How to change fuel filter in Volvo 2.0D Ford 2.0TDCi Peugeot 2.0HDi 136PS Citroen

Подписаться 193 тыс.

Просмотров 240 тыс.

50% 1

Replace diesel fuel filter in your Volvo, Ford, Peugeot or Citroen car with 2.0D, 2.0HDi or 2.0TDCi engine (136PS) as a part of regular maintenance service.
This tutorial will guide you through the service procedure with step-by-step instructions on how to easily change used fuel filter in your car.
Check how to prime fuel system in this engine: • Priming fuel system in...
This engine can be found in:
Citroën C4, C4 Picasso, C5, C8, Jumpy / Dispatch
Fiat Scudo, Ulysse
Ford Focus MK2, C-Max, Galaxy, Kuga, S-Max, Mondeo MK4
Lancia Phedra
Peugeot 307, 308, 407, 508, 607, 807, Expert
Volvo C30, C70 II, S40 II, S80 II, V50, V70 III
More at mr-fix.info/
Music by Dan-O at DanoSongs.com

Опубликовано:

9 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 61

@arnoldmias 4 года назад

Thanks for the video. I have manage to change it. Its definitely a go for.

@TATEXPRESSINC 4 года назад

Keep up to great work on the videos

@Y1AN1 5 лет назад

Brilliant video gave me the confidence to do it myself!! Thanks

@petermarusich3923 3 года назад

Yes I agree with the comment below regarding woolen gloves, the fibres could block or restrict the diesel flow, Mmmm .

@kabovill 6 лет назад

Please make a list of tools needed. Size and torque

@tmg.lymington 6 лет назад

What size is the socket you use to unscrew the filter cover? Thanks!

@michalvavrina8255 2 года назад

27. I tried 26 but 27 was better.

@andrislevi 8 лет назад

super video!👍

@mrfixpl 8 лет назад

+Andris Locmelis thank you!

@tomlasz3326 8 лет назад

:) thanks Men a just have a problem whit fuel filter

@mrfixpl 8 лет назад

+tom last happy to help!

@therealcrazyal454 2 года назад

Do you know how to prime fuel system ?

@mrfixpl 2 года назад

Try this: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-KdoE6-QmAoo.html

@ivanmirkovic9670 3 года назад

You showed everything but did not show most important. How to prime the system from air.

@mrfixpl 3 года назад

I did. In separate video.

@sourwords1808 8 лет назад

wait, what about how to prime system? any tip please?

@mrfixpl 8 лет назад

+No Way there's next video about that: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-KdoE6-QmAoo.html

@sourwords1808 8 лет назад

+mr-fix could you be kind enough to tell me where do you get these line plugs that you are using after disconnecting them?

@mrfixpl 8 лет назад

+No Way they came with the fresh filter

@alc3837 3 года назад

Hi, mr-fix, can you tell me where are the heaters or glow plugs. Thanks :)

@mrfixpl 3 года назад

Engine glow plugs are at the back of the engine. You would have to remove EGR with the EGR cooler to access them.

@alc3837 3 года назад

@@mrfixpl Thanks bro!!!!

@Saakaszwili1 8 лет назад

Wydaje mi się że lepiej jest wylać całe paliwo z pojemnika wstawić nowy filtr zakręcić i tłoczyć paliwo strzykawką wlotem dolotowym paliwa aż zacznie się przelewać wylotowym i dopiero zamontować węże

@mrfixpl 8 лет назад

+Saakaszwili nie trzeba wtłaczać paliwa. przy odpowietrzaniu i tak filtr się napełni.

@Saakaszwili1 8 лет назад

ostatnio tak zrobiłem i obyło się bez odpowietrzania pęcherzyki powietrza się nie pokazują : )

@mrfixpl 8 лет назад

+Saakaszwili czasem w tym silniku występuje pompka w baku - wtedy odpowietrzenie w ogóle nie jest problemem. Można też podłączyć węże do filtra, potem odpiąć wężyk powrotny z pompcy wysokiego ciśnienia do baku i sprężonym powietrzem dmuchać do baku przez ten wąż. Wtedy powietrze przepcha paliwo przez cały układ.

@marcinb6528 4 года назад

Witam,czu pęcherzyki powietrza w przewodzie z filtra do pompy to norma ,czy gdzies jest nieszczelnosc?

@mrfixpl 4 года назад

Skoro jest powietrze, to jest nieszczelność.

@mrconta Год назад

So? how do i prime the system? and then? video stops before its all done

@sourwords1808 7 лет назад

Hi I might need your help again😁 on my ford focus 2.0 tdci engine, could you please tell me where is the ignition wire is located at the enginebay? I would like to install drl led lights and connect it to my ignition wire to turn it on. Thank you for time.

@mrfixpl 7 лет назад

Look inside engine bay fuse box. You should find a fuse or relay that's ignition-hot.

@sourwords1808 7 лет назад

mr-fix thanks again. in the fuse box I was able to find anunocupied ACC slot. 🖒

@michaeltarpey9411 3 месяца назад

What size is the socket?

@johnbower 4 года назад

You have just demonstrated how little you know about changing a fuel filter correctly, first take those filthy gloves off and put some clean ones on, and before fitting the new filter you should have cleaned out the lower section of the filter housing, this lower section of the housing is there to collect water and other debris from the fuel as it passes through.

@vidvidbiker Год назад

.......and how do you prime the fuel lines. You did not show the whole process. Now I have to look elsewhere😢

@mrfixpl Год назад

I did, in separate video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-KdoE6-QmAoo.html

@jumboqk 4 года назад

Hi what size is the socket you used

@zeez9053 3 года назад

Dont think he wants to answer you .Just measure it with ruler

@SuperHammys 7 лет назад

Hi Mr Fix, I have air bubbles in my fuel line causing the car to be sluggish at low speeds and low revs. Where would the air be getting in at?

@mrfixpl 7 лет назад

Sometimes it's the fuel lines, sometimes the filter body is cracked, sometimes all you need to do is replace a seal on the fuel line.

@7302ab 6 лет назад

where do you get those caps from

@mrfixpl 6 лет назад

It was part of the replacement set.

@amana1480 3 года назад

4:06 "Then prime fuel system" - how?

@steviezxr 7 лет назад

Does this assembly have any means of removing filtered out water? Ie more traditional type fuel filter housings have a valve/tap at the bottom to drain out water. Thanks

@johnbower 4 года назад

s, yes there is a drain nipple at the bottom of the filter housing, but he did not bother using it and left some fuel in the bottom of the housing, this is just one of the mistakes he made, he obviously is not aware that this lower section of the filter housing is there to collect water and other debris from the fuel as it passes through.

@degeneratejay5669 4 года назад

My housing is so tight that the plastic where the socket cups onto is being damaged.. any tips on how to help loosen the top of the housing?

@degeneratejay5669 4 года назад

I've got a breaker bar and a hollow piece of circle steel pipe for leverage aswell

@oneway1403 4 года назад

Same problem here the plastic head just rounded off. Tried heating with heat gun and packed the sides with aluminium tape. Got it to move 1/16 turn and then was totally stuck again. Not sure how to get it off now?! Got

@SergioRS75 3 года назад

Luego no arranca.

@mrfixpl 3 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-KdoE6-QmAoo.html

@johnstonlee Год назад

Didn’t show how to prime

@mashukali4874 7 лет назад

does it make a difference if we actually change the fuel filter

@user-vy2kt3uy5i 7 лет назад

Hi, I was trying to do mine earlier but the fuel filter top will not unscrew and as its plastic its starting to round off. Any tips how I can get it to loosen please? looks so easy in the video, typical :(

@steviezxr 7 лет назад

Baz F Maybe get an oil filter strap around as much of the body as you can.

@romas_krd 3 года назад

Also forgot to bleed air out

@mrfixpl 3 года назад

I did in next video.

@BenEvolent1988 8 лет назад

I've got a Ford Mondeo 2012 MK4 Diesel 2L and the fuel filter is at the rear of the car, not in the engine bay. This video is correct for mine: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Po4BddwSJ1Q.html

@mrfixpl 8 лет назад

+BenEvolent1988 Great tip. Thanks for your comment!