How to clean a CNC machine and Replace the Coolant! 

I'm glad he clarified that it was "RP" and not "Our Pee" because I was beginning to think that special additive wasn't so proprietary.

Ed has such a powerful stance! It's great to see someone both so keen and knowledgeable about what they do, and acting as such a great representative for their business. Good lad!

Man. It’s so nice to watch other people clean tanks. Started at a new job this year as an CNC machinist “apprentice” and in the first 2 weeks I cleaned 5 Mazak tanks. Not really a bad job. Just a super dirty job.

That was the cleanest dirty sump i have ever seen😂😂. He will probably faint if he sees our sump.

Funny I have spent the last 2 nights cleaning and scraping the goop in the sump of the big Monarch. Even after 3 flushes and a bunch of wire brush action it still looks like muddy slimy water. 1/2" of grease and coolant residue over an 18ft lathe is a LOT of dirt to clean up. I so wish my sump had been as clean as yours!!

Definitely bought a 1 micron filter after I saw the first 5 minutes of this vid for my shop vac in terms of sucking up oils and sediments. Thanks for this!

Not only are yor videos interesting and fun, but you also show how a responsible company deals with waste.

Absolutely unique content! Thanks a lot guys!!!

That was actually pretty clean sump. Still the cleaning was probably overdue, and you all did good job. Keeping it maintained regularly and tracked is important.

I can attest to Qualichem is great product. I run the synthetic in both cnc mills and cnc surface grinder, it's nice to have just one coolant sitting around.

Enjoyed this our grinders all have a variety of different sumps with different oil and coolant mixtures...Yeah my CHEM rep only gave me a paper tote bag at Christmas..That polo is looking sharp😆

pretty informative. Didn't even think that mold and other micro organisms could ever be a problem

Very interesting. Thank you.

Cleanest sump in the world

Great to see this whole process. Huge thank you. 'all coolant have a multiplier'. Humm I have not heard that from my coolant provider. Something to discuss with them.

My machinists hated cleaning day, my shop foreman said that the sumps smelled like a "sumo wrestlers jockey shorts" LOL. I question was, how do you know what that smells like. Thanks for sharing.

Gday John, this is a great subject, I thought there would of been more fine chips in the bottom of the sump, I expected to see quite a thick layer in there, great video as always, thank you, Cheers Matty

As a Maintenance Tech I had to actually shovel piles of chips out of a large Coolant tank because of a broken screen on the chip conveyor. It was a huge pain in the rear!

I had been using qualichem for few years now. Had great sump life. Then about 1.5 years I did a clean and fresh charge. They change make up because sump life sucks now.

This bro is jacked

imagine having a coolant system lol This comment was made by WD-40 gang

Good stuff! I just switched to 355D as well, supposed to be great for aluminum which is all I run. Would you be able to share that concentration chart?

very interesting

Impressive

Wonder if this would work on a CNC plasma table to keep the rust down on the water table.

What is the best way to wash the protective glass from the old coolant? When processing aluminum, a white plaque remains.

Haha, thanks for this. I literally just got my first used haas super mini mill in my garage and thought how do I clean this and this was first on the list

Fir... not gonna do it. Keep up the awesome videos!

Zero the refractometer to the water you are using for accuracy? That made me chuckle. In my shop we're luck if anybody ever actually pulls out the refractometer.

Is this good for grinding machines?

Was this done in a one day’s work? I’m about to swap coolants on a UMC750 from Qualichem to synergy 735 and I’m nervous cause I really want to make the transition to synergy 735 but I’m afraid to ruin the coolant with old coolant left in the machine. Wish me luck guys

First?? Always appreciate the work you guys put in to your videos! This is especially applicable to our admittedly nasty VF-2 at school. Thanks!

10 episodes from now they're gonna reveal that Ed was secretly the villain this whole time, to absolutely no ones surprise.

How make machine coolant replaced plan on excel sheet

What coolant? I am working on a lathe, that doesn't have any coolant. (This machine has a tank, but this tank doesn't work since 14 years)

That guy knows his shit

I think the cleaner then the rinse was a bit much. I change out every 3-4 years as well after switching to blaser. Ran cimcool before and it didn't have the sump life that blaser does. But I also take really good care of our sumps.

How much does it cost for this service?

When is your EDM coming?

Hey John, I noticed you switched from Qualichem Xtreme Cut 251C to Q-Cool 355D, any particular reason for the switch?

"... sometimes machining a lot of copper..." sheeeiiiit

Also, something he did not stress that should be is when charging the system, you MUST put water in first to fill tank, THEN add coolant to water.

i am running 3.5 years now same coolant. just top it up every now and then. I am not allowed to change becuase the tanks are 500 or so liters.

We struggle at our shop machining copper semiconductors because we can’t change or add anything to our cool based on SOP procedures required by the customer. Meaning we can’t use any cleaners or anti bacterial additives, Doesn’t make sense some higher ups that have no idea thinks it will ruin the part. Our cleaning process after the part is done would stop that but oh well🤦‍♂️

Ah yes the job for the apprentice besides making coffee.

Our machines are not the clean. we use Blazer something something, but we machine alot of different materials so that might why why they get so dirty some time to time :D

Seems rather excessive and very expensive when u factor in all the hazmat disposal cost i just suck out the coolant and rinse with water / remove chips and i only have to do that about every year and a half or so i highly recommend using oil skimmers and an air bubbler to extend coolant life

Your coolant is dirty until you have to cut coolant cheese out of your tank. I cleaned a mori vertical mill that hadn't had a coolant change in close to 10 years, not my fault I had taken over the machine and job/position from another guy. I literally had a black, brown and creamy white build up 4 inches think in the corner of the tank. It didn't have a nasty odor, but the consistency of it was disturbing. I swear I could see it moving and pulsating on it's own. I had to shovel it out of the tank.

First you pull the cover off and inspect the coolant. Then you find the FNG and tell him to clean the sump and put in the coolant. Then you go to the breakroom and get a cup of coffee. Come back, stare over FNG's shoulder, grunt semi approvingly, and go sit down until he's done.

🔧😊👍

You should evaporate the water out of the coolant before having a company dispose of it.

Coolant has 10 year life in a haas.

As a service technician I have zero customer who do any cleaning...ever... period. I was on a steroid iv this year to stop a huge rash after cleaning out a tank after 12 years of service ....I couldn't get the conveyor out it was a rusted blob

Nothing worse than when the door of a machine is opened and that sour milk/vinegar smell slams into you. Tells the story of how much the business cares about their coolant.

I watched this, and now I have guilt. I let my coolant and machines down. Thankfully they have no rights, so until Jonny 5 comes and smites me for robot neglect, I'm going to keep on feeling bad that it never quite makes it to the top of my to do list.

What's the purpose of the balls?

Really.. ? Can't I just build a shop pumped system with a magnetic motored pond pump, and a 5 gallon bucket sand filtration reservoir draining into a main tank... ?? My mom built mine.

Pure marketing video - useless. If I want to see something like this I visit the sellers website.

Like the channel, content and smart guy John... I just can’t take the title for this cleaning guy... Sales Engineer. Millions of people bust their asses to get their Engineering degree from a highly respected institutions with well accredited programs..... On the other hand, in some company somewhere, the company’s logo changes or for some other dumb reason, new business cards are to be ordered. Some deepshit decides he/she wants “Engineer” at the end of his/her. OK... if this is how it’s gonna be, then I title myself “The God of Sales Engineers” and I demand daily human sacrifice from my subjects... If not done as I commanded, I will rain down some ill-shit upon thee. The correct itle is “Sales Person”... Use it...

Rolltech Innovation manufactures machine coolant saver. Serious threats to productivity and health are bacteria and fungi which are commonly found in industrial coolants. This coolant bacteria filter has some advantageous features include: last a life time, with guarantee of extended life of coolant with bacteria filter - no consumables, no electricity, no chemical dosing, etc. It is a one time investment, ROI within 4-6 Months, Saves on input of fresh oil and disposal cost like etp treatment, or giving it to authorised recycler. These mineral oil based coolant are prone to generation of bacteria which produces foul odour, often from hydrogen sulfide [rotten egg smell]. Rolltech Innovation "Aqualogic" filter is an innovative and economical method of continuously controlling these micro organisms and the odour they generate. "Aqualogic" bacteria coolant filter consists of series of high-purity multi-metal fibres cased within a stainless steel tube. the dissimilar ions in the multimetal alloy bed undergo a natural electrochemical reaction, also known as an oxidation-reduction reaction. Which Kills the all the Microbial activity in the coolant 24/7 call us at +91-702-723-6191 or write to us at rolltechin(at)gmail.com

This is just another sales/marketing video...