Change the bedroom lighting from Sample Image to Vivian.
Change the lighting of Sample Image to Vivian
Change the sample lighting to back and forth
Change the sample key to the key of Vivian
Changing the lighting of Sample to Vivian and Briza
Connect key and breeze
Vivian key plug
First let's see the old installation.
As for the old installation, the sample switch gave simple lighting, and there is also a socket or breeze at the farthest point of the bedroom, i.e. close to the head of the sleeper.
Simple ignition switch connection method:
Delivery method:
We take the phase or the phase from the differential breaker and connect it to the single-phase breaker, then we take out a red wire and connect it directly to the switch, and we take out a yellow wire from the switch called the return or rotor and connect it with the lamp. As for the neutral or neutral, we take it directly from the differential breaker to the lamp. When we press the switch It closes and passes the phase to the lamp and it lights up. If you press again on the lamp, it opens and cuts off the current to the lamp and turns it off.
How to connect the socket or bridge:
We take two wires from a cable cutter, one phase and the other a neutral or neutral, and we pass them directly to the socket.
Now we see how to change the syntax from Sample to Vivian:
For this change, we need to replace the old socket wrench and Breeze, and replace the sample wrench with Vivian's wrench.
Here is the delivery method:
For the breeze, we take the new socket, which also has a key. We connect the notre in the first hole of the breeze, then the winch in the remaining hole, and we also connect it with the hole in the middle in the back and forth or Vivian key. Then we take out two wires from the two remaining holes in the Vivian key and connect them with the second Vivian key so that we tie them in The two lateral holes and we get out with a wire from the middle and connect it with the lamp, and the chord was connected with the lamp before, so when we press the Vivian key the lamp ignites and then we go to the second key if you press it separates the current from the lamp and turns off and this is called va et vient lighting.
How to install Sarot Vivian
Simple ignition switch installation
Vivian key installation
How to turn on a pvivian lamp
Back and forth lighting
Montage simple collage
Montage va et vient
Domestic electrical education
Architectural electricity education
Electricity education, industrial and architectural maintenance
18 апр 2023