How to change Oil, Spark Plug & Air Filter on a Ryobi Pressure Washer - (Honda Engine Maintenance)

Подписаться 2 тыс.

Просмотров 33 тыс.

50% 1

Today we tackle the maintenance on a Ryobi 3300 PSI Pressure Washer featuring a Honda engine.
Full maintenance including replacing the air filter, spark plug and oil.
Recommended: (Double check size and specifications for your particular model)
Honda Oil: amzn.to/3APCME4
Funnel Set: amzn.to/3Qpljbw
Extension Set: amzn.to/3AYHKOW
Ratchet: amzn.to/3RGIxLl
Spark Plug: amzn.to/3qhRi2H
Air Filter: amzn.to/3qppXeQ
Oil Catch Pan: amzn.to/3cV8urL
Used In Video:
Extension & Wrench Set: amzn.to/3Bk1D4C
Socket Set: amzn.to/3x7lfX3
Honda Oil: amzn.to/3APCME4
Disclosure: TheHouseMann is supported by our audience, some of the links above are affiliate links. This means that, at zero cost to you, TheHouseMann may earn an affiliate commission if you purchase something through our Amazon recommended links.
00:00 - Intro
00:27 - Required Items
01:02 - Prep
01:20 - Air Filter
02:02 - Spark Plug
03:22 - Oil Change
05:00 - Check Oil Level
05:55 - How Much Oil To Use
06:42 - Final Check
07:06 - Disposing Old Oil
Internet #317061011
Model #RY803325
UPC Code #046396037886
Store SKU #1006435553

Хобби

Опубликовано:

27 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 65

@quinntalley1681 2 месяца назад

Thanks for your video. My 3300 psi Ryobi with a Honda motor takes 12-13.5 ounces of 10W-30. It has a much longer fill spout and dip stick (don't screw it in to test oil level!), so no issue getting oil on the wheel. A warm engine will drain oil much better than a cold engine, so I run mine for several minutes, with water and pressure washing hose attached, since the motor will only idle if it is not actually spraying. Then when I drain the oil I have to hold the motor at a couple different angles above the oil pan to get it to fully drain.

@thehousemann 2 месяца назад

Thanks for the info

@GIGATT73 Год назад

Nice video. Thanks

@thehousemann Год назад

You're welcome! Thanks for watching

@juliannieves962 Год назад

Nice!

@thehousemann Год назад

Perfect time to get it done and ready for next season!

@jokerhp1839 Год назад

what oil did you use? Nice video!

@thehousemann Год назад

Genuine Honda oil! You can get it on Amazon: amzn.to/3APCME4

@1divemaster1 11 месяцев назад

I was under the impression that you were never supposed to crank the engine without water being supplied to it to keep from burning the pump up by running it dry.

@thehousemann 11 месяцев назад

That's correct. Never for extended periods as the water acts as your cooling pump

@1divemaster1 11 месяцев назад

Ok thanks.

@erikestrada5725 2 месяца назад

Hey so no my ryobi 2900 pull handle got stuck and it won’t pull out all the way. I’ve attempted to fix this by watching your video I believe I over filled the amount of engine oil it needs. So I tilted the machine and allowed it to drip out excess. After a couple minutes things remain the same. Any ideas to what to check for? I’m mentally stressing myself out here thinking it could be worse when it may not

@thehousemann 2 месяца назад

By the pull handle. Do you mean the rope to crank? That shouldn't seize from improper oil change. That would be the rope housing getting seized. It's pretty straight forward process, you access the rope from the top (removing the housing) and checking to see that it didn't get jammed.

@NCLme 3 месяца назад

Question 🙋🏿‍♂️ hopefully you can answer this one picked up a roadside Ryobi with no Air filter box cover…can I buy replacement parts

@thehousemann 3 месяца назад

Shouldn't be hard to do. Just find your model number and type that + air filter cover into Google. Should pop up something. See several old units being parted out often on ebay

@ivanbg5167 9 месяцев назад

Don’t forget also replace the pump oil once every several years as well. It requires removal and disassembling the pump.

@thehousemann 9 месяцев назад

Interesting. I'll have to look into how to do this.

@ivanbg5167 9 месяцев назад

@@thehousemann ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-EE0P0_kxjNg.htmlsi=IM9tgr8U7FHu6xtg I would recommend using a quality pump oil instead of gear oil as this guy did.

@BlkSS4dr Год назад

Thanks buddy. I really wish they put a drain plug on it

@thehousemann Год назад

Same. That tilt to empty is just a mess

@raw_va 9 месяцев назад

Is the black piece on the bottom next to the pressure line an oil filter? Just used mine first time yesterday. Noticed it said first oil change is after 4 hours.

@Matt-lr8jq Год назад

Can you tell me why my brand new Ryobi 3300 psi 2.5 gpm machine is stalling on me? Just bought it today and it keeps stalling out on me. It has oil and gas

@thehousemann Год назад

Without more info. It'll be hard to tell. Could be a multitude of reasons. Old stake gas. Air in the fuel or water lines from improper purging..

@JohnnyRexville Год назад

I wonder if the 4cycle Ryobi Spark Plug works

@thehousemann Год назад

If they do. Let me know so I can update the description

@user-vs3yo5nu7n 2 месяца назад

Hi May i ask can we use CAR ENGINE OIL 10W30??? or it has to be honda pressure washer oil

@thehousemann 2 месяца назад

Yes that's fine. But not SAE 30

@user-vs3yo5nu7n 2 месяца назад

I am confuse, car engine oil are SAE , hihihihi thanks

@thehousemann 2 месяца назад

@@user-vs3yo5nu7n there's 10w30 and sae30. Use 10w30

@KarpioHugh 3 месяца назад

How after do you need to change the oil or after how many uses?

@thehousemann 3 месяца назад

Rule of thumb is to change it once a year. I do it before using it for the first time in the spring.

@KarpioHugh 3 месяца назад

@@thehousemann thank you for the rapid response

@thehousemann 3 месяца назад

@@KarpioHughof course! Let me know if you have any questions!

@kevinverble6416 Год назад

How about the gap on the spark plug?

@thehousemann Год назад

Gap - 0.024″- 0.028″ (0.6-0.7mm)

@steezybvnqz9198 11 месяцев назад

Hey bro so i have Ryobi Pressure Washer 3100 & was wondering, if the filter that you use for yours would work for mines as well?

@thehousemann 11 месяцев назад

From what I gathered quickly, it's the same. If you want you can provide the engine model number and I can run it by the air filter vendor to get a more accurate answer

@pietrosenerchia1786 2 месяца назад

Yes..

@bleo1017 Год назад

Can I do the oil change with gas still in the tank? Or do I need to have an empty gas tank?

@thehousemann Год назад

I see no issue with doing the change with gas in the tank. It should be a closed system.

@bleo1017 Год назад

@@thehousemann sweet. Thanks! Changed the filter, changed the spark plug, cleaned out the carburetor, and checked the unloaded valve, now to the oil change. Hopefully all these things will help with my washer turning off after 10 min of use.

@thehousemann Год назад

@@bleo1017 if your still having issues try using ethanol free gas. A little more expensive but it'll burn cleaner

@bleo1017 Год назад

@@thehousemann Cleaned out my Carb best I could. Didn't have wire for the slow jet so used what I could but I know didn't go down in there well, and I couldn't remove the screw from the main jet without striping it, in fact I may have a bit cause I can see some scratches on it now. So cleaned all the other parts out, put it back on, changed the filter, changed the oil, replaced the spark plug and still won't run when changing from choke to start. Would a new carb do the trick? I don't want to pour more $$ into this thing and wonder if I am just better of with a new powerwasher? I mean ethanol free gas would help it but this alone wouldn't be a solution would it?

@thehousemann Год назад

@@bleo1017 The carb is your next best bet. Thats the issue with 90% of gas powered engines not running properly. This is why i always try to run ethanol free gas. Also another thing I do everytime is let cut off the fuel supply and let the unit turn itself off by running dry. Both of these protect and maintain the carb from gumming up. Ive always had success turning the power washer back on after 1-2 pulls, even after coming back from winter break. It's hard to tell from your comment, but are you saying the pressure washer will start while in choke, but die when you switch it over to run?

@minusx31 Год назад

Mine seems to cut off if you use it too fast…gotta let it warm up first…is this normal?…

@thehousemann Год назад

Mine doesn't cut off. But I noticed mine doesn't like to pressurize properly until it's run for a bit. Make sure you are bleeding all the air out of the water line before cranking the unit.

@minusx31 Год назад

@@thehousemann Well that’s kinda what I mean…if I cut it on and try to use it right away then it will cut off…I have to let it run a little to kinda warm up or else it will cut off when I pull the trigger…

@thehousemann Год назад

@@minusx31 Yea. Mine won't cut off but it won't fully push out the full psi until it gets warmed up a bit. Almost like it cycles