How to Change Semi Truck Wheel Seals Step by Step | | Owner Operator Truck Repair DIY

Подписаться 78 тыс.

Просмотров 81 тыс.

50% 1

Welcome to our channel! In today's video, Ryan is showing his awesome viewers how to change semi truck wheel seal step by step. Make sure you watch the whole video to follow the instructions. It is not easy to make videos while doing the job. Please give his some support by leaving us a comment below and like the video. You can also subscribe to our channel for new useful videos. Ryan reads very single comment and question, he personally replys to each question. Thanks for your continuous support!
📢Exciting News:
Our online store is officially launched - Shop the largest collection of DPF, DOC, SCR & One Box at a price you will like!
► DPFDiscounter.com
Business Info:
Diesel Emissions Specialists offers expert diagnostics and repairs for diesel emissions aftertreatment systems. Rely on our skilled technicians for comprehensive solutions, including DPF cleaning, DOC, SCR, and One Box parts. Ensure your diesel engine runs efficiently with our top-tier services.
► www.emissionsp...
► Address: 1120 High Ave SW Canton, Ohio 44707
► Phone: 330-573-5396 (for business only)
► Email: info@fttfleet.com
Shop the largest DPF, DOC, SCR & One Box collection at a price you will like!
► dpfdiscounter....
Get the most advanced electric APU power by Lithium Starting Batteries for $5,500 today!
► www.polarfoxap...
Connect with us on Social Media Platforms:
► RU-vid: bit.ly/35YO3kN
► Instagram: bit.ly/3C7hRy6
► TikTok: bit.ly/3QxGHMT
► Facebook Page: bit.ly/2QqBuZ0
► Threads: bit.ly/3KmNp6P
► Trucking Facebook Group: bit.ly/34TbQXQ
My Favorite Products for trucking & truck repair needs from Amazon:
► amzn.to/3xZkDn3
Awesome Products and Services We Recommend:
► OTR performance diagnostic tool (super easy scan tool every trucker needs) - use promo code road3333 to get $100 off: bit.ly/3O3wshT
► Rock Rooster offers the best work boots for you. Use channel-exclusive promo code road3333 to get 12% off of your order today. bit.ly/3HFLFDu
Want to work with our channel? Email us for more details
truckingandfixingwithryan@gmail.com
-----Disclaimer-----
The information and instructions provided by Trucking & Fixing with Ryan RU-vid channel is for general informational purposes only. All information on the channel is provided in good faith, however, we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability, or completeness of any information on this channel. Some product links are affiliate links which means if you buy something we'll receive a small commission.

Опубликовано:

8 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 122

@johnarmstrong9634 4 года назад

Great video very informative for a new O/O driver like myself trying to save money

@showtimespeedshop 2 года назад

This helped me do my first one today. Thank you Ryan.

@truckingandfixing 2 года назад

You are welcome!

@djdebler2187 Год назад

I’m doing mine but. How much oil do I put in and were.

@Coronado-nz7wu Месяц назад

@@djdebler2187 32oz usually does it. Check your rear end level after driving for a while. How'd it go?

@sophiasocal68 Год назад

I like to pack my wheel bearings with red high performance grease when re-assembling the assembly. Sometimes the oil doesn’t get up on the top 1/2 of the bearings right away so packing them adds an extra level of protection during the initial drive period after installation. I think it helps extend bearing life since it has good lubrication.

@sophiasocal68 Год назад

@@sidthesloth128 I've been doing both for close to 20 years, haven't had a bearing fail yet.

@wreckingcrew5172 2 года назад

Now I have to give credit where credit is due. I don’t know if anyone else picked up on the fact that you felt 100lbs of torque. And realized you didn’t set your wrench. But we’re dead on when you did. Love it my man god bless you in your business. I hope to have you look at my trucks in the near future. Where are you based out of.

@rogerbartels5223 2 года назад

Put High Temperature Wheel Bearing Grease on your Gaskets. It works very well and the Gasket comes off much more easily the next time that you disassemble the parts.

@MymaJyma 2 года назад

For the seals that are really stuck you can throw the hub in the drum to help hold the hub in place.

@krisbarnes1223 2 года назад

Sweet, I just got my CDL and truck last week. Ran 2 loads and noticed a wheel seal leak. Looks like I'll be getting some new tools. Thanks for the video.

@terryj-londonontariocanada4605 4 года назад

Smart to change them out when doing all your brakes.

@truckingandfixing 4 года назад

Yes, the seals are only an extra $35 each, and takes an extra 20 minutes to swap them out while the brake hardware is off, so its a no-brainer to me. The last wheel seal I had to get replaced on the road, out at the TA in Ontario, California, cost me over $500, for one wheel!

@scottjansen3569 7 месяцев назад

I have a 2014 F53 chassis motorhome with 22.5 tires. I'm learning alot watching your videos. Than you

@teddyrivas1082 3 года назад

I like your style attention to detail, most people don't take the time to explain the right way to do things like you do! Your a great teacher, if I ever decide to get a truck, will you help me if I run into a situation?

@teddyrivas1082 3 года назад

Appreciate your teachings, God Bless you on your jernouys ! Godspeed!

@andyg817 Год назад

We got a 7.5 tonne iveco, the seal had gone, i put gentle pressure on the bearing with the Press, the other side, pushed out easy peasy... The hub nut locates on the washer holes, , tapered bearing.. Good video 😊

@shalomatemkeng3660 7 месяцев назад

I am a new apprentice on practicom I learn a lot from your videos

@truckingandfixing 7 месяцев назад

Good to hear! Good luck 👍

@dgronzega8073 2 года назад

Well done. 👍👏 He had invested in the proper tools to do the job, pay for themselves. 😎💪

@HumbleT354 5 месяцев назад

Going to check mine this week.. video was helpful and straightforward.. 🙏🏾🙏🏾

@user-rs1990 29 дней назад

9:46 - That part on the hub is commonly called a 'Tone Ring'.

@jasonclow3448 3 года назад

Good stuff. Always learn from your videos. Thank you Sir.

@Alex-ri7xr 4 месяца назад

Thought you were gonna use the 2x4 to hit the seal from the other in to make it come out . I’ve done it that way too .

@TATEXPRESSINC 4 года назад

Awesome Video!🎥

@dannyscott4093 4 года назад

That's for taking the time to show us good job

@truckingandfixing 4 года назад

Thanks for the comment!

@yafeifox8865 4 года назад

very detailed steps.

@Madanchhetri12 Месяц назад

Clear view vedio to change

@hd93scooter 4 года назад

Excellent how to!!! Good job!!👍✌️

@juanpabloricolopez4285 2 года назад

Very profesional and clear view and very well explain step by step

@truckingandfixing 2 года назад

Thank you! 😀

@garystocks8593 2 месяца назад

Thank you Rayan

@d.j.robinson9424 2 года назад

So you don't need to add any oil to the hub port ??

@user-lf7en6rf8m Год назад

Excellent thank you, im getting involved in this type of work, love fixing things, subscribed 😊

@truckingandfixing Год назад

Thanks!

@robertesposito9871 3 года назад

That sleeve your talking about is that the spacer some of the newer trucks have

@coreygreenidge6271 2 года назад

This channel always helps me. Thankyou

@truckingandfixing 2 года назад

I am glad to hear that! 👍

@erikresendiz8601 11 месяцев назад

How much do you torque the last nuts with the gasket

@Imbrokeaintgotit 4 года назад

I wish I was cool like you

@truckingandfixing 4 года назад

Haha! Thanks for the comment!

@Sophia-yp2qj 4 года назад

always enjoy watching your videos. keep more coming.

@ogbuagusinclair7310 3 года назад

Thanks man you doing good job

@goranbozic3075 2 года назад

Great video, you explain very good. Thank you 😊👍

@andrewharris6225 Год назад

Awesome helped alot

@truckingandfixing Год назад

Good to hear! 😊

@metalicharsha Год назад

very good video.. Thanks man

@truckingandfixing Год назад

You are welcome!

@user-sz3iq4po5t 4 года назад

good video, thanks for the hard work.

@dustingamboa5494 Месяц назад

Do you work on other people's truck? You need to open your own shop. You're pretty good at what you do.

@dano1g Год назад

Awesome video, thank you for taking the time to make it.

@nickfehrenbach382 2 года назад

Hoping you actually have at least one jack stand under that chassis that I just can't see. Always better to be extra safe than sorry if that hydraulic jack fails or if the truck somehow shifts itself off of the jack at any point. Love your knowledge your sharing and love the great content you put out. Just dont want to see an avoidable accident happen and you getting yourself hurt

@tylerhall6455 2 года назад

Thanks man. Great vid!

@truckingandfixing 2 года назад

Thank you!

@dwaynemcfall3187 Год назад

Wondering why you didn’t grease the bearings, very meticulous on the foot pounds, really like your electric torque wrench…….

@localfreight4222 10 месяцев назад

Hi, good morning, I’m opening a shop here in Vegas ,can u please tell me what are the most brake shoes I should keep on stock

@winstonspratt5556 2 года назад

Excellent presentation....Great job.

@meatman3042 4 года назад

Good stuff

@truckingandfixing 4 года назад

@carwynjones731 2 года назад

Really enjoyed yr vid .great explanation.

@teddyrivas1082 3 года назад

It seems so easy when you do it. Cool

@class8garage308 3 года назад

proper steps need be followed never put lube on the lip of seal with the scottseal classic install dry, hammder in with special tool untill seated must be done straight

@fathieljali2058 2 года назад

Good job

@tubeup 2 года назад

Do you think a 3 ton jack is good enough to lift the axle for a 2012 Volvo VNL ? So i can remove the tires etc

@gasperajdnik8004 Год назад

Good work 👍

@epiphanio4430 Год назад

Is a good video nex time put some stand jacks for safety is first. Thanks

@class8garage308 3 года назад

Most items yes I agree when your in there replace it if not much cost but wheel seals are different If not leaking and all rusted lips on the metal leave it alone, you will have more of a chance it leak when you install on truck if u just nick it slightly, plus creates a big job that should have been easy job, One exception for techs that are old enough is cast spoke wheels , ask your viewers why??

@craigjames6504 3 года назад

Thanks for the detailed vid. You didn't put any oil back in?

@truckingandfixing 3 года назад

My seals were not leaking when I changed them out, the reason of changing them was that I already have them apart, It made sense to change them, in case of leaking while I am on the road. After changin the seal, I checked the oil level, it was full.

@wreckingcrew5172 2 года назад

Every how often do you recommend doing them.

@oglaredo9565 4 года назад

Gang here learning the game

@raynellbright7097 Год назад

I’m going through the comments looking for the amount of torque goes to the Axle???

@class8garage308 3 года назад

Please tell your viewers not all seals are equal when removing hub you best check spindle to be sure there is no "Wedding Band left on there" that will need to be removed by hammer and chisel depending on what seal was used prior, and as far as install depends on seal your using CR SCOTTSEAL CLASSIC will require special tools and Never use oil on lip seal itself with those. totally different install steps with those and they are most common lets say a cr 47697

@localfreight4222 2 года назад

Do u think is possible to put a semi tire out with a 9 gallon gas power air compressor

@ikstrucking3289 2 года назад

What is the average life expectancy for the hub bearings? On average, about what mileage to expect from them? I haul most loads pretty light, nothing dramatic Anyone who can answer, thank you, and blessings!

@MymaJyma 2 года назад

I've always heard 300k-500k if installed and cleaned properly.

@ShainAndrews Год назад

If they are adjusted properly, lubricated properly, and sealed properly. Long time. Upwards of 1M miles. Tapered bearings are one of the most robust bearing systems in existence.

@allenwojtasik4843 2 года назад

I think my wheel seal bearing is going out on my driver side drive axles (front or the back) can’t tell if the sound is coming from the front axle or the back one.. only makes the humming/whining sound when I’m loaded can barely faintly hear it when empty also nothing is leaking.. or could this also be my differential going out? Thanks for your insight

@truckingandfixing 2 года назад

did you check the oil in the differential?

@davidaltrogge Год назад

How do you put the oil back in the hub????

@FaithWRanch 2 месяца назад

Why wouldn't you replace the bearings while you have it apart?

@ratnow7 Месяц назад

The bearings on these trucks almost never go bad usually if they go bad it's cost of rear end going down or contaminants in the oil or not changing the oil

@seanharris2081 Год назад

That thicker part of the spindle is where the seal sits… not the bearing

@alptugakkus3120 Год назад

I did not see that you put fresh oil in it ?

@neenoonoo2564 2 года назад

How longe you can keep driving until change it when you recognize it it's leaking oil ?

@picasso2445 2 года назад

Until you loose brakes or get put in out of service

@richmiller4626 4 года назад

Good video-excellent camera work!

@truckingandfixing 4 года назад

Thanks!

@mikeschmidt3810 4 года назад

What are your thoughts on the 6x2 axle configuration?

@truckingandfixing 4 года назад

The 6x2 would be great for a Line haul operation where you are on the same predictable routes. It will reduce weight. Giving you a little more load capacity, and in some cases you can raise that dead axle to save on tire wear when its not needed. If you are running over the mountains, in snow, or off road anywhere it would probably not be recommended, that's probably why the 6x4 is more industry standard.

@mikeschmidt3810 4 года назад

@@truckingandfixing What about gear ratio? I had a dealer tell me that a 3.08 with OD offered the same performance characteristics and mpg as a 2.47 Direct drive.

@truckingandfixing 4 года назад

For the lanes that I run (over the Rockies, Cascades, and Sierras), I prefer a little lower gear ratio. My T680 had 3.36 with a 13 speed(manual) and my T660 now has 3.42 with a 10 speed(manual). I do sacrifice some fuel economy, but I can move pretty easily over the big grades without running my engine too hard. The higher ratios you described are great for economy. I am averaging about 6mpg with my T660 now, with a Cummins ISX 15, about about 550hp, and that's running as fast as speed limits will allow. I may put a 13 speed in this summer to improve that a little.

@fannyngangi9178 2 года назад

Hi Ryan can you fix my truck wheels seal same like you truck…. I have 2007 kenworth t2000

@truckingandfixing 2 года назад

Please give Ryan a call to make an appointment. +1 (330) 573-5396

@user-mk4fh4vo2n 9 месяцев назад

换这个油封在修理厂需要多少钱

@Mr.ForceRipe 2 года назад

I tought him that

@truckingandfixing 2 года назад

🤔

@truckincapinwith15romeo10 2 года назад

Not to sound wasteful but if your already doing all this work why not replace the bearings as well? Unless the bearings are like a $500 part then I understand

@isaiahdaily5574 10 месяцев назад

Man I wished I worked with people like you, I got a guy from Cuba, no English, 3 from Venezuela, no English, and two from Mexico with some English but all of them have a mechanic mentality better than I’ve ever seen it’s just they don’t know the difference between “proper” and “eh, good enough”, if it drives it works, they forget the details and safety measures, I understand in their countries they had little to work with but dot doesn’t give a shit and these drivers and others lives are on the line with jobs like replacing brake shoes, king pins, wheel seals, etc. I almost had a truck fall in the shop do to improper jack placement, it’s ridiculous and I really wish I was a part of a solid crew or I could just go off on my own, but I don’t have enough resources and knowledge to go completely independent

@gasparini76 3 года назад

Where did you learn this procedure? Please

@ikstrucking3289 2 года назад

Sounds like a snitch lawyer?

@teddyrivas1082 3 года назад

How much would tjey cost if you needed to purchase them for?

@class8garage308 3 года назад

seals run around 40 bucks 37 bucks for scottseal classic

@teddyrivas1082 3 года назад

What is that tool called?

@class8garage308 3 года назад

get if from cr scottseal seal installer each end is extra depnds on your seal application fleetpride has them among else

@followtheroad9144 Год назад

I have a problem with my truck please check this vídeo

@joeysok2366 4 года назад

Will you help change mine too? And how much you charge for it?

@truckingandfixing 4 года назад

Hi, where are you located at? I really would rather not commit to any additional work right now unfortunately, I am pretty well at 110% right now with being on the road, and spring farm work starting. I may be able to help walk you through it though. Thanks for the question.

@Rayden440 Год назад

I'm not trying to stop anyone from DIYing, but please read the manufacturer's instruction, this is not something you should attempt after tossing out the instruction papers. Your hub may be different from what is shown in the video. If you mess up real bad, you're lucky if you prematurely wear out the bearing or seal, if you're unlucky you lose both your wheels and it kills someone on the road and you're looking at manslaughter charges.

@justinmason4399 3 месяца назад

This is the most dramatic post iv ever read.

@SarbjitSingh-oe6eb 3 месяца назад

Man you crazy and you have no clue what you talking about.

@petejohnson8397 Месяц назад

@@justinmason4399it is a smart post. So called pro shop screwed my stuff up. Then I learned what axle surgeons are. The shop that did the work was lucky they weren't sued by someone that got smashed by my wheel end. From now on NOBODY touches my wheel bearings but ME