How to change wheel bearings on a dirt bike

Подписаться 34 тыс.

Просмотров 45 тыс.

50% 1

If you never had the experience of changing the bearings of the wheels of a dirt bike, this is your opportunity! In this video, I'll show you exactly how to do it, step by step!
Learn the basic mechanics behind it, so you can make sure everything goes as expected and nothing is damaged.
No new bearing was hurt during this shooting :D
Follow the S2P channels to keep updated on all the videos and news!
Steps to Podium Facebook: / stepstopodium
Steps to Podium Instagram: / stepstopodium
Cheers!
#HowTo #StepsToPodium #WheelBearing

Спорт

Опубликовано:

6 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 93

@andytyannabrandon 2 месяца назад

This is the only video that worked! Great explanation with the logics behind it. Thank you

@ericrobitaille6867 2 года назад

If you don't have a 32mm socket to tap the new bearing back in with (i.e. you're doing this on the trail), use the old bearing. Needless to say, it lines up perfectly!

@StepstoPodium 2 года назад

Good idea!! Thanks for the input 😉💪

@skyblockjake Год назад

I wish I could get awards to RU-vid comments. Thanks!!!

@goldmx1229 3 года назад

Man.... Im in Motocross Racing since 1989 Im not much a mechanic guy, Last time I did myself was like 16 years ago, I knew it was very easy but once I started I was like “Man...” started looking for video and all of them were putting fire till I found your video!! Wow man, You really Rock! I did it like in 10 seconds. 💪🏻💪🏻 your video should be on Top.

@StepstoPodium 3 года назад

I'm glad I could help!! 💪😊

@DailyDose2Inspire 3 года назад

Best tutorial i've seen on here. Well done, sir!

@StepstoPodium 3 года назад

thank you so much! 😊💪

@Signature_move 3 года назад

@@StepstoPodium are the bearings the same size for all dirt bikes

@StepstoPodium 3 года назад

@Hassaan Zaheer no, they are not! It depends a lot on the manufacturer

@rfcmaverick739 6 месяцев назад

Very good explanation. Do not do big ass whacks when running out of patience.. exactly how he did it do it.. hard ones add heat to the side the bearing is coming out.. little taps in and out.. no whack a moles ..When busting out the the spray at the end saying don’t forget.. totally at first thought cleaning tools when done😉.

@roller121984 4 месяца назад

Great video!

@mikeopenshaw9128 2 года назад

Superb video - I was really struggling until I watched this - thank you for sharing! 👍😃

@StepstoPodium 2 года назад

No problem, I'm glad I could help! 😄💪

@brandonboutin3975 3 года назад

Very informative sir, thank you!

@StepstoPodium 3 года назад

Thank you for watching! 🙌

@Kohanuitohu Год назад

you are very clear and make it easy to understand thanks

@StepstoPodium Год назад

Welcome! 👌

@ronaugelli2201 Год назад

Excellent !!!!

@paulocosta931 5 лет назад

Nice one! Well done!loved the 3d animation

@StepstoPodium 5 лет назад

thank you so much! I really appreciate that, it gave me a hell of a work but I think it paid off :)

@JoaoSilva-gs5jb 3 года назад

este mestre nunca falha! excelente vídeo!

@StepstoPodium 3 года назад

Só sou mestre porque tirei mestrado, de resto sou igual ao próximo! 😆 muito obrigado João! 🙌💪💪

@angelotripodi5560 3 года назад

thanks this will help me soo much because this is my first time replacing my bearings

@StepstoPodium 3 года назад

Glad I could help! 🙌💪

@gregmougkrakis608 4 года назад

Very helpful. Keep sharing your tips on gas gas.

@StepstoPodium 4 года назад

sure will 😉

@Nisotovski 3 года назад

Nice video! Thanks :)

@StepstoPodium 3 года назад

thank you for watching! 😊

@tiagosrb 5 лет назад

Muito bem explicado! Congratulations

@StepstoPodium 5 лет назад

Muito obrigado Tiago! :)

@trevorhuntsman4272 2 года назад

Thank you tried your way, worked no problem

@StepstoPodium 2 года назад

Thank you :)

@jamiletgarcia6896 Год назад

You rock bro! You saved me

@StepstoPodium Год назад

Glad I could help! 😄

@joselouro3513 7 месяцев назад

Excelente vídeo :)

@StepstoPodium 7 месяцев назад

Obrigado José 🙂

@andrewscullion5766 4 года назад

Help me a lot thanks

@StepstoPodium 4 года назад

I'm glad I could help! 😊

@beaufreestone4614 Год назад

Awesome 👍💯

@StepstoPodium Год назад

🙌🙌

@micklee1446 3 года назад

Very good

@StepstoPodium 3 года назад

Thank you!!

@erikmc6385 2 года назад

Awesome

@maximinosantos9938 3 года назад

Boa dica 🇵🇹👌

@nizammohamed102 3 года назад

Thank u

@Minjoeman Год назад

Very good video! I like your technique to remove the bearing without a bearing pulling kit. As I have never done this the one question, I have is how to align the center spacer. I saw you just dropped it in there and seated the last bearing. Is it just floating in there and when you put the axel through everything aligns and then you tighten down it compresses and holds everything aligned? Can you explain this part?

@StepstoPodium Год назад

Yes, that's it! It can also depend on the bike. The GasGas (from the video) was like that. My current bike, a Beta, does the alignement of the bushing through the outside bushings (the ones sitting between the bearing and the swingarm)

@PurpleShadowDragon 2 года назад

what socket and ratchet set do you use?

@mathnmotorider2229 2 года назад

How often should we have to Greege our bearing?

@MrNz96 3 года назад

Hey man, my bushing in the middle of the wheel is moving up and down, and I can move it with my finger, do my bushing or bearing need replacement?

@StepstoPodium 3 года назад

it might depend on the bike but the as long as the bushing is "stuck" between both bearings, between the smaller diameter tracks, all good! if after replacing the bearings you can still easily move the bushing up and down, it might be worn or you should check the user manual to see if there are no other components missing perhaps (it's a pure guess )

@brunocarvalho9883 5 лет назад

Top, boa ideia esse vídeo.. venha o próximo. Como colocar a roda devidamente para não deixar a suspensão em esforço. 😁 😉👌😁

@StepstoPodium 5 лет назад

Obrigado! tbm é uma boa ideia! 😊😆

@tonyhenriques1976 5 лет назад

Bom vídeo. Mas não tem por hábito retirar a blindagem dos rolamentos, para adicionar mais massa???

@StepstoPodium 5 лет назад

@@tonyhenriques1976 Este vídeo só aborda a substituição dos rolamentos e não a manutenção, mas depende dos rolamentos. Neste caso comprei uns SKF 6004 selados, por isso não é uma boa ideia abrir o rolamentos, mesmo que seja para por massa consistente nova. Quando são selados, tem uma massa especial que permite funcionarem melhor. abrindo esse selo, perde-se a vantagem de comprar esse tipo de rolamentos!

@tonyhenriques1976 5 лет назад

@@StepstoPodium Ok obrigado pela atenção. Eu acrescento sempre massa e vedantes novos, julgo que aumenta a longevidade dos rolamentos, por norma fazem cerca de 80h. Mas na próxima vou experimentar esse tipo de rolamentos. Vou continuar a acompanhar o seu canal, bom trabalho e boas voltas. Se passar por Arganil - Coimbra, está convidado para uma volta, ou como se diz pela zona "uma esgueiradela pelo matoso" 😀😀😀👌👌👌💪💪💪

@StepstoPodium 5 лет назад

@@tonyhenriques1976 eheh obrigado! Se passar por ai, digo alguma coisa de certeza! Se passar aqui pelo Porto, não hesite em avisar também! :)

@nitro_main8444 3 года назад

is there usually a spesific side the bearing has to be installed?

@StepstoPodium 3 года назад

Usually no! 😊

@reelue2676 3 года назад

i have a after market rear rim and it has 4 bearings, is this normal?

@StepstoPodium 3 года назад

It can have, yes! The more bearings you have, the less load you'll have on each bearing

@poojr1828 3 года назад

You made it look tooo easy

@StepstoPodium 3 года назад

Trust me, when you do it right, it's easy! 👌😊

@MrJeffharper47 Год назад

I feel like a bearing remover tool would be a much better way to ensure you don’t damage the hub?

@StepstoPodium Год назад

It's always quicker and safer, but ifcyou do it properly, there's no problem 💪

@MrJeffharper47 Год назад

@@StepstoPodium sick. I’m doing mine this weekend and ordered a bearing removal kit because I didn’t think there was another way to do it lol. I’ll keep it.. it’ll be useful on the next rebuild.

@tilenkobe Год назад

So I forgot to grease the hub where bearing sits before putting it in... Should I be worried about that?

@StepstoPodium Год назад

If you replace the bearings on time, it shouldnt be, but if you leave them be for longer than they should be, it will bd tricky to take out!

@carlosdionisio5227 5 лет назад

Nao te esqueças spray de limpeza travoes no disco para massa que os dedos deixam 😁

@StepstoPodium 5 лет назад

Se não tocares com os dedos no disco não precisas 😂

@raminarshadian3209 11 месяцев назад

Hello, dear friend. I put one bearing completely inside the seat, but the original spacer is about 0.5 mm bigger and the second bearing does not fit completely inside the seat. Does this not cause a problem? If I hit the second bearing more, they become completely stiff and it is no longer possible to rotate the bearings with a finger. Thanks.

@StepstoPodium 10 месяцев назад

If that's the case, then it's a problem. The bearing should rotate freely

@raminarshadian3209 10 месяцев назад

@@StepstoPodium Thank you for your response. Sincerely

@mathnmotorider2229 2 года назад

Please tell me the size of bearing that you changed?

@StepstoPodium 2 года назад

I have no idea 😅

@MrDanisify 23 дня назад

Boas, porque é que metes massa no retentor e não metes logo um novo? o velho vem sempre duro e com massa então ainda fica pior. cumprimentos

@StepstoPodium 23 дня назад

Os rolamentos ja vem com massa regra geral e essa massa se não ficar contaminada, dura imenso tempo. Ao pôr massa no retentor, acaba por servir de barreira contra água que possa entrar e enferrujar os rolamentos.

@MrDanisify 23 дня назад

@@StepstoPodium Se o retentor tiver a funcionar bem não vai entrar agua. Mas sim percebo o porque. Obrigado e continuação de bons vídeos.

@Signature_move 3 года назад

Are the bearings the same size for all dirt bikes

@emmapringle1945 3 года назад

@hardrider5905 5 лет назад

Damn, those old bearings were FLOGGED!!

@StepstoPodium 5 лет назад

they weren't paying rent, so they had to go 😂

@lemontebrown566 2 года назад

Forgot the snap ring

@Steveman61 5 лет назад

Nice one! next time use new seals you scrimper :-)

@StepstoPodium 5 лет назад

budget rider, don't forget 😂

@palmajm5333 4 года назад

Cuidado com WD40 em borrachas!

@StepstoPodium 4 года назад

so é preocupante se se deixar grandes quantidades sem secar! Eu uso para limpar e não para lubrificar as borrachas 😉 Mas agradeço a preocupação e o comentário 😊

@palmajm5333 4 года назад

@@StepstoPodium Toda a gente faz, inclusive eu, é mais cómodo. É mesmo só para deixar o aviso pois há malta que pode não saber. Abraço!

@StepstoPodium 4 года назад

@@palmajm5333 agradeço deixares essa nota aqui nos comentários para o pessoal! 😉😊