How To Clean 3D Resin Prints Without A Wash & Cure Station - Triple Dunk IPA Technique

Подписаться 3,1 тыс.

Просмотров 42 тыс.

50% 1

Please LIKE & SUBSCRIBE now!
Here's how to clean 3D resin prints using IPA (Isopropyl Alcohol) and plastic pickle jars. No wash and cure station or ultrasonic cleaning device necessary.
Follow us here:
Instagram: / 3dprintingminis
Twitter: /
Here are affiliate links to the 3D printing items featured in this video:
Respirator mask with Filters Set - Reusable Half Facepiece Cover with 4pcs: amzn.to/444TP1U
Whaply Black Light UV Flashlight, 51 LED Blacklight Flashlights: amzn.to/3NiWeQa
Disposable Black Nitrile Gloves Large 200 Count - Extra Thick 4.5 Mil
amzn.to/3V8vlkd
2 Pack UV Flashlight Black Light
amzn.to/3ULRVz5
Lock & Lock Pickle Container HPL933BT
amzn.to/3tHy2gA
99% Isopropyl Alcohol For Technical Use, 16 Fl Oz (Pack of 12)
amzn.to/3GlgONF
Waterproof Anti-Slip Silicone Pet Food and Water Bowl Mat
amzn.to/3Anc0U9
ELEGOO Resin 3D Printer Mars 2 Pro Mono MSLA 3D Printer
amzn.to/3V4Yb4N
Phrozen Sonic Mighty 4K Large LCD Resin 3D Printer
amzn.to/3OgqkUh
Phrozen Sonic Mini 8K LCD Resin 3D Printer
amzn.to/3ghnodp
EPAX 3D Printer Hard Resin for LCD 3D Printers
amzn.to/3E7wmly
Siraya Tech Fast ABS-Like 3D Printer Resin
amzn.to/3AqVd2D
Siraya Tech Tenacious 3D Printer Resin
amzn.to/3TDW07j
Velrock Dragonborn Models On Kickstarter:
www.kickstarter.com/projects/...
#dungeonsanddragons #dnd #dungeons #dragons #rpg #ttrpg #fantasy #tabletopgames #3dprintedminiature #3dprintedminiature #3dprinter #3dprinting #dndminiature #dndminiatures #monster #miniatures #miniaturepainting #skeleton #wizard #criticalrole #dnd5e #5e #phrozen #phrozenmighty4k #diy #science #technology #elegoo #anycubic #creatlity

Наука

Опубликовано:

16 ноя 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 42

@absolutelyfookinnobody2843 4 месяца назад

Yes, I agree about the respirator. BUT there are different respirator for different things. Make sure you know what to get. Is resin fumes considered vapor? If so, then you want a respirator for vapors

@Slurgical_3D_Terrain_Channel 7 месяцев назад

Thanks, I surely be going to watch the rest of your video and channel. I haven’t made the leap yet to resin, but this will certainly prepare me.

@terrylyn 4 месяца назад

Very good information, much better than the other channels, thanks.

@David-ey9jg 8 месяцев назад

Why not use the one basket and move it to each tub?

@LanceJoshlin 6 месяцев назад

You’d probably risk dragging trash resin over with it. Also I’d imagine those jars came with the baskets so why not use them, transferring the prints between baskets allows for a little more cleaning during the transfer process.

@charlesroth6581 18 дней назад

Nice surf boards dude 🎉I surf myself working on my first mini print from elegoo mars 3 thanks for the helpful tip

@imsteampowered 4 месяца назад

Thank you for sharing this fantastic video! I own an Anycubic Photon M3 Max, and I've been experiencing some difficulties when printing a bottle cap. I recently acquired the Wash and Cure Max, and I must say, your approach yields much better results! However, I'm struggling with resin layer separation despite printing at a thickness of 0.05 as per the ABS-Like Resin Pro manufacturer's recommendations. Any advice you could offer would be greatly appreciated. Awesome video!

@craigv367godsman4 2 месяца назад

Great video and very informative. Thank you for sharing the links to all the supplies. Can you tell me what size the tray is and where you got it, the one you use to scrap the parts off the build plate into.

@rexmagi4606 Месяц назад

Concerning the "drying over night", I dont think they are drying from the IPA, they're just chilling. 99% IPA dries in like a minute or two if its just a small coating and does not leave residue. Just pointing that out.

@marcocerda3777 3 месяца назад

Just out of curiosity not sure if you said it in the video briefly and I missed it but how often do we change the alcohol from the containers?

@g.o.a.t9804 6 месяцев назад

QUESTION: Do you mix water with the IPA in those 3 containers?? Or their all 100% IPA?? Thanks

@user-tl8tm8or5h 6 месяцев назад

This felt like one of those "perfect" videos, where start to finish, you're professional, informative and offered the links that will help us out a ton!! Thank you for this :) (I've got all the Amazon links open in new tabs!)

@ZygiArtStudio 7 месяцев назад

Did the draying models are still toxic after wash?

@kalzyoung 17 дней назад

How can I stop the resin from running? Sometimes it keeps running after I paint them. Please tell me what I’m doing wrong

@darkangel8989 Год назад

How long does it take your flashlight to cure trace / very small amounts of resin when cleaning up as you described to make it safe?

@3DPrintingMinis Год назад

Resin is toxic so I'm not sure it's every actually 100%. You'll need to contact your resin's manufacturer for an answer to this question.

@Avymit25 Год назад

How long do you put the prints under a UV light after washing?

@3DPrintingMinis Год назад

It depends on your resin brand and curing station. With my setup I cure my miniature prints for 3 mins.

@AbdulAziz-cj4hg Год назад

I live in tropical country, would you recommend to use sunlight to cure? And why do i need to dry it overnight, what big differences it would make?

@Silver803 Год назад

You can use sunlight, it just takes longer. instead of a few minutes itll be several hours

@valentinfigueroa5663 Год назад

you'd want to make sure prints are dried completely or risk the chance that they'd leave a chalky white residue when they cure. Drying it overnight is extensive but long as they look dry enough, you should be good

@jonathanoverlin795 27 дней назад

does the IPA eat the basket?

@PokeMonster_Pulls_Minis Год назад

Just curious why did you go from Mean Green to IPA? Trying to maybe go with less of an aggressive chemical smell and was thinking towards the mean green. Thanks.

@3DPrintingMinis Год назад

I figured out a way to clean my prints without needing the ultra sonic cleaner. Plus, when the ipa gets dirty I can transfer the good top part to another container and then cure and evaporate off the unsalvageable remaining ipa. Using the Simple Green made too many containers of murky waste liquid that I needed to take to the special waste dump. And ipa has come down in price considerably since the height of the pandemic, so it’s easier and more affordable to get.

@glennedward2201 Год назад

@@3DPrintingMinisYou’re using the Ultrasonic incorrectly. Please don’t put any chemicals in your ultrasonic besides distilled water. My ultrasonic has a basket in it because parts should never touch the bottom. Use a smaller Tupperware container and lid with IPA and set it in the basket of the ultra sonic being sure that its submerged. If needed you can hot glue some weight on the bottom so that it wont float. Leave it in there 3-5 minutes and let it clean your parts. This is much better than a shake, or stir. That is it, nothing else and and guess what? Now you can use your ultrasonic for any type of cleaning and by always using the proper cleaner per item and never contaminating the ultrasonic machine it saves time, materials, IPA, etc, and most of all it saves your equipment. Give it a try.

@user-ji5gp8nv7w 9 месяцев назад

@@glennedward2201именно! Вы говорите о том, чтобы погрузить контейнер в объём воды, при этом не касаясь дна. Блестяще!

@JohnSmith-rt5yq 8 месяцев назад

What is that blue.... Towel? In the box. Is it disposable? Im using a tupperware but no towel and its messy... If i know what that is, i may pock up some of that blue towel.

@nightworkstuido4249 7 месяцев назад

It’s just a normal work shop paper towel

@Zombie51324 Год назад

We’re is the link to the respirator and the flashlight

@3DPrintingMinis Год назад

Respirator mask with Filters Set - Reusable Half Facepiece Cover with 4pcs: amzn.to/444TP1U Whaply Black Light UV Flashlight, 51 LED Blacklight Flashlights: amzn.to/3NiWeQa

@jamesdenny4734 7 месяцев назад

Didn't you just wash n later cured these items at a makeshift station?

@AFV85 11 месяцев назад

The cleanest dirtiest IPA kve seen yet haha

@3DPrintingMinis 11 месяцев назад

I try to take care of my stuff. It gives better prints. -)

@SEMARPE 2 месяца назад

relax bro

@InitiallyJB Год назад

I like your set up but why no glycerin.

@3DPrintingMinis Год назад

Because that’s not what I’m using in this video.🤷‍♂️

@Sin_Alder 10 месяцев назад

Honestly, I'm kind of shocked that you talk (and now that I think about it, a lot of people the resin print) about the IPA burning your nose, but not seeming bothered about taking the prints out of your printer. Personally, while I wouldn't call the smell of IPA pleasant, resin stinks to high heaven for me, even through a mask, and IPA doesn't really burn my nose either. If just dealing with IPA was the only thing I had to worry about with resin printing, mine wouldn't be collecting dust in the attic until I decide to take another crack at it.

@IIIReptarIII-TCPH 10 месяцев назад

If you can smell the resin through the mask, you have a poor seal / bad respirator. A N95 isn't going to help, you need a full on respirator mask. I suggest the PD-101 full face, and remember the cartridges only last about 3 hours before you need to change them. Hope this helps.