How to change the seal and size of the front shock oil for the Honda Kharisma, Supra X125 motorcycle.
The first step we take is:
1. Loosen the two L 6 bolts under the front shock.
2. Open the four bolts 14 as the shock lock in the triangle.
3. Open the clip ring cover, press it using a screwdriver while pulling the ring clip, looking for the connection to make it easier. And also open the locking area which is large as a retainer for the shock seal.
4. Open the shock seal using a tire plug or screwdriver and cover the tube with a cloth so it doesn't come off.
And for the installation is as follows:
1. attach the seal and use a used klakher on it then we press.
2. Install the large clip retaining the shock seal and the rubber tube cover.
3. Pair the front shock oil with a size of 65 ml or 68 ml.
the more oil we pour into the front shick tube, the harder the shock will be and vice versa.
4. Pair the front shock spring which is tight at the bottom and loose at the top. And attach the front shock cover by pressing it using a screwdriver and attaching the locking clip.
Thank you so much to all #SUBSCRIBER#
and the audience wherever you are, hopefully the knowledge is useful.
please #subscribe#
@IBOT MOTOR CHANNEL .
If you have questions, you can write them in the comments.
Tel/WA: 085863491419.
Thank you very much.
1 апр 2021
