No video :(

How to change rear suspension arm / rear control arm on VW GOLF 5 (1K1) [TUTORIAL AUTODOC]

autodoc.co.uk

Подписаться 395 тыс.

Просмотров 76 тыс.

50% 1

How to change rear suspension arm / rear control arm on VW GOLF 5 (1K1) 1.6 Hatchback 10.2003-02.2009 [TUTORIAL AUTODOC]
Suspension arm on AUDI A3 Hatchback (8P) (05.2003 - 08.2012) / SEAT Altea (5P, 5P1) (03.2004 - 2012) / SEAT Leon II Hatchback (1P, 1P1) (05.2005 - 12.2012) / SKODA Octavia II Hatchback (1Z3) (02.2004 - 06.2013) / VW Jetta Mk5 (1K2, 1KM) (08.2005 - 10.2010) cars should be replaced, as a rule, according to one and the same procedure.
However, there can be slight differences due to specific features of the vehicle design.
🔝 Top brands that produce suspension arm: RIDEX; STARK; FEBI BILSTEIN; LEMFÖRDER; MOOG.
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AutoDoc App - interstitials....
🛒 On our website you will find a wide range of auto parts you are interested in: www.autodoc.co...
Suspension arm: www.autodoc.co...
Suspension arm for VW GOLF 5: www.autodoc.co...
LIQUI MOLY Chain Spray: www.autodoc.co...
WD-40 Grease Spray: www.autodoc.co...
LIQUI MOLY Fast Cleaner: www.autodoc.co...
All video and pdf tutorials on VW GOLF 5 parts replacement: download and watch at AUTODOC CLUB - club.autodoc.c...
🔔 Subscribe to AUTODOC's channel and don't miss new videos on car parts replacement ➜ www.youtube.co...
🛠️The tools you need to replace rear suspension arm:
- wire brush
- WD-40 spray
- brake cleaner
- copper grease
- combination spanner No.18
- drive socket No.18
- wheel impact socket №17
- ratchet wrench
- torque wrench
- crow bar
- hydraulic transmission jack
- wheel chock
Was this video helpful? Give it a thumbs-up and share it with your friends!
Have a look at other videos on our channel:
► VW car repair tutorial - • VW car repair tutorial...
► VW GOLF 5 car repair tutorial - • VW GOLF 5 car repair t...
► How to replace wipers blades / window wipers VW GOLF 5 (1K1) - • How to change wipers b...
► How to replace rear brake pads / rear brake pad set on VW GOLF 5 (1K1) - • How to change rear bra...
Mobile Shop: m.autodoc.co.uk
📢 AUTODOC in social media:
Facebook: / autodoc.co.uk
Twitter: / autodoc_berlin
RU-vid: / autodocuk
Instagram: / autodoc_autoparts
#autodoc #autodoctutorial
Disclaimer:
This video is intended for informational purposes only and does not guarantee achievement of a specific result.
It is recommended that you entrust the installation to highly skilled technicians to ensure the best result.
This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements, that are a result of incorrect use or misinterpretation of the provided information. This video is for informational purposes only and does not guarantee achievement of a specific result. The user is personally liable for incorrect use of repair equipment, tools or car parts, in particular, when this use poses the risk of injury. AUTODOC strongly recommends being careful and adhering to the safety rules when doing any repair or replacement. Keep in mind that using low quality auto parts does not guarantee the proper level of road safety.
© 2019 AUTODOC GmbH All rights reserved

Опубликовано:

17 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 53

@dopiaza2006 4 года назад

Haha, 2:26 - you won't find a Mk5 Golf on the planet with original arms that doesn't have a seized bolt. And the bolt is seized into a rubber bush aluminium sleeve so it's a world of pain to get out, usually involving an air saw and a lot of swearing.

@169orgasmatron 3 года назад

Fighting with my Tiguan control arm right now. OMG. The damned bolt will NOT come out. Yeah, there's swearing...

@Champ54 3 года назад

I just pulled out the grinder today , problem solved....

@169orgasmatron 3 года назад

@@Champ54 I ended up doing the same. Then took it to a local shop who pushed in the new bushing for 20 bucks.

@Champ54 3 года назад

@@169orgasmatron bought each control arms with bushings for $25 on rockauto, Chek them out

@mazlamdauti5514 3 года назад

Go to FLORIDA, they have SHIT load of that pile of SHIT car.

@brysonhaagen3613 4 года назад

That's an interesting way of compressing springs.

@gairo75 3 года назад

Excellent tutorial guys, got all the info I need to carry out this job on my Audi A3, same platform pretty much so the job is the same from start to finish 👍🏻👍🏻👍🏻

@autodocuk 3 года назад

We are glad that you enjoy our work!

@dopiaza2006 2 года назад

How did you get on?

@Matt463634 5 лет назад

Blurred logo? Are VW that touchy about it being shown?

@maryo2620 10 месяцев назад

Hello. A superb and professional tutorial. All the videos I've watched, you even put the screw tightening values, which is very professional. I would like to find mechanics like you to fix my car. My question is: After changing the suspension arm, must the rear wheels be aligned? thank you

@autodocuk 10 месяцев назад

Thanks for your feedback! We are glad that you like our video. Yes, it is recommended to adjust the wheel alignment after this replacement.

@maryo2620 10 месяцев назад

@@autodocuk thank you

@matsobanemashapa7457 3 месяца назад

Why did you marked that washer

@mariomariano3098 3 года назад

I live in UK and I own an Passat 2008. B6 and guys almost every single bolt from rear suspension is sized due the corrosion. I never seen that bad even when I've changed the suspension to seat Leon 52 reg.. Horrible.

@matsobanemashapa7457 3 месяца назад

Why did you marked that washer

@autodocuk 3 месяца назад

In order to install it in the same position and after replacing the car could correctly drive to the stand under its own power and make an alignment adjustment

@onemodels2774 3 года назад

I just wanted to ask if you answer any questions? Thanks.

@autodocuk 3 года назад

Thank you for your comment! If you have any questions please feel free to contact our Customer Support team via the e-mail - info@autodoc.co.uk or filling the form here: www.autodoc.co.uk/services/contact Stay tuned with us! Best regards, Autodoc team!

@landofscots9994 3 года назад

I'm just replacing all rear bushes on my vw passat Rline so its easy just to replace new parts ie lower arms etc.....😊... But I'm upgrading all bushes & few bolts as it all original old parts its 10 years old..now 😎

@autodocuk 3 года назад

Thank you for your comment! Unfortunately, the complexity of car parts' replacement on each particular model of the car is individual and it all depends on the technical condition of the parts. Stay tuned with us! Best regards, Autodoc team!

@markkennedy9535 Год назад

Hi, what's the bush called on the hub end of wishbone please?

@autodocuk Год назад

This is the rear lower control arm bushing.

@Rusties844 5 месяцев назад

Is this the same process for a mrk 2 seat Leon 2012

@autodocuk 5 месяцев назад

In general, the replacement will be similar, the only thing may be slightly different is the design features of your car. More detailed information can be found in the technical documentation for repairing your car or visit the car service.

@Rusties844 5 месяцев назад

@@autodocuk thanks

@Chipchase780 3 года назад

Just had the rear suspension arms replaced on my Octavia combi. Should the springs be replaced too when this work is carried out ?

@autodocuk 3 года назад

It is not necessary to change the springs when replacing the levers. AUTODOC

@shaagealgareb9189 5 лет назад

Very very thank,s for this video

@ender8146 3 года назад

Hi, i have one question. Before one month i changed my rear suspension, and i noticed that the car is sitting too high in the back compared to the front. Same springs just changed the suspension. Any idea, any help how can i fix that? My car: Golf Mk5 2006!

@autodocuk 3 года назад

Unfortunately, we do not have such information, we recommend that you consult with a mechanic at the service. AUTODOC

@hollow34 2 года назад

All my springs are same height, but definitely will sit higher on new springs. Check they are seated correctly in to the arm.

@seven8478 Год назад

Camber?

@Alimohammed-ur4tp 5 лет назад

A creative friend of yours greeting

@vladpop88 3 года назад

The midle bushing is blocked for majority of the cars :(

@BananaM3thBread 2 года назад

Can you do this without a lift safety

@autodocuk 2 года назад

Hi! This work is recommended to be carried out only with the use of a lift.

@robbie2025 5 лет назад

Do a standard front sway bar replacement on a mk5 golf👍

@autodocuk 4 года назад

Thank you for your comment! We will make sure to take note of that for our new videos! Best Regards, Autodoc Team

@alexey9900 5 лет назад

Good 👍👍👍

@maximumextreme Год назад

Y u blurr vw logos

@richierich4175 4 года назад

It didn't show how to correct the camber of the wheels. If not correctly set, the tyres will wear unevenly.

@autodocuk 4 года назад

Thank you for your feedback! It is almost impossible to adjust the position of the wheels in a garage without a proper stand and to do this properly we highly recommend to use a professional car workshop. Stay home and stay tuned with us! Best regards, Autodoc team!

@hollow34 2 года назад

Voice over is REALLY annoying, please stop. I noticed you didn't change the bush in the wheel bearing housing. Is this something that you would recommend doing and how would you DIY this? thank you.

@robfay2478 3 месяца назад

Fozzy Stinks

@craiggibson3523 2 года назад

Pointless marking the washers the rear tracking was properly out b4 so need to adjust anyway

@hardcoreboom1878 3 месяца назад

Not really you get it as cl9se as you can then take it for 4 wheel alignment , your way is have it totally out so you have no tyres left when get there! Always mark!

@craiggibson3523 3 месяца назад

@@hardcoreboom1878 I’m gonna watch back something from 2 years ago but I’m aware of what to do I work as a mobile tyre fitter and know what needs to be done. They seize solid and had the job of replacing all this on a family member’s