No video :(

How To Change Your Turn Signal/combination Switch On A 2004-2008 Ford F-150

Подписаться 215 тыс.

Просмотров 190 тыс.

50% 1

Brian Eslick from How to Automotive www.howtoautomo... takes you step-by-step through the process of replacing the turn signal/combination switch on a 2004-2008 Ford F-150 without removing the steering wheel and airbag.
Affiliate link mentioned in the video for Motorcraft SW6377 Turn Indicator Switch amzn.to/2Ngru6s
New! How to Automotive T-shirts, stickers, and more! teespring.com/...
Affiliate link mentioned in the video for How to Automotive Tool Store www.amazon.com...
Website
For more videos, tips, and to purchase recommended tools and products visit my website at: www.howtoautomo...
Stay connected at:
Email: howtoautomotive@gmail.com
Facebook: / how-to- Automotive-432536836946801/?ref=settings
Google+: plus.google.co....
LinkedIn: / brian-esl. . 819839118
Disclaimer
Owing to factors beyond the control of How to Automotive/Brian Eslick, it cannot guarantee against unauthorized modification of this information, or improper use of this information. How to Automotive/Brian Eslick assumes no liability for property damage or injury incurred as a result of any information contained in this video. How to Automotive/Brian Eslick recommends safe practice when working with power tools, automotive lifts, lifting tools, jacks and jack stands, electrical equipment, blunt instruments, chemical lubricants, or any other tools or equipment seen or implied in this video. Because of factors beyond the control of How to Automotive/Brian Eslick, no information contained in this video shall express or imply warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or information contained in this video is the sole responsibility of the user and not How to Automotive/Brain Eslick. #HowtoAutomotive #FordF150

Опубликовано:

26 июн 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 221

@HowtoAutomotive 5 лет назад

Be sure to check out the How to Automotive Tool Store www.amazon.com/shop/howtoautomotive

@wbrenttduke 4 года назад

Is the donicoo for $35 any good?

@samrabena2720 2 года назад

Any chance you remember where you purchased your blinker arm thing? Mine recently broke and its exactly how yours was when It was wobbly. I cant seem to find it anywhere

@HowtoAutomotive 2 года назад

@@samrabena2720 in the description of the video there are links for it. May have to click the little arrow that drops the menu down more to see it.

@iamkazie9401 Год назад

@HowtoAutomotive this looks like a very easy process to change out the switch I watched your video a few times because I too am experiencing a problem with mine recently. If I push the lever forward to activate my bright lights sometimes it will work sometimes not a few times I had to push the lever inwards and at the same time forward too to activate the brights and also same way to get them to shut off so I’m assuming my switch is bad this is the only problem as of now is with the brights the wipers and turn signals are fine I’m glad you posted this video ! Is the switch still working good ? Im kind of a DIY guy and think I can handle this. Where did you get the new switch ? any other things I need to know or expect? Thanks for helping all of us!!

@iamkazie9401 Год назад

@HowtoAutomotive Thanks for such an awesome video this was actually an easy job the only panel that was a pain in the arse was the bottom one under the steering wheel a little cussing and pushing with a plastic radio removal tool got that piece out new switch went in like butter and just more cussing to get that under wheel piece back in lol I did disconnect negative battery cable before starting NOTE: before disconnecting battery move your drivers seat back as far as you can if your a bigger guy like me 230lbs lol. The extra room helps. Tools I used were 7/32 socket ( I had no 5.5 metric) 7 mm for two screws holding big bottom plastic panel 5/16 socket for battery cable removal plastic fork type stereo removal pry bar and a cup of coffee. Once switch was mounted I made sure all features worked and they did. I like how the new one is stiffer when activating the directionals in either direction. But then again my old one was oem since 2007. Thanks for your detailed video!!

@heidinewman9335 3 года назад

Super detailed video! Thanks so much. I'm a 60 year old grandmother and was able to replace mine by watching this. Having you tell us which screw size was a big help. I actually didn't have a 5.5mm socket but a 7/32 fit.

@jbutsch2301 6 месяцев назад

Thanks for the 7/32 piece of advice. Made this a cinch!

@stevenweiss6163 8 дней назад

It's the best video I have ever seen!!!! In fact, I bought the tools to remove the steering wheel since all videos were showing that. Thankfully, I had something else to do it and today, when I decided to install this part, I found this video making everything much easier. Thank you for your contribution!!!!!

@mikesmith4765 2 года назад

I checked 3 or 4 different socket sets and none had a 5.5mm socket, a little math showed that 7/32 is almost the same. Worked great for me. Thanks for the short and to the point video.

@jasonmartin2781 2 года назад

Thank you so much for making this video ! I was quoted 300 bucks for a new turn signal and the install. I found the turn signal on Amazon for 53 bucks and I installed it myself , I couldn't be any happier !!!

@freed991 3 года назад

wait a video on how to fix something on youtube where you don't have to listen to 20 mins about the history of the car or truck ... or what the guy fixing the truck is doing that weekend, or about his wife's cousin's, daughter's, boy friend's, next door neighbor's dog? How to automotive I think you are my new fave youtube channel of all time!

@bobc8951 5 лет назад

This seams much easier than removing the entire Steering Wheel just to get to the Multi-function Switch for replacement... THX

@johnholmes5152 3 года назад

GREAT VIDEO! Thank you SO MUCH for posting this. Ordered switch from Amazon and installed on my 2007 F150 following your instructions. Taking it all out was easy, putting a couple covers back in place took a bit of tweaking, but I got it done! I am NOT a do-it-yourself person, but I could do this thanks to you. Thanks again!!!

@davidshears1449 Месяц назад

One of the best helpful vids...out so far. Keep them coming. Proud owner of a 2006vford f150 5.4.

@adamcanton5889 3 месяца назад

Dude! Super easy. Hardest part was putting the bottom plastic piece that fits under the steering wheel. Took less that 15 minutes. Grateful!!

@TheThinker1717 3 года назад

FYI if you don't get the covers seated correctly around the ignition switch it might not engage. I needed a new battery anyway, but that could have been an avoided expense had I realized that the switch was not engaging enough to allow the truck to crank. Thank you so much for this video.... I, uh, (kick the dirt) won't say how long it took me, but it is done! :D

@dane9445 4 года назад

Thanks for the video! Very easy to follow step by step. Took me about a half hour to complete. Most of that time was getting the plastic housing back together and in place.

@amybarrington2191 2 года назад

Thank you so much! This video was perfect! I was going to take my truck to the dealership, but I decided to order my part and replace it myself. I am so grateful that you took the time to make this video!

@HowtoAutomotive 2 года назад

I’m glad it worked out and you were able to fix your truck. Thank you for watching!

@markjohnson4749 3 года назад

Son was able to do this after watching your video in less than 20 minutes. Thanks for saving me a lot of trouble and money.

@jmc_79 8 месяцев назад

I literally just replaced this in my F-150 tonight thanks to your video and I appreciate very much because you helped save a lot of money because I did it myself

@rvsquared 3 года назад

Dude! THANK YOU for posting this. It took me a little over an hour (I have 10 thumbs) but after wrestling the bottom section of the steering column back on required the most grunting effort, it looks and works great.

@georgeb6822 4 года назад

I just wanted to thank you for this video, I was hesitant about removing my airbag to replace this combo switch but coming across your video I didn’t have to.

@HowtoAutomotive 4 года назад

Glad the video helped. Thank you for watching!

@thrillbilly6147 6 месяцев назад

Thank you I just installed my $115 blinker switch for my 2007, Ford F150 XLT. Your instructions were clear and straight to the point….thanks again.

@williegee01 4 года назад

There is also a SPRING that inserts into a channel under the switch. Don't lose it when you lift the switch up from the column. Make sure you install it into the new switch.

@doityourself329 4 года назад

The new switch comes with a new spring inside

@frankiejones4816 3 года назад

Didn't know of about the springs. Seems to me it's working fine

@coolbananaboy5075 2 года назад

Worked like a dream ... thank you. Took45 minutes, total. Normally I'm very slow. Longest delay was getting the plastic covers back in place at the very end.

@JoshVigil5280 3 года назад

Man you save me a ton of money with this video! I Had the whole thing done in less than 20 minutes with the only hang up being the bottom plastic piece being so tight under the steering wheel. Thanks for the video!

@tomschloss9027 2 года назад

i did this on my 2007 King Ranch last night and i could not have done it without this video. Thank you!

@STritonX 4 года назад

Thanks for the video. I wasn't looking forward to having to remove the steering wheel. Your instructions made the process easy. Removed and replaced within 20 mins.

@gorilasanchez3152 3 месяца назад

I have the same priblem , now I order the part 4 fixed, tanks 4 the tutorial.

@cbtaylor3rd 4 года назад

Thank you very much for the easy to follow video. The first video I found had many steps. Requiring me to pull fuses, disassemble the airbag, blah, blah. At that point, I decided to call PepBoys. They didn't have the part so I researched again and found this video. It gave the confidence to go buy the part and do it myself. Bravo to you Sir greasy to follow instructions!

@victoringraham8546 2 года назад

I want to thank you for this video. It saved me a ton of money and gave me the confidence I needed to complete this. I have an 06 expedition and the only difference is instead of the 5.5 mm screws they are Phillips head. Super easy to do... thank you again!

@HowtoAutomotive 2 года назад

Glad the video was helpful and you saved money. Thank you for watching!

@nickolasbarba2338 4 года назад

Badass video!!! This saved me so much money and time 💯 thanks man you’re a life saver

@HowtoAutomotive 4 года назад

Nickolas Barba glad to help. Thank you for watching!

@burlmapleleafs 3 года назад

Sir Thank you so much. Out pulling a RV trailer far far from home. Watched the video. Went to parts source fixed it. Awesome You saved us. God bless

@Theolabbot 8 месяцев назад

Toughest part was that bottom trim, coming out & especially going back in. Helped when you described it as "flaring" those flanges that tuck into the steering wheel. Thanks & good job.

@mygripe 4 года назад

Soooo glad there is an alternative to removing the airbag .ton of $$ saved by not taking in to a shop thank you for the video

@wilrosh7 11 дней назад

This is a great video thank you. Made my life easier.

@quijibonegley9474 4 месяца назад

Excellent step by step. Great video. Clear audio. Made the job easy. Well done

@jasonfoley4652 4 года назад

Thanks for this helpful tutorial. I think I was able to knock mine out and switch the Assembly in 15 to 20 minutes thanks to this video of yours

@Bassikfundamentals 6 месяцев назад

Thanks so much saved me some serious time and headache

@bruceuberti1680 2 года назад

It took me about 40 minutes to replace, thanks to your very informative video. It DID take some finagling to get the bezels back together, but it worked. Thanks!

@donmiller2194 3 года назад

The bottom cover was a bear to put back on, but patience won out. Thank you so much for putting this video here on youtube.

@gbitm 4 года назад

Your video was very helpful. Everything went exactly as you said. I was prepared to remove the steering wheel and air bag, etc. Then I happened upon your video which seemed like a much easier job, as well as safer. About 20 minutes of work. Thank you again.

@micarguy8239 5 лет назад

Only vid on here that doesn’t want you to take the steering wheel off to do this job. BIG time saver. Thank you!

@dbucody 4 года назад

Thanks. Great video. Helped me out. The hardest thing for me was getting that plastic piece under the steering column back on. I got the left side up and then used s flathead to pop the right side up and seated properly. I couldn’t do it with my hands.

@marshallmotor-runner6713 5 месяцев назад

Thanks for the post, this video helped me get back on the road ! 👍👍👍

@HowtoAutomotive 5 месяцев назад

Glad the video helped you get back on the road. Thanks for watching!

@tihspeed71 4 года назад

Just wanted to say thanks for this video. No removal of the steering wheel! 45 minutes and I have turn signals again!

@fkp-1353 6 месяцев назад

Hi Brian, Thanks for taking the time to do this, it's an excellent how-to video and better than most I've seen. I just replaced the TS combination switch on my 2005 F-150 and everything went well EXCEPT when it came to getting the lower half of the plastic cover back onto the column.(I noticed this issue has been mentioned in several comments here.) After trying every possible angle and fighting with it for 15 minutes I started thinking it would have been faster and easier to just pull the steering wheel. I finally got it on somehow but I still have no idea how I finally got it into place. After the bottom cover was finally over the column I noticed the bottom and top halves were tweaked just enough that it was now impossible to get them to line up and snap together even though I worked on aligning them for about 15 minutes. It seems like the bottom plastic cover got stretched out of shape just enough that the two halves would no longer align properly leaving a small gap that would really bother me if this had been a newer vehicle. I noticed another video where the guy removed the mounting screw from the bottom half cover but didn't pull the cover completely off--he just let it dangle under the column, held in place by the cover's two plastic flanges which were still in place under the steering wheel. That might be something to consider. Anyway, just my experience and a heads-up to anyone thinking of doing this. Thanks again!

@CSmith-oz4wp 2 года назад

Thank you for this video, went step by step and behold I installed it, with a few hiccups from bottom small panel getting it back in. Can’t be afraid to bend the panel a little it won’t break. Didn’t take that long and saved probably hundreds. Thanks again

@HowtoAutomotive 2 года назад

Awesome I’m glad the video was helpful and you save some money. Thank you for watching!

@dgymnast6473 3 года назад

Great video. Much simpler than removing the steering wheel.

@sandracerda37 4 месяца назад

Thanks for the helpful tutorial. I'm not good with my hands, but your video gave me the confidence to do it.

@rickgillard2296 4 года назад

Excellent video. Have to change mine and didn't want to remove the airbag..now feel confident enough to tackle. Thanks 👍

@rustyholland2605 7 месяцев назад

Thank you so much for an easy play by play DIY instruction, all worked out well

@jacobpark4492 4 года назад

Now do one about rebuilding your transmission without removing any parts

@jeffmikers715 4 года назад

Excellent video that just saved countless dollars in labor. $130 for the part at O'Reilly and free labor! Thanks!!

@DavidMiller-fu8mh Год назад

Best video out for this type of problem. Hands down!👍

@California88304 6 месяцев назад

Thanks a lot, very usefull video and pretty detailed ! Hello from Tijuana, Baja California

@justmindingmyown Месяц назад

Wanted to thank you for sharing your knowledge, I followed your instructions and it went well, though putting the panel under the steering column was unfun. Thanks again...subbed

@HowtoAutomotive Месяц назад

@@justmindingmyown glad to help. Thank you for watching!

@robdmusic915 3 года назад

God bless you for providing this sir🙏🏼. Saved me money. That bottom cover is a doozy but doable.

@josefernandez6490 Год назад

Muchas gracias por el video...excelente información paso a paso desde principio a fin...again thank you for the excelent step by step video information..i have a 2006 f150 southern comfort truck

@chrisharrod3709 Год назад

Thanks for this demo.

@larrytempleton8154 2 года назад

Bottom plastic panel!!! 2 things. 1. I have no 5.5mm socket but 7/32 worked fine. 2. Most my time was spent on reinstalling that bottom trim panel. On a hunch, I started the truck and turned the steering wheel 1/4 left. Turn off and remove key.. Was able to get the panel in (dare I say "easily"?) by starting on the right side. Wasn't really easy but I was going nowhere otherwise. Great video. Even fighting that bottom panel it's still gotta be easier than steering wheel. removal.

@dianamorrissey2057 Год назад

Thanks. Nice to see exactly where bolts are located!

@HowtoAutomotive Год назад

Thank you for watching!

@TheDonutman44 Месяц назад

Awesome and very helpful video! Thx!👍🙏

@jdodgedo4 Год назад

Thank you so much for your detailed and to the point video, saved me time and headache.

@MrFrancoVega 2 года назад

The Best install video I have come across for this part, thank you!

@MikeHerron-t4m Месяц назад

Very helpful! Thank you very much!

@curryhd1 2 года назад

Thanks for the info and instructive video. I have a 2008 Eddie Bauer and while it has slight differences, the video walked me right through it.

@108jack88 2 года назад

Thanks! Very detailed video.

@otis808 2 года назад

So helpful. Especially for a dummie like me. Thanks so much. I used this video today to change my switch on my '07 Lincoln Mark LT. thanks again

@HowtoAutomotive 2 года назад

Glad the video was helpful. Thank you for watching!

@sandrac1015 2 года назад

This video helped me so much!! Your detailed instructions were so helpful. Thank you!! I’ll be sure to watch more videos to help me on other repairs

@davidlowery8570 2 года назад

thank you 🙏 so much for posting this. you saved me 500 bucks that’s what the dealer wanted

@HowtoAutomotive 2 года назад

Nice glad the video was helpful. Thank you for watching!

@crazymoon61 4 года назад

Thanks for the video. Did the job today in under 40 minutes!

@jerrywright812 3 года назад

Thanks so much. Less than 30 minutes start to finish.

@wynnokazaki8365 2 года назад

OUTSTANDING video and well done! I always though that the air bag needed to be removed but I guess not now ...

@davidoropez1219 3 года назад

Thank you for the info. Super helpful I just changed my switch on my 2006. Everything’s working. Keep up the helpful information. Good job

@anthonyreimonenq6529 2 года назад

How to put a ford f 250 in nutru manly

@anthonyreimonenq6529 2 года назад

How to put a F-250 in neutral manually how to put a Ford F-250 in neutral manually

@geologic740 5 лет назад

Well done, informative video. Glad to see Ford made some repairs easier for a change.

@HowtoAutomotive 5 лет назад

Ford actually want you to take the steering wheel off. That is a rare thing. Thank you for watching!

@harryjenkins3138 2 года назад

No ford just knew youd have to fix it lol

@doncollins3982 Год назад

Great video! Worse part was getting upper and lower plastic covers to fit. Actually decided to trim pieces to get them back in easier. Besides, only Ford would notice. Thanks!

@joseglez4741 3 года назад

Thank you so much I just installed my in my truck I just follow steps by steps was awesome man !! I really appreciate it

@jamesblake2054 2 года назад

Thank you for the video, did this on my own per your vid. Getting the plastic back together was a chore. Especially the last part of plastic housing. 1 1/2 hours job done. Disassembly 15 minutes, balance of time dickin with plastic.

@HowtoAutomotive 2 года назад

Glad the video was helpful. Thank you for watching!

@J.WannaFish 4 года назад

Just the video I'm looking for. Thanks for the big help.

@terp00 2 года назад

Thank you! Worked great on my 2006 F-150 FX4.

@dalehuddleston4390 2 года назад

Why you would have to pull the steering wheel is beyond me. You method was so simple. My wife should be very happy. Thanks, great video.

@HowtoAutomotive 2 года назад

Glad the video was helpful. Thank you for watching!

@lancewestveer8677 7 месяцев назад

Sweet. Took me 5 minutes to change in the Minnesota winter.

@martingomezjr7943 4 года назад

Very helpful, knocked mine out in about 20 min!

@acura318ls 3 года назад

Super easy and quick!! Thank you. Didnt want to take the steering wheel off.

@HowtoAutomotive 3 года назад

Thank you!

@ajayvirpariya8998 3 года назад

Hi thanks a lot for the video, really helpful. I was able to changed my signal assembly in no time. 👍👍👍

@josephhartnett5606 3 года назад

Thank you for this video 👍🏼 been meaning to do this but did not want to take the airbag out

@kaeda4297 5 месяцев назад

Really helpful thank you keep up the good work!

@HowtoAutomotive 5 месяцев назад

Thank you for watching!

@roo-jitsu3449 Год назад

precise and thorough. Steps for 2004 expedition almost exactly the same. Same part.

@rickasbury1688 Год назад

I've watched several of these- one mentions you have to pull out a small spring and transfer it. From the left side on the bottom, take it out with a pick. There is a tab on the left side that goes up into the new housing and that tab compresses the spring in place...

@93vanhalen Месяц назад

Well done!

@arthurmartinez8189 5 лет назад

Thanks for the great video. Other than the housing under the steering column (that was all me), I had very little problems changing out the switch.

@williamdewlen4059 3 года назад

Thank you for making this video!!

@RANDALLK01 4 года назад

Super helpful and to the point. Thanks for the video.

@gmracer01 3 года назад

Great howto video! Thank you for sharing!!

@cguy0171 2 года назад

Great how to video !! I just finished! Saved a bunch of time. However, I didn't put the spring back in. I only saw the reference to it after reading the comment below. With that being said, though, from the feel of the lever, it doesn't seem like it's needed after installing the recommended OEM part. Has anyone done the same and experienced any issues? I'm keeping the spring just in case and will go back in if something doesn't feel right or function properly. Thoughts?

@stevenhead7560 Год назад

Big help thanks

@Dan-mo4ek 3 года назад

Fantastic video! Thank you!

@luissegura3727 Год назад

great job....i just did mine....thanks sooooo much....

@HowtoAutomotive Год назад

Thank you for watching!

@germangonzalez9840 3 года назад

awesome i did the same as the video and came out perfect.. good tutorial

@americanveteran1 10 месяцев назад

Great instructions. I would add one thing to your instructions, turn the steering wheel to make sure arm returns to stop turn signal. I did not do this and got it all back together only to find out I now have to manually put the lever back after turning, not a big deal but a pain. I bought my part from Amazon, never will buy auto parts there again.