How to check the charging cable path for the old or old yamaha jupiter mx battery, 135 Starting from the road spool, kiprok and also the battery.
The first steps we have to check are:
1. the white cable in the kiprok socket, make sure the current is there, and measure it using a multitester at 50 volts ac, and the current must be 12 -15 volts ace.
2. check the red wire for the output current from kiprok to the battery plus with a multitester, and the number must be at 50 volts dc and the result should be 12-15 volts DC.
and if the result of the spool or kiprok output is less than 12, for example at number 10 and below or exceeding number 15, then the spool or kiprok is damaged.
3. check the black wire to make sure it is attached to the body or motor frame.
if the black cable is not attached to the body or frame of the motorcycle, then the battery charging will not work and the light path will quickly turn off when gassing, even though the road spool and kiprok are good
Thank you very much to all #SUBSCRIBER# and viewers wherever you are, hopefully the knowledge is useful.
please #subscribe#
@IBOT MOTOR CHANNEL
If you have questions, you can write them in the comments.
Tel/WA: 085863491419.
Thank you very much.
24 май 2021