How to Change the Air Filter on a Honda TRX350 Rancher | Partzilla.com 

Man you made installing that air filter into the inner frame look like a cake walk. Expletive words and grunting included

Putting the air filter on that filter support/body was way harder than I expected! It took me a half hour to get the filter over that second lip on the body! Especially after spraying that pj1 foam filter oil on it. The best way to explain how tough it was to get the filter over the last lip on the filter body is just imagine trying to put a condom on a greased watermelon. I ended up using a shoehorn to slip the filter over the body.

Thanks for this video. I got a mix air filter and I tell you what it took every ounce of strength and the right placement of tools to get that rubber over the filter. Do other filters have more clearance?

I can’t get the filter over that edge thing

Today i learned something!

Engine illiterate here. Went to change the air filter, your video helped immensely, but whoever had my used Rancher before me must have chucked the inner frame. Want to replace it but not even sure what to call it. Have been looking at Partzilla but no luck yet. P.s. 2006 Honda Rancher trx350.

is there any aftermarket airfilter? for preformance?

2000 rancher 350. Starts cold, but dies when warmed and won't restart. Just found a button that looks like a choke on side of filter that appears to be a primer, and pushed 3 times. Started then turned off. Is there a small filter inside plastic 90 on fuel inlet side?

Does the metal air filter part go in the black part or does the filter go over the black part. Thanks

John is there any type of screen part. That goes on the end of a stock snorkel on a 2019 Honda 420 Rancha. I'm just trying to prevent mice from crawling through and making a nest in air box. I think something like that should be installed in the factory.

do you have to spray the filter?

Thank you

I can never understand why people don't take 2 extra minutes to clean the outside of the parts they are putting back on a machine, i.e. the dirty airbox cover and leaves under the seat in this particular case. He poured a bit of sand into the airbox when he removed it.

Will it hurt the atvs engine by taking out the air frame (the metal peice underneath the air filter) an running?

We bought this model unit from a friend. The filter frame did not come on the unit. When we place the cover over the free box, the unit turns off. Is it due to the filter frame, or lack of?

Hey so the metal thing inside the filter won’t come of even tho I unscrewed it it’s just stuck what do I do

What do I doo if I have any oil in my air box

Does the filter element male end supposed to slide inside the Carb intake tube or over. I bought a brand new filter and element. The male end of the element is the same size as the intake tube on the Carburetor. Did I buy correct part for the connection

Why would my air box have oil sitting in the bottom of it?2001 Honda rancher 350

How much oil you put on thoses filters? Only one layer?

how in the hell do i get my filter to slip on the last part, just cut my finger struggling to get the. mf on their and it still wont get on

How about that little small foam peace what's it for

Would it be the same process on a 2000 honda foreman 400fwd

Здравствуйте а как поменять топливный фильтр квадроцикла

Partzilla can you give me a link to the rubber that goes in the top😃 the one you said make sure is there

Honda filter is pre oiled.

Solo se puede colocar ese aceite, o se puede colocar cualquiera?

qual folga de válvula de admissão e escape Fourtrax 350?

You would think he would clean all the parts like inside the air filter

Your a fraud pal, you cut away at the hardest part