No video :(

Resin 3D Printing Cleaning Process and Safety Tips

Подписаться 9 тыс.

Просмотров 5 тыс.

50% 1

In todays video I'll be covering my 3D printing cleaning process since I've changed to the Elegoo Mercury XS.
If you want to support the channel, head on over to my Patreon page: / grayscalpminiatures
Come join the Discord channel: / discord
My equipment:
Elegoo Mars 3: amzn.to/3GJlZ6Q
Elegoo Wash and Cure: amzn.to/3mif3Gh
Elegoo ABS Like Resin: amzn.to/3q8id0n
Army Painter Speedpaints: amzn.to/3dDXejo
Elegoo Mars 3 Screen Protector: amzn.to/3wl4FCQ
Iwata Airbrush: amzn.to/3T52PzL
Airbrush Compressor: amzn.to/3pWmDrL
Sony A6400: US: amzn.to/3tqBPhK UK: amzn.to/394CoV7
My Affiliates:
Amazon: amzn.to/3rWlWgm
Audible: amzn.to/3dEaErX
VPN PIA: www.privateint......
Tube Buddy: www.tubebuddy....
Social:
INSTAGRAM: / grayscalpminiatures
FACEBOOK: / grayscalpminiatures
CREDITS:
MUSIC: www.epidemicso....
DISCLAIMER: Links in this description may be affiliate links. If you purchase a product or service with the links provided I may earn a commission. You receive no additional charge, these links are included to help support the channel.

Опубликовано:

26 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 14

@FelixTheAnimator Год назад

Thank you for talking about safety! Too few people are!

@GrayScalpMiniatures Год назад

I wasn’t going to add it to this video originally as I know there are others who will cover it much better than I can, but I figured that there might be some who watch my channel and if I never at least cover it slightly then it could be overlooked.

@helixxharpell Год назад

Awesome video! Thank you for taking the time to share these tips. Very grateful sir!

@Rednec_Patriot 9 дней назад

Do you just put them in straight alcohol or is it a mix of water and alcohol?

@GeneralKetchup57 5 месяцев назад

Thank you, do you ever take the supports off before you do your first wash? I just started and use Water-Washable ABS Like resin. I take the supports off, wash the part in dirty water, then put into my Elegoo Mercury wash station. The wash station says to use IPA instead of water. The wash ipa is very clean.

@AmishGramish Год назад

One thing I'm surprised about is the effect of IPA and the ability for (proper) masks to block the vapors. A mask is very important to use when cleaning with IPA. I also do some sanding afterwards, which definitely requires a proper mask. (Also, I rub the sanded areas while immersed in IPA to safely remove the plastic without it being released into the wild.)

@GrayScalpMiniatures Год назад

That’s an interesting tip about the sanding in IPA. I’m lazy and don’t sand so not been an issue, but worth knowing for those who do.

@estebannaranjo1788 2 месяца назад

how often do you change the filters of your mask?

@victormai5182 Год назад

Where did you get the metal basket for dunking in the IPA? The only thing I can think to search is deep fryer baskets but they arent the right shape of handle and are $30

@GrayScalpMiniatures Год назад

It came with my wash and cure machine. Maybe search for replacement wash baskets for the elegoo mercury and see if any come up.

@LifesDesign Год назад

Would you suggest using a resin printer in a garage with the door open? Or would you still use a mask?

@GrayScalpMiniatures Год назад

One of the issues I've seen come up is that there can be a blast of resin air when taking the lid off your printer, so theres still a chance of breathing it in. You're minimizing risks with the garage door open which is good, but depending on the weather you might start to get failed prints if it's cold. I'm currently moving my printers into the garage and I'll be using a grow tent and a vent to exhaust the air outside, so maybe something like that could work if you've already got things setup in the garage.

@user-me2zb1bz3u Месяц назад

Most important safety tip: g l u v z

@impguardwarhamer 5 месяцев назад

i would not recomend using a toothbrush. Toothbrushes will spray tiny bits of your cleaning solution up onto your arms above your gloves, leading to rashes. I speak from experience.