How to Clean your CNC Machine and Keep it Running Smoothly

Подписаться 1,9 тыс.

Просмотров 6 тыс.

50% 1

In this video I will demonstrate how I clean my AVID CNC machine. Cleaning your CNC machine is essential in maintaining accuracy. Having a regular CNC cleaning schedule will prevent any potential problems and machine break-downs.
If your CNC manufacturer suggests a specific way to clean your machine, follow those directions. This instructional video is only a guide and demonstrates how I clean my CNC. The components on your machine may differ from those in this video. You may have ball screws, lead screws, drive belts, etc. You will need to take this into account and plan your cleaning routine accordingly.
As always, thanks for watching!
Russ Tyndall
Blue Line CNC
BlueLineWoodFlags.com
Below are a list of products used in this demonstration:
Shop Towels in a Box (Blue): amzn.to/3VSTpaV
White Towels in a Box: amzn.to/3VOjpUM
Isopropyl Alcohol, 91%: amzn.to/3P6J09G
3 in 1 PTFE Lubricant, 4 oz.: amzn.to/3FqpT73
Grease Gun with misc. Accesories: amzn.to/3XRY3b0
All-Purpose Lithium Grease: amzn.to/3BeAJdT

Хобби

Опубликовано:

4 дек 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 21

@MarkLindsayCNC Год назад

Great video Russ! Thank you for the reminder that I need to get on my machine and give it good wipe down and lube!

@BlueLineCNC Год назад

Lol! At minimum I blow mine off with an air line before each use. The service I demonstrated in the video, I do quarterly.

@RobSandstromDesigns Год назад

Well done. Made me think about the last time I did any real maintenance. Thank you for the reminder

@BlueLineCNC Год назад

Thanks Rob! I think too many of us overlook maintenance.

@randyfinfrock143 Год назад

Another great and informative video, Russ. Your shop and equipment continue to look fantastic - great job.

@BlueLineCNC Год назад

Thanks Randy!

@jonathansholar4437 Год назад

Great video Russ!

@BlueLineCNC Год назад

Thanks Jonathan!

@ncpackfan Год назад

Thanks, Russ! Great content as always. How do you maintain the rack and pinion and related parts?

@BlueLineCNC Год назад

Thank you! I really don’t worry too much about the gear track. Use an airline with a fine bristle tooth brush. Don’t put lubricant on it.

@swiftshift06 5 месяцев назад

After how many hours of run time do you do a cleaning/service like this? Great video, thanks!

@BlueLineCNC 5 месяцев назад

Difficult to say! I’ve never tracked the hours between cleanings. I suppose I should. I mostly go by how everything looks.

@timc2797 11 месяцев назад

I like that black hose connection unit where do I get one?

@BlueLineCNC 9 месяцев назад

One Guy in a Shop on ETSY

@bradleyheathhaysable 7 месяцев назад

How’d you decide on your channel name ‘Blue Line?’

@timc2797 11 месяцев назад

My machine when homing goes to the front right corner do u know how I can switch that to the front left corner?

@BlueLineCNC 11 месяцев назад

You didn’t mention what CNC you own. Check your owner’s manual. You should find instructions to change your home position.

@cokimi1301 11 месяцев назад

Isn't all that black stuff from the rails just grease? Also why lubing the rails if you also use grease? Not hating just asking thanks

@BlueLineCNC 11 месяцев назад

My grease is green out of the tube, so black indicates to me it’s dirty. By applying a very thin layer of 3 in 1, you are only ensuring the roller bearings run smooth. Necessary? Probably not but a little extra insurance goes a long way!