recommend you contact your garage to get a proper assistance. Kind regards, Autodoc!