Thanks Tino - I just replaced a screen using your video - very good tutorial. For anyone else replacing a screen, make sure you don't mix up the various small black screws - some are different lengths and you will damage the backplate if you put the wrong one in the wrong place. When you put your new screen in, the main screen connector was hard to insert and I thought the screen was not working. The connector was just not in far ennough - it takes a little effort. I used some hot glue to re-attach the tape for the connector as the adhesive was left on the old screen. When you are attaching the screen to the backplate, be careful to slide it all the way down (this is not as easy as it looks) or the screws will not go back in easily. I had to loosen the screws on the right-hand hinge and work that side of the screen down until it was fitting correctly. I also had two additional screws which attach the very outer edge of the bezel to the backplate (to the outside of both the hinges). So if you have two tiny black screws left (like I did!) then this is probably where they are from. Best of luck.
Thanks.. great details and I appreciate the good angles so we can see what you are doing.. Tips are good, also. My replacement required that I peel off the old screen from its' plastic frame and it was a little longer on the bottom, but it all worked out okay.. little cable finagling when putting the final little plastic thing back on, but it is up and running now. Thanks again!
I ordered the LCD and didn't realize it didn't include the digitizer screen and bezel, which are normally glued together. What is that assembly called, and is epoxy OK to glue it together? Any purchasing tips for that assembly, or vendors? It appears you don't endorse vendors.
Thank you so much for the helpful video I just have 1 question, I replaced the screen all the way to the end successfully but I am not able to put that little plastic back, please help
Hi Studentenfleib90, make sure that you use the little motherboard that came with the screen to make the touch screen work, don't put the original from the yoga .
I have one ( Lenovo Yoga 2 Pro) with faulty motherboard . Can i use / convert display to portable display ?? Which controller suitable for the display ?
i like the screw driver you are using. what is the brand? also, this unit should be a touch screen, have you replaced a non-touch screen LCD in a unit that was supposed to have touch?
Hi Great video. I changed the screen and put together perfectly. But I just took it apart again to change the screen back lid and I think I have screwed through a wire cause the screen won’t work. Laptop on but screen is off? Is it easy to fit a new wire or mend it?
I just watched your video and was wondering if your touchscreen still work after you repaired it? I'm trying to fix mines also and this was a great demonstration!
Hi Cathy, of course work, but for some reason in this repair, I had to restart the computer, because on the beginning did't detect the touch, but after I restart it work 100%
Hi, I have an X1 Yoga with a cracked top right of the screen. The screen looks fine and the pen still works, but finger touch does not. Do you know if I can replace just the "touch" component or have to replace the whole LCD unit?
Hello, could you tell me how can i replace the cable that connects screen to the mother board ? I broke it so i bought a new one, but i cant seem to make the cable go through the grey round thingy... Thanks for your help
+Regine Fils-aime on amazon or ebay www.amazon.com/Lenovo-Ideapad-Digitizer-Assembly-90400232/dp/B00R3WA07Q/ref=sr_1_1?ie=UTF8&qid=1453357453&sr=8-1&keywords=yoga+2+lcd
Hi Tino, may yoga 14 screen is not folding flat to the back for the tablet mode. There is a small issue with the right hinge like thing that connects key pad and screen. Is there a way to fix it?
My Lenovo yoga 11s display needs to be replaced. Who manufactures display units for Lenovo ? Is it their own brand? Are there other brands that would work for replacement? What model screen should I buy ? I live in India.
Hello, I have a Lenovo 710 15ISK laptop and I need help with my laptop. I had fallen out the stairs and on the top right side is some white fuzz when in black it's shown. In white I can't tell it's their. I need help please. My mom would kill me if she sees this. And also. The screen shifted to the left a bit when I fell. Thanks
I am from India, I have Lenovo yoga 2 360, 20344, screen got damaged totally, but couldn't find screen in local shops, can you please recommend some websites from where I can purchase
Yes Rejan, i love amazon . www.amazon.com/LCDOLED®-Screen-Display-Digitizer-IdeaPad/dp/B00VW8ZPN6/ref=sr_1_2?ie=UTF8&qid=1478149938&sr=8-2&keywords=yoga+2+lcd
Does anyone else realize that his touchscreen function still doesn’t work with the new screen Everytime he tries the touchscreen nothing happens then he cuts to a new scene Be careful with this guy, the crack is gone but then he says everything is working except he doesn’t inform you the touchscreen doesn’t work