How to Choose the Right Glue in Jewelry Making

Подписаться 671 тыс.

Просмотров 216 тыс.

50% 1

beadaholique.com - There are so many different types of glue that we use in jewelry and it can be a bit confusing as to which one you should choose for a specific project. This video goes over 4 common glues: E6000, Nunn Design Glue, Crafter's Pick, and GS Hypo-Cement and talks about each one and what makes it special. Various application examples are also given.
Designer: Julie Bean
You can find the supplies in this video at Beadaholique.com
E6000 Industrial Strength Glue Adhesive (3.7 Oz)
SKU: XTL-1050
beadaholique.com/products/e60...
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
SKU: XTL-1054
beadaholique.com/products/e60...
Crafter's Pick The Ultimate Permanent Glue Cement Adhesive 4 OZ
SKU: XTL-1026
beadaholique.com/products/cra...
G S Hypo Cement Precise Applicator Essential!
SKU: XTL-1001
beadaholique.com/products/g-s...
Nunn Design Glue Adhesive 2 oz. - For Patera Findings (1)
SKU: XTL-1031
beadaholique.com/products/nun...
Beadalon Large Beading Mats - Prevent Bead Rolling 13 X 18 Inch (Set of 2)
SKU: XTL-9935
beadaholique.com/products/bea...

Хобби

Опубликовано:

14 окт 2012

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 300

@mjg5318 2 года назад

Blessed by the maker

@melancholy613 2 года назад

i was literally lookin for a drain comment

@amp4105 4 года назад

moving like a laser

@caampb3ll 2 года назад

Blessed by the maker 👁

@azur7160 2 года назад

ralph lauren label, upgrade enabled

@Ken_Rangga 2 года назад

0:35 3:32 obscure drain lore

@dvidtms Год назад

literally not obscure at all…

@suiclide4205 6 лет назад

STANDING IN THE SHADOWS MOVING LIKE A LASER

@Spursinhoo 4 года назад

3:32 Blessed moment

@ylva1225 2 года назад

upgrade enabled

@iceefuture8325 2 года назад

STANDING IN THE SHADOOOOOOOOOOOOW MOVING LIKE A LAZER

@broc 3 года назад

good gluee

@beadaholique 3 года назад

Thanks!

@3GUDSHAWTYYY Год назад

I LOVE BLADEE I LOVE GLUEE I LOVE DRAIN GTBSB

@bloodveiI Год назад

standing in the shadowss

@matthewscalzo1815 6 лет назад

STANDING IN THE SHADOWS

@youngbaseddolphin 5 лет назад

drain ganggg

@NotTylr 2 года назад

Is it strange knowing that an artist just has you talking about gluee in a song?

@beadaholique 2 года назад

Sure, strange a good way. It was really fun figuring out why this video was suddenly so much more popular.

@iceefuture8325 2 года назад

TALKING ABOUT GLUEE IN GLUEE

@zaphyra- 3 года назад

Beadaholique are you a fan of Bladee?

@beadaholique 3 года назад

Yeah a few of us here checked out Gluee once we found out about the sample, I like his sound

@iceefuture8325 2 года назад

@@beadaholique drained

@everlastingflames 2 года назад

standing in the shadows moving like a laser...

@-secretdivinity 6 лет назад

Standing in the shadows, moving like a laser

@cotashono 6 лет назад

@akldca Год назад

Upgrade enabled

@alexr7248 Год назад

Ralph Lauren label upgrade enabled

@ogfaIlen 2 года назад

fr tho how tf yall find this sample drainers rly b somethin else

@iceefuture8325 2 года назад

You're literally in a bladee album

@dvidtms Год назад

i wonder if she knows 😂

@feliperobles2797 Год назад

One of the best videos I’ve seen on adhesives

@spellcasteraggiev6012 5 лет назад

I think it's worth mentioning that E6000 has some flexibility to it, which can be a great asset too.

@bladeeecity Год назад

standing in the shadows

@parker1856 Год назад

ralph lauren label

@Bobbycee1111 5 лет назад

DRAIN GANG!!

@beadaholique 11 лет назад

If E6000 is giving you trouble we have three different glues that are rhinestone friendly in the adhesives category of our website, GS Hypo Cement Glue Precise Applicator Essential, Gem-Tac Permanent Glue Cement Adhesive, and Gem-Tac Permanent Glue Cement Adhesive. Click on the link for Adhesives in the video description underneath this video. We've yet to experience any clouding with our glues and are not sure how to solve clouding for you if we don't know how it was caused.

@zandrasbrown 5 лет назад

Thank you thank you thank you. So helpful. You saved my day.

@design321 4 года назад

Very nicely done. Succinct. Answered my question. Thank you!

@honeybunproductions6081 6 лет назад

THANK YOU! I am very new to jewelry repair. This is a great video!

@beadaholique 6 лет назад

Thanks for watching!

@smeh2198 2 года назад

BLADEE

@Methelinhill 10 лет назад

Thanks for the information, it was very helpful!

@aloneandafraid4ever 2 года назад

drained

@wrenbyrd1093 5 месяцев назад

Great! I need the E6000. I’m making slide satin cord bracelets and one of the people in the videos was even using this. 😊

@sg_app6011 2 года назад

I'm here because of Bladee

@iceefuture8325 2 года назад

blakee1000

@crazycatladybj 11 лет назад

Thanks! It is confusing to know which to use. This was a good primer.

@beadaholique 9 лет назад

Brittany Headbang It depends on how thick your metal rings are. If they are quite thick and there is enough metal touching metal, then I think they will hold. However, it also depends on the weight of the chain and the rings, if it is incredibly heavy, then it might not hold.

@JuJuCrafts 10 лет назад

E6000 is definitely the "Duct Tape" of the crafting world, I use it for almost everything from little rhinestones to chunky car parts that I glue on for larger steampunk projects. I have had the same experience with E6000 (as well as other glues) as AnaRosa -the actual rhinestone will fall off simply leaving the foil attached to the project with the glue. The only way around this I've found is to make sure a touch of the E6000 is slightly on the side edges of the rhinestone. It dries clear and if "barely" on the gem, you can't tell.

@Spursinhoo 5 лет назад

Only true drainers watch this video

@broc 3 года назад

football play it like i'm harry kane ⚽️

@Octopixel40 3 месяца назад

@@broc insect gang eat everything 🐛😋

@kaymoon999 11 лет назад

Thank you for the helpful info, I have more clarity now

@bonniekonjevich7574 6 лет назад

THANKS SO MUCH!!! Alcohol has been useful to me in a pinch to remove some glues. My hand sanitizer worked for my E-7000

@daisy3690 11 лет назад

very informative and helpful thanks for sharing

@02gioele 3 года назад

drain

@iceefuture8325 2 года назад

gang

@lindapruneau 11 лет назад

I use the E6000 for everything.I kept a leather belt for two yrs longer with E6000 and I recently used it to glue the plastic back of my kitchen grill back on after my new cat knocked it onto the floor and broke it.This stuff is the best.I find I prefer to use my hands to apply it most of the time and it just peels off after it dries.

@masosaur 11 лет назад

I have B6000 and I used on suede cord and nylon cord and beads and it is great ;) it is the best glue for my hand made jewerely I have ever used ;)

@beadaholique 11 лет назад

GS Hypocement would be good for rhinestones. E6000 is one of those glues which is affected by temperature and how old your bottle is. For a new bottle in a mild temperature environment, I find that I have about 5 minutes, especially if it is a pretty big glob that I am using. If I am just using a tiny bit, it does dry quite a bit quicker. Also, I find it dries quicker during the summer heat.

@beadaholique 11 лет назад

GS HypoCement would be a good choice for rhinestones and it should not affect their shine. If you are worried about their shine, just make sure to only apply the glue to the backside of the rhinestone and not get any on the front.

@lilianaleyva2763 8 лет назад

Thank you for your video. Do you think the E6000 would be good to put glass seed beads on a sunglasses? Thank you again.

@TrevorOFarrell 6 лет назад

Gluee

@NCoffin1752 8 лет назад

Im trying to make a tiara using a metal head band what kind of glue would work best?

@iemwill9429 2 года назад

can you use nail polish remover or rubbing alchol to get rid the GS Hypo glue when you're done using it?

@beadaholique 11 лет назад

The GS HypoCement should work well for a phone case. Just a word of caution, phones get knocked around quite a bit so whatever you stick on a phone case, will most likely come off over time. You will want to have some extras of whatever you are adhering. If it's a big solid object, I would suggest E6000 glue.

@eileenfb1948 11 лет назад

This video is most helpful. It would be useful to state what type of main ingredient is in the glue so that in the UK or other countries we can look for an equivalent. Such as PVA in the UK is the same as Elmer's. I love watching your videos and you have a good calm voice, thank you from Scotland

@jakob703 2 года назад

iconic drain moment

@RubyStandingDEER 8 лет назад

would you recommend using the E6000 for foil back swarovski crystals to lacy? I have had the mirror on buttons come right off. What am I doing wrong?

@paulapower8505 7 лет назад

Hi, you mentioned cabachons in talking about E6000 glue. I wonder if it can be used with semi-precious gemstones, or are there some it shouldn't be used with, like perhaps Opals or Selenite? Thanks in advance, P, in Liverpool, UK.

@jude1515 2 года назад

Good video. I always struggle with which glue to use with which project.

@beadaholique 2 года назад

You and me both!))

@annemarielei1 Год назад

Thank you ❤

@brittanyheadbang 9 лет назад

So would the E 6000 be best for metal work? I'm glueing chains to metal rings. Will it hold and not look sloppy?

@beadaholique 9 лет назад

cjay G I do like to use E6000 to glue them to metal.

@dark_all_day9311 8 месяцев назад

STANDING IN THE SHADOWS MOVING LIKE A LAZERR

@beadaholique 11 лет назад

Hi! I am sorry but I am not familiar with Ca glue so I can not compare it to E6000. I can say that I glued the the side mirror onto my car with E6000 after it was totally smashed off and it held for 5 years until I sold the car. I am also unfortunately not familiar with what is used to fill in the cracks in gemstones.

@Justthefurofus 9 лет назад

would you recommend using the E6000 for foil back swarovski crystals to metal or putter?

@mareugeni Год назад

Hi.what would you recommend to glue a Pearl on metal earring . I have a couple earrings with missed pearls .Thank you 😊

@shereyscherries2707 4 года назад

Why is everyone saying " standing in the shadows moving like a laser!!

@beatleswithaz6246 4 года назад

They are reffering to the song "upgrade enabled" by Bladee, in which he says samples this video before he says "standing in the shadows moving like a laser."

@arlenesherman8014 11 лет назад

I am a believer in making sure my jewelry pieces don't fall apart once sold or given away. Super glue is my go to for that!

@Herguiltypleasure 6 месяцев назад

What kind of super glue? I really hate when my stone fall off it feels like my item is poorly made

@criistiinaxxoo 11 лет назад

Which glue would you recommend if I want to glue a crystal point into a bullet casing? In essence natural quartz crystal bonded to metal.

@kanjagkollaeller 5 лет назад

Nunnedesign. Paper will not warp. Gshypesement Allows you to get fine line. Pearls, knots, small areas Crafters pick Waterbased but water resistant. Nice E6000 Fave glue. Clears up after 24hrs.

@shastastan1935 4 месяца назад

I just used the GS Hypo to glue a bail onto a cabochon. The tip gives great control, but it's somewhat difficult to get the cap pin back into the tip. I have to use a magnifier light for that.

@beadaholique 4 месяца назад

Yes, I agree. That cap can be a challenge

@hypnozzz 11 лет назад

I tried GS hypo cement for stretch bracelets to hide the knot inside a stone bead. I was really disappointed because it didn't last as long as the Loctite Power Glue (Repair Extreme) which I'm using now, which is great.

@singerandrummer4life 10 лет назад

Ok I make rings and I'm starting to get more business. I'm getting ready to make a ring for a girl I know and she has two stones that she wants on the ring but there isn't holes in them so I need to glue the stones on. What glue should I use? I need one that will really stay an is waterproof

@ra1ncheck 3 года назад

DRAAAAINNN GAAAANG

@iceefuture8325 2 года назад

AYYYYYYYYYYYYYYYY

@Pawl4k 3 года назад

3:32 and X 0,5

@peacelovemiffy 11 лет назад

Useful post, thanks. For putting embellishments on sunglasses do u recommend the cement or E6000 please? i am trying both but would be interested in your thoughts. Thanks :)

@MajikMajikMajik 10 лет назад

Hi, this was very helpful. I would like to know if you have a suggestion on what type of gloves to wear when using E6000 and also what sort of gloves to wear when mixing resin. Thanks :)

@beadaholique 10 лет назад

I just use inexpensive disposable gloves that I buy on Amazon. There are a lot of different companies, some are latex and some are latex free. You are basically just trying to not get resin on your hands.

@lilyruff1411 4 года назад

Are these safe to go onto your skin after they dry?

@beadaholique 11 лет назад

Hi! I actually have not heard of the other variations of E6000, I am sorry. Since we do not carry these other ones, I am afraid I can not speak to what the differences are or how they work.

@beadaholique 11 лет назад

You would want to use the GS HypoCement to secure the knot.

@LuminousBling 11 лет назад

Hello, i make phone cases and when i use e6000 glue it breaks up the foil on the back of the rhinestones. Which glue do you suggest so that it doesnt break of the foil??? thank you!

@beadaholique 11 лет назад

Hi! I am a little unclear on what you are asking. I think you want to glue some beads together to make a cross. If this is the case, I would suggest using E6000 glue.

@beadaholique 11 лет назад

Hi, E6000 would be a good choice, it is very sturdy and durable.

@beadaholique 11 лет назад

Hi! Some people are more sensitive to the fumes then others, so it is a little hard for me to say exactly what will or will not have a strong odor to you personally. For instance, I know some glues that I think are fine my husband finds really strong. Most people do not really notice an odor with Crafters Pick Glue or Nunn Design Glue. E6000 does have a strong odor and it is best to work in a well ventilated area.

@visage161 3 года назад

you fw swedish boys wit autotune?

@drain2375 5 лет назад

UPGRADE ENABLED

@MrMinimalSWN 11 лет назад

Hey, I'm actually looking for a glue that' clear,... cheaper than cyano acrolate, but at the same time much stronger (for stabilizing wood in a vacuum) that should be appropriate for "heavy-wear-out" applications (like guitar picks). Could you give me your insights about the E6000 vs Ca glue? Also do you have any idea of what diamond and opal cutters use to fill cracks in gemstones? Thanks for your advice, it' really much appreciated. Greets

@sndygskylr 2 года назад

Thank you soo much!

@beadaholique 2 года назад

Glad we could help!

@sumeraki2424 2 года назад

which s best for sticking post on studs

@AXOXOJ 11 лет назад

HI if I use the hypo cement glue for ringtones But I don't want to take the shinny out of the rhinestones =\ you think is a perfect glue for rhinestone thanks!for you help!

@may_ner_wardmay_tan7541 7 лет назад

how can i rwmove glue on my ring???i put glue on it n i dont like it n now i dnt know how to remove it???

@ItsTiffanyJ 11 лет назад

can i use cement for phone case

@Angiidoll 11 лет назад

i like the gs hypocement because of the tip, would it be good for rhinestones? (DIY phonecases) You also mentioned that the e6000 glue gives you around 5 minutes movement time, but i find that the one i have dries really quick, is it just mine?? :/

@ogfaIlen 2 года назад

draaaaain gaaaaang

@FrancescaDresda 10 лет назад

which glue is ideal for bonding rhinestones on a bra? although in this video I talk about it I do not speak English very well and I can not understand what is the right glue to buy, so that adheres to the fabric and rhinestones.

@beadaholique 10 лет назад

I would recommend GS Hypo Fabric Cement. Here is a link: www.beadaholique.com/p-10551-g-s-hypo-fabric-cement-glue-precise-rhinestones.aspx?RU-vid&

@LuminousBling 11 лет назад

oh i am looking for something that holds as strong as e6000 but doesnt cloud the rhinestones.

@ApostropheKay 11 лет назад

Thanks for the vid :)

@pertrice25 6 лет назад

Is there anything you can use to seal the foil backing of the rhinestone before applying e-6000 because it seems to eat through it

@beadaholique 6 лет назад

We suggest a different adhesive like Crafter's Pick. Should be less corrosive. It dries clear too.

@blareiamblareiam3861 Месяц назад

awesome

@beadaholique 11 лет назад

There is an odor, almost like a marker fume, but you use it for such a short period of time and in such small amounts, that I personally do not find it overwhelming.

@beadaholique 11 лет назад

I would use E6000 for this application.

@mzangel7ify 11 лет назад

My E6000 didnt hold my rhinestones where i glued it :(

@beadaholique 10 лет назад

@singerandrummer4life - I would suggest E6000 glue.

@evanalley1458 5 лет назад

Drain gang

@LauraCostellodiycrafts 10 лет назад

l have tried using E6000 and found that a lot came out of the tip if l pressed it a little too much and a wispy thread would come out. Is there any way of getting around this? I just tried the Hypo cement to glue a plastic part to surgical steel earring posts. I also got a wispy thread with this product also. Is this a good match, or should l try something else?

@beadaholique 10 лет назад

I really have not found a good alternative to E6000 and yes, a lot does come out when you just squeeze a little. As you work your way into the bottle, you will notice that the spilling out effect lessens. I have not found a way around the stringy stuff.