How to Check the B+ Safely - Tube Radio Restoration Back to Basics part 3

Подписаться 24 тыс.

Просмотров 3,9 тыс.

50% 1

A successful tube radio restoration starts with ensuring that power gets to all the right places. In this video we'll see how to do that safely - without powering up the radio.
I hope you enjoy the series, and invite you to comment.
🎥 Other videos in this series:
■ Back to Basics 1 - Tube Radio Anatomy: • The Parts That Make Up...
■ Back to Basics 2 - Tube Radio Anatomy: • Checking the Power Sup...
■ Back to Basics 3- Follow the B+: • How to Check the B+ Sa...
🙏 Want to support the channel? ●●●●●●
/ mcaldeira
paypal.me/macaldeira
#tuberadios #antiqueradio #radiorestoration
●●●● HUNDREDS OF OTHER VIDEOS TO CHOOSE FROM ●●●●
✿ DIY TEST GEAR: The title says it all:
• Zener Diode Tester - P...
✿ RESTORATION BUILDING BLOCKS: A series of videos showing detailed steps used the restoration process of tube equipment:
• How to safely check th...
✿ HowTo's: Various videos on some simple techniques and projects:
• Extend tube radio FM b...
✿ DIY CAPACITOR LEAKAGE TESTER PROJECT: One of the most viewed projects on my channel, with full design description and build instructions.
• Capacitor leakage test...
✿ DIY TUBE TESTER PROJECT: Complete design description and build instructions for this really handy device.
• DIY Tube Tester. Worki...
●●●● Plus full Playlists on some other completed restoration projects on this Channel ●●●●
📻 PHILIPS BX750A:
• Philips BX750A tube ra...
📻 TELEFUNKEN OPUS 2114:
• Telefunken Opus 2114 s...
📻 SABA UW-175-Z 3D:
• Saba UW 175-Z 3D tube ...
📻 GRUNDIG 1070:
• Grundig 1070 tube radi...
📻 SCHAUB-LORENZ GOLDY 58 type 3020:
• Schaub-Lorenz Goldy 58...
📻 BUSH VHF64:
• Bush VHF64 tube radio ...
📻 GRUNDIG 3060A:
• Grundig 3060a tube rad...
📻 TELEFUNKEN OPERETTE 8:
• Telefunken Operette 8 ...
📻 GRAETZ SUPER 171W:
• Graetz Super 171W tube...
📻 LOEWE-OPTA MAGNET 3737W:
• Loewe-Opta Magnet 3737...
📻 BRAUN ATELIER 3:
• Braun Atelier 3
📻 LOEWE-OPTA TRUXA STEREO 4741W:
• Loewe-Opta Truxa Stere...
📻 GRAETZ COMEDIA 616:
• Graetz Comedia 616 tub...
📻 SABA FREIBURG W2:
• Saba Freiburg W2 (WII)...
📻 GRAETZ MUSICA 4R417:
• Graetz Musica 4R417 re...

Наука

Опубликовано:

12 апр 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 61

@TrevorsBench 3 месяца назад

I find this confirmation testing interesting. It also teaches you about the circuit and gives you a idea about the health of the resistors. Well done Manuel

@electronicsoldandnew 3 месяца назад

👍

@DavidTipton101 3 месяца назад

New radio hobbyists will get a lot from this Manuel 👍😀

@electronicsoldandnew 3 месяца назад

👍

@Wil_Bloodworth 3 месяца назад

It does not get any better than this! This is exactly what people need and is what RU-vid is all about (in my opinion). Thank you sir!

@electronicsoldandnew 3 месяца назад

My pleasure

@ralphj4012 3 месяца назад

Good, methodical progress. At least 3.17% of us are still awake.

@electronicsoldandnew 3 месяца назад

😊

@RestorersShed 3 месяца назад

Brilliant!!! I can't tell you how long I've been hoping someone would make a series like this. As you yourself say - so many people assume a rather high level of knowledge in their videos. This series is pitched at exactly the right level for the beginner.Great videos, really well explained. Thank you so much for making the not inconsiderable effort to produce these fantastic videos - and thanks so much for sharing your knowledge and experience.

@electronicsoldandnew 3 месяца назад

My pleasure

@josephmagedanz4070 3 месяца назад

I'm wide awake and sitting in the front row to learn as much as I can from all this. I like your new approach to showing us how to go through a unknown radio to find out what is right and wrong with it. Thank you very much and looking forward to the next installment!

@electronicsoldandnew 3 месяца назад

Good to know you’re enjoying it 👍

@Forensic1Man 2 месяца назад

Well, after working in electronic repairs for over 50 years I today learned from you something brand new! The wrapping of the jumper wire first around a small screwdriver to make a coil that generates a lot of contact surface to attach the capacitor leads was and eye opener!! The soldering now is much stronger and you get a lot of contact wire to carry a sizable current. Good job!

@electronicsoldandnew 2 месяца назад

Thank you 👍

@lyntonprescott3412 3 месяца назад

Brilliant explanation, clear and easy to follow. I really appreciate that you are taking this time to demonstrate a logical way to perform important tests, even before power is applied. Well done sir. Lynton G4XCQ

@electronicsoldandnew 3 месяца назад

Thank you Lynton. I’m actually enjoying this process

@MarcelHuguenin 2 месяца назад

Hi Manuel, it was absolutely not boring at all, I found it quite interesting and your method of replacing the capacitors is also very elegant. Not only the fact you kept the can but more so the way you made de safe connections. Great job. I also find your way of checking the B+ this way and color coding the schematic very useful. All in all, very awake and not boring.

@electronicsoldandnew 2 месяца назад

👍

@capriracer351 3 месяца назад

This is perfect timing. I am restuffing 2 capacitor cans today. This gives me more ideas as to how I want to do that. Also, I have found that many times the ESR appears low because the cap is so leaky even at the low test voltage. One of the cans I am restuffing today had 5ma of leakage at 15 volts. it was rated for 450 volts. I slowly ramped the voltage up to the rated 450 volts as the leakage current went down, allowing the cap to reform. Then held that voltage for two days. Discharged the cap and applied voltage 1 day later and it was just as leaky as when I started. Definitely couldn't save that one.

@electronicsoldandnew 3 месяца назад

Most of them are t worth trying to reform as they do exactly that, unfortunately.

@JonRig 3 месяца назад

What more is there to say? Excellent video and series!!!

@electronicsoldandnew 3 месяца назад

Thanks

@heleneivers7669 3 месяца назад

thank you so much Manuel, you are pure gold.

@electronicsoldandnew 3 месяца назад

My pleasure

@johnkris753 3 месяца назад

When restuffing capacitor, you can anneal aluminium which will make bending much more easier and look better. I also do that to speaker grills on those small tabs that usually very easily break. Annealing makes it soft and maluable. Again very nice video. Cheers 👍👍👍

@electronicsoldandnew 3 месяца назад

Good tip 👍

@johnkris753 3 месяца назад

The proces is very simple. When you emptied shell of capacitor, use sharpie and draw circular line on the edge. Then use those small brenner lighter and heat the edge until sharpie line disappear. Let it aircool and then you can bend it like aluminium foil. Don't be scared that you ruined it because the minute you start shaping it, it will stiffen up. Hope i have helped.

@electronicsoldandnew 3 месяца назад

I’m going to give that a try 👍

@nonokia08 2 дня назад

Your Videos are so great! Thank you so much!!

@electronicsoldandnew 2 дня назад

My pleasure

@paulperano9236 3 месяца назад

Seen it before on your channel - BUT its good to do it again as it builds confidence. Thanks Manuel.

@electronicsoldandnew 3 месяца назад

👍

@dl7majstefan753 3 месяца назад

Mni tnx for this series dr.Manuel. (and i thought i know "everything" 🤔)

@electronicsoldandnew 3 месяца назад

I always watch your videos, and can confidently state that, compared to me, you probably DO know everything 😊 Some of the projects you take on are a great source of learning for me too. Thank you.

@tubeDude48 3 месяца назад

Making some great headway!

@electronicsoldandnew 3 месяца назад

👍

@BJcanal270 3 месяца назад

Thanks for sharing your knowledge

@electronicsoldandnew 3 месяца назад

Pleasure

@danielsaturnino5715 3 месяца назад

Thanks 😊

@electronicsoldandnew 3 месяца назад

👍

@daveturner5305 3 месяца назад

You might want to watch a recent episode of Mr. Carlson's Lab where he explains why he often uses a pipe cutter to split a can rather than mess with the folded lip.

@davidhamm5626 3 месяца назад

he did mention that as an option. Many people that do not do home plumbing, won't have a pipe cutter, and buying one for the few times that we would use it, is not economical.

@daveturner5305 3 месяца назад

@@davidhamm5626 You might want to view Mr. Carlson's episode yourself in order to realise why I suggested it. There is not a right or wrong way just alternatives.

@davidhamm5626 3 месяца назад

@@daveturner5305 Okay, I have used many methods, including that one on the cans. I still know people that do not have a pipe cutter, or a hack saw, and that buying one just to do these things, once in a while, does not add up. Do you have these items?

@daveturner5305 3 месяца назад

@@davidhamm5626 In a lifetime of various DIY projects one collects many tools. So yes I do.

@michvod 3 месяца назад

the method manuel showed is better for this type of capacitors...

@Stelios.Posantzis 3 месяца назад

12:33 I am very impressed!! You're the only one I've seen doing this and it seems you've become very handy at it! You should try to find a bent owl (perhaps a dentist tool?) to avoid keep poking your hand with the screwdriver. You know the lip on these is formed using rollers, right? I was wondering whether a similar contraption with a tiny roller could be invented, similar to a can opener, that can undo the lip, like you're showing here.

@electronicsoldandnew 3 месяца назад

I’ve tried various methods, and always revert back to this rather crude method. Won’t stop looking for a better alternative, though 😊

@Stelios.Posantzis 3 месяца назад

11:31 This is when having two right hands comes in very handy (pun intended).

@electronicsoldandnew 3 месяца назад

😊 yes, that edit does look weird

@ricardoaliasdelatorre6836 3 месяца назад

Manuel , this chassis carries 150micro F quite big elco capacitor,which is the total current amount at full power?. Thanks in advance

@electronicsoldandnew 3 месяца назад

I believe it mentions about 100mA on the schematic

@Edisson. 3 месяца назад

Hi, nicely done and explained, I am fitting a 100nF ceramic capacitor to the rectifier, the electrolytic capacitor does not filter the rectifier noise. Edit: I primarily test capacitors at their operating frequency. Nice day 🙂Tom

@electronicsoldandnew 3 месяца назад

👍

@mackfisher4487 3 месяца назад

RU-vid translate tool: Found the Google translator tool under More, does that translate to the viewers native language? I heard rumor that Google was implementing a tool that would allow a viewer to heir and see a video made in one language automatically be translated the voice into the viewers native language. That might get your viewership high enough for your daughter to do an intro.

@electronicsoldandnew 3 месяца назад

😊 I still haven’t checked it out properly, but my daughter won’t need the translator. She’s quite fluent in English.

@mackfisher4487 3 месяца назад

Yes my comment was off topic, and no way helpful to those future radio technicians to mastering the obscure art of German radio restoration. I do however think your daughter may need small animal language translations. Enjoyed his as usual

@electronicsoldandnew 3 месяца назад

😊